花卷不掉毛

Frontx

EDIT:The wings must be printed on 3 layers, otherwise the plane does not fly well. please check this out in BAMBU studioThe Airplane is printed upside down, after printing the model must be turned and the wings bent in the right direction<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492125/design/2024-06-18_0240861a185ae.png">&nbsp;another version of the mini plane. the first layer must have a height of 0.12, for greater strength. other layers are set to 0.08mm. Bend the rear wings under approx. 45°. The large wings can also be bent. Throw the glider up, then it flies far, suitable for years of use even into the wind. I also added another print profile with all layers 0.12mm, but it&#39;s not as good&nbsp;

mini airplane 3.0

玩具

WANGHENG-♛

&nbsp;countersunk screw<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_a26002bd42e2.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_cd483cb9e6f5c.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_650b33596269a.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_ce67c51351a91.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_4cf38055e154a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_46e6d54cbc465.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_1384995cef1c.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_a21fde6e9b729.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_631de67e13b3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_a4d63d5b0c917.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_7bfcc7003e9b6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_5a9eeb41f7d29.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_e9c79cbea83ea.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_32f889dcf8179.png"></figure>3M14mm   104pcs&nbsp;2M10mm   51pcscircumference 540mm width6mm transmission beltPETG is recommended for all materials【FFv8安装视频-哔哩哔哩】 https://b23.tv/fH2lnjc<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-15_2eded5b2c31e8.gif"></figure>&nbsp;ll<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_ce8c5639ae2c9.jpg"><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-16_92aa900b9e7ed.jpg"></figure><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495215/design/2024-06-25_40ae4a966cd04.gif"></figure>

Flaming Fox V8

牛逼

TravockMD

I designed this cable organizer so I can have it with me during travel since I hate tangled cables in my bags.  Designed for cables up to 2.9 - 3 mm cable thickness. The slot is just a bit narrower so the cable won&#39;t fall out. To avoid support, I designed it to be 2 pieces that snap together

Travel cable winder organizer

日用品

Krookr

<h2>Description</h2>This Silica Box is for the <a target="_blank" href="https://www.printables.com/model/392134-hydra-ams-enhanced-bambu-lab-ams" rel="nofollow noopener">AMS Hydra Mod</a>, but it also works perfectly with the standard AMS.&nbsp;It fits perfectly and the volume is larger than in other versions. There is also a version that support a Hygrometer. This is the Hygrometer I used <a target="_blank" href="https://www.amazon.de/dp/B0BKZXFDVX?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0BKZXFDVX</a>&nbsp;Each box holds around 100g of silica.&nbsp;<h3>Printing</h3>The version without Hydrometer prints without any supports. The Hygrometer version needs some supports at the top of the round cutout. I used tree support that starts from the print plate.The print profile I added is for the version without hygrometer.&nbsp;Disclaimer: This is a remixed model designed by Thomas: https://www.printables.com/model/423765-silica-dry-box-for-bambu-lab-ams-hydra-and-stock-v

玩具

牛逼

日用品

打印机配件