user_2674156003

Gunner Lee

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Bolt Action Pen

Office 

Illusions 

daniel.fiorica

I made a DIY trap for Carpenter Bees, and it worked really well. I modeled one using the same principles of the original and included threading for a mason jar and water bottle. Going to hang it up next to where they typically try and enter (same as DIY version) and see if it works! Not sure if Bees are as into PLA :)

Carpenter Bee Trap

Bee trap

hikree

This liner definitely fits the cupholders of a 2024 Toyota Corolla Cross and likely fits the older years but I haven't been able to confirm. I printed mine in TPU but you could probably print out of a stiffer material and it would still work. Print profile is for Generic TPU on a P1S.

Corolla Cross Cupholder Liner

Cars

Koni205

Controller Halter für 2 PS5 Controller.

PS5 Controller Holder

3DFolio

<h3>Model</h3>Central Park, NYC - TinyCity&nbsp;Whats included:+ 8&#34;x8&#34; &amp; 7&#34;x5&#34; 3D City + Frame + stand&nbsp;Creating these accurate models takes time and dedication, and your support means a lot! Here are some ways you can help:<ul><li>Check out my models: Download one and share some pictures!</li><li>Let&#39;s collaborate: Have a city in mind that needs a 3D makeover? Let&#39;s work together!</li></ul>By supporting my work, you&#39;re not just getting cool models, you&#39;re helping push the boundaries of accessible and realistic 3D mapping. So, thanks for stopping by!

Central Park, NYC - TinyCity 3D (New York City)

Cities

KG3Dee

Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>Please use designer print profiles as these are the only ones that are always up to date.&nbsp;Also, check out this in an <a target="_blank" href="https://makerworld.com/en/models/396440#profileId-297756" rel="nofollow noopener">AAA version</a> and the <a target="_blank" href="https://makerworld.com/en/models/198851#profileId-219450" rel="nofollow noopener">AAA Mechanical Battery Dispenser Slide</a>.&nbsp;Printed model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul><li>Main parts. 0.2mm layer height:<ul><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.&nbsp;1.<ul><li>Insert the lever in the casing. There is a slotted hole in the casing which needs to line up with the lever pin. Push to insert, and rotate multiple times both ways until the rotation is more or less friction free.</li><li>Repeat steps above for the other side.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_39cb8ba348c5c.png"></figure><figure class="image image_resized" style="width:16.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-16_696d5b597a4e5.gif"></figure>&nbsp;2.<ul><li>Insert the inner stoppers on both casings, protruding inside the lever groove, and insert the mid plate. The plate will keep the stoppers locked in place.</li><li>Do the same for the front stoppers, and insert the front plate.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_5da3f8c4a6d3c.png"></figure>3.<ul><li>Insert the handle. Check that the handle can move freely up and down.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_03b3c1c458c53.png"></figure>4.<ul><li>Insert the springs. They should be inserted as shown in the pictures, with the pin at the lowest point.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_28498c0d0830b.png"></figure><ul><li>Tension the springs and put the pin in the lever.</li><li>Insert the lower stiffener (Top in below picture).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7320db61e4d09.png"></figure><ul><li>Insert spring guides as shown. The flat one is friction fit into the cut-outs on the mid plate. The spring center one is dove-tailed.</li><li>Check the handle movement after this step, make sure it moves to its end (top) position by itself.</li></ul>5.<ul><li>Check the quality of the threaded bolt.</li><li>Use the printed tool to hold the leveling knob. Rest the bolt against a table and carefully, with no excessive force, turn the screw while holding the tool until it snaps free. Once free there should be minimal play in the axial direction. Do this for all knobs. If the knob is stuck, try the 0.2mm tolerance version.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_411dce1e012b4.png"></figure><ul><li>Trial fit the knob bolts in the guide rail threads. There might be some initial friction here, so enter the threads and turn a few degrees, then back again, then gradually increasing the turn for each go back and forth until the thread is completely set. Be patient here, don't use excessive force.</li></ul>6.<ul><li>Push in the leveling knobs in the casing. There is a slot in the knob and in the casing that should match up.</li><li>Use the printed tool, and twist the knob clock-wise until it sets. No need to overtighten. For the lower one you have to push the handle down to gain access.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-03-17_5afc523ed3444.png"></figure><ul><li>Insert the guiderail on the opposite side of the casing, and screw in the bolts. Do a couple of turns for all, then go back and gradually tighten in multiple goes until all bolts are seated. The guiderail and its position is what keeps the batteries rolling smoothly down when loading the dispenser. Too wide and the batteries will fly out, too narrow and the batteries will jam.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7ac74cca77c45.png"></figure>7.<ul><li>Final step is to install the last 2 stiffeners.</li></ul>&nbsp;Width adjustment:<ul><li>To widen the gap, turn the bolt clock-wise.</li><li>To narrow the gap, turn the bolt counter-clock-wise.</li><li>Start by turning all the bolts on full turn counter-clock-wise.</li><li>Grab your battery and insert it in the dispenser and hold it in front of the leveling knob. Adjust the knob so there is minimal play in the battery's axial direction. Continue this for all knobs.</li><li>Once done, release the battery from the top and observe its rolling down the slide. Adjust where necessary and your done.</li></ul>&nbsp;&nbsp;I advice using the original (designer) profiles, as these always have the latest changes incorporated.&nbsp;Would appreciate some feedback if this dispenser works with your batteries, or if you have any issues.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

AA Mechanical Battery Dispenser

Batteries 

tomsky000

<h4>Will the results printed by using the same printer and the same parameters be the same? Not always </h4>Test your printer's cooling capabilities. If you have cooling problems when printing, you can try enlarging the scale. These landmarks are from highest to lowest：Eiffel Tower(300m)Empire State Building(381m)Taipei 101 (508m)ONE World Trade Center(541m)CN Tower(553m)Shanghai Tower(632m)Tokyo Skytree(634m)Burj Khalifa(828m)&nbsp;inspired by <a target="_blank" href="https://www.thingiverse.com/minicityart" rel="nofollow noopener">minicityart</a><img src="https://makerworld.bblmw.com/makerworld/draft/634958/2024-03-04_5cc76f0677d58.png">

Cooling challenging (Landmark V2)

Novelties 

NUKDDD

NO BUNNIES WERE HARMED in the making of this little lucky charm. Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊&nbsp;The left hind foot of a rabbit and the elusive 4-leaf clover are often consider as symbols of good luck. This imaginary bunny rabbit stepped on one before losing its adorable foot…so lucky you! Great basket stuffer this easter or st patrick's day. But it could be a bear, a cat or dog paw with hearts on it; it adapts to any gift giving occasions.&nbsp;It easily floats with 2 standard house keys! Please do test it to make sure your keys aren't too heavy, don't lose something precious because you didn't test it before taking it out to open water.&nbsp;You can support me by purchasing <a target="_blank" href="https://amzn.to/4cpaXof" rel="nofollow noopener">the key rings I used</a> in the video and pictures, I may earn a small commission.&nbsp;47 mins on x1/p1 and 1 hour on the mini, support at the bottom to keep it from tipping over. Make sure your plate and nozzle are clean.

4 Leaf Clover Floating Key Fob

Keys

Ritz.Prints.3D

Bedside Moon night light&nbsp;wanted to make a light but everything I could find didn't use the electronics I already had ( they also really cheap) so I decided to remix one to work.&nbsp;(very simple wiring for light can be found just by searching the products used on youtube)&nbsp;I have included all electronics used below as well as links to each item to ensure accuracy of size and specs&nbsp;make sure to print the stand upside down with supports enabled.&nbsp;You will need to glue the stand clamp on the base of the moon. I didn't feel like joining the models as I didn't want the clamp to need supports to print&nbsp;&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://amzn.to/3SQtC4v" rel="nofollow noopener">Electric Wire</a> <a target="_blank" href="https://www.aliexpress.us/item/3256805789354967.html?spm=a2g0o.productlist.main.1.61b24f5b2mYvTC&algo_pvid=897616e5-b3d1-42e8-a1b3-e67aa66fdf6d&algo_exp_id=897616e5-b3d1-42e8-a1b3-e67aa66fdf6d-0&pdp_npi=4%40dis%21BRL%2130.53%2118.33%21%21%215.93%21%21%402101eab017019691794703267e148c%2112000035131619788%21sea%21BR%212084664700%21&curPageLogUid=UtDioi75ioQZ&gatewayAdapt=glo2usa4itemAdapt" rel="nofollow noopener">LED Socke</a>t <a target="_blank" href="https://www.aliexpress.us/item/1005003761125881.html?spm=a2g0o.productlist.main.3.f12e3db3pLCMFp&algo_pvid=ae4a043a-8f52-41e5-84da-4188f62c9566&algo_exp_id=ae4a043a-8f52-41e5-84da-4188f62c9566-1&pdp_npi=4%40dis%21USD%214.04%212.18%21%21%214.04%21%21%402101e9d217019696205775125e8ff8%2112000027077430226%21sea%21US%21893686799%21&curPageLogUid=OKDs9NGFvTPO&gatewayAdapt=4itemAdapt" rel="nofollow noopener">LED Light</a> <a target="_blank" href="https://amzn.to/42MTTnX" rel="nofollow noopener">On-Off Switch</a> Soldering Iron. Solder <a target="_blank" href="https://amzn.to/3Szcqz4" rel="nofollow noopener">Electrical Plug (2.1mm DC Jack 12V)</a> <a target="_blank" href="https://amzn.to/3Sy3ABL" rel="nofollow noopener">Power Supply (12V 1A)</a>

Moon Lamp 

Night lights

Augustas

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000136916/design/2024-03-23_e3aef21a74483.png"></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/augustas" rel="nofollow noopener">https://www.buymeacoffee.com/augustas</a>&nbsp;This stylish and functional 3D printed car trash can is the perfect way to keep your car clean and organized. The sleek design features a patterned side panel and a movable lid flap for easy trash disposal. It can also be used as a desk trash can.Features:<ul><li>Stylish and functional design</li><li>Patterned side panel adds a touch of personality</li><li>Movable lid flap for easy trash disposal</li><li>Can be used as a car or desk trash can</li><li>Easy to print and assemble</li></ul>Printing Instructions:<ul><li>Recommended filament: PLA or PETG (with a 0.2mm nozzle)</li><li>Layer height: 0.2mm</li><li>Infill: 20% (or higher for a more durable trash can)</li><li>Support material: Not required</li></ul>Enjoy your new 3D-printed car trash can!&nbsp;!! This is my model I created it following Brandon Santana YouTube tutorial, I Added some details and made it fit more loosely. But it is still my own design please do not flag this as a copyright!!Link to the tutorial : <a target="_blank" href="https://youtu.be/ci4JB_NZ7ks?si=zwvmFfeb0jTwzHsA" rel="nofollow noopener">https://youtu.be/ci4JB_NZ7ks?si=zwvmFfeb0jTwzHsA</a>.

Car Trash can

JSchwieb

Modeled up some coasters to match the rest of my MCM decor in the house. &nbsp;These have lips on the bottom which allow them to be stacked. &nbsp;I have uploaded the models without the “S” as seen in the photo. &nbsp;They can be pritned without supports but the stacking lip will vary in quality depending on what filament is being used.

Stacking Mid Century Modern Coasters - MCM

Living room

Introducing the Makeup Brush Cleaning Mat, featuring an easy-to-use design. With its textured finish, this mat provides a thorough and deep cleaning experience, effectively removing makeup residue from your brushes and sponges.&nbsp;Say goodbye to stubborn stains and hello to refreshed, purified tools.

Makeup Brush Cleaning Matt

Makeup 

Dan_ID

This is a stand to hold your Apple Watch Charger. Works with all versions of the Watch charger (USB-A and newer USB-C) and all versions so far of the Watch including the Ultra. It may not work with all cases.Putting some rubber feet on the bottom will help with sliding.&nbsp;Printing Tips:<ul><li>Best in Matte PLA</li><li>4 Perimeters with 20% Gyroid Infill</li><li>CHECK YOUR FIT: It is meant to fit the Watch charger with a slight press fit so you may need to scale it up or down depending on your settings and filament. I've scaled the model from the first version posted.</li></ul>

Apple Watch Charging Stand

Apple Watch 

CutMaster

This is a support to be able to hang a hanger on another hanger. I reinforced the eyelet to resist the force exerted by the metal hook of the hanger, and also reinforced (bulged) the part that supports the other hanger. I advise you to print it in 100% infill for better resistance.

Hanger Hook for... Hanger

Laundry room

Muskoka Research

<div><h1>Summary</h1><div>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLEAdditional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stlAssembly (See Pictures):<ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"> Duramic PLA+ / TPU </a><pre><code> Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

Workshop 

squinn

Accessorize the light switches at your home or office with this intriguing mechanism that utilizes a planetary gear! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_ry94myxyz3wf.gif"></figure><figure class="image"></figure>All parts can be 3D printed (no supports are required), and the design is fully snap together - so no glue is needed. I printed the five gears as a unit (using the attached “Planetary Gears.stl” file), which shows their proper orientation for assembly. But, if you'd rather print the gears independently (or are worried that a roughly .2 mm gap tolerance between the gears may cause an issue on your printer), then an individual STL is provided for each gear as well.&nbsp;I designed this model from scratch, but I want to call out “Engineer Dog” who showed off a <a target="_blank" href="https://engineerdog.com/store/gear-light-switch-cover/" rel="nofollow noopener">similar idea</a> several years ago. Some notes on assembly follow:<h4>Step #1:</h4>Place the gears on the base plate in the orientation shown below, and note that the “planet gears” do have a right-side-up (due to the use of a double-helix gear style, which is part of what helps the entire piece hold together without needing additional brackets):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_lqswpeb5cgt8.jpg"></figure><h4>Step #2:</h4>Place the rocker arm over its pivot point, with the long part of the arm facing towards the bottom of the plate:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_vlm5e3qlpybs.jpg"></figure><h4>Step #3:</h4>Swing the rocker arm around and gently lift it over the top of the actuator peg on the sun gear:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_d7o0akdrr00x.jpg"></figure><h4>Step #4:</h4>Press the three gear nuts through the planetary gears until they snap into the other side of the base plate:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_b7c09821a7k7.jpg"></figure><h4>Step #5:</h4>Unscrew your original light switch plate cover, and then attach your new planetary gear light switch cover using the same screws from the original:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-26_ce0w4vm0kbkr.jpg"></figure>

Planetary Gear Light Switch Cover

Gadgets 

Attach this to the top of any standard mason jar, and then enjoy sliding multiple coins down the ramp - watching as they accelerate towards the apex of the vortex.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-23_9q5fo4bybzqi.gif"></figure><h4>Printing Notes:</h4>This is an easy print that requires no supports. The STLs are oriented the way they should be placed on the print bed, and I'm also attaching convenient print profiles. For some extra fun, attach two or three slides and then try and start multiple coins concurrently!<h4>Assembly Notes:</h4>To attach the slide you'll want to get the “Slide Mount” part slightly started on the back of the “Slide” piece first, before you attach it to the funnel (see related pictures below). It's designed with just a small amount of tolerance so that it will hold tightly, and therefore may require a slight tap from a hammer to first get it started (although for me it easily slid on). After you have it started then place the slide onto the funnel, and finally push the slide mount the rest of the way to secure it on the funnel.<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-23_v0zmc0h6tnpe.jpg"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-23_0ry1ouidknse.jpg"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-23_f9emdp7040me.jpg"></figure>

Coin Vortex Mason Jar Lid

Coins

My <a target="_blank" href="https://makerworld.com/en/models/230911#profileId-248067" rel="nofollow noopener">Easter Bunnies evolved too soon</a> and couldn&#39;t join the hottest Easter party this year so…Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊 Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;His &amp; Hers Easter Bunny Rabbits LED Lights. You don&#39;t need an AMS, single color looks great as well.&nbsp;Larger Bunningtons <a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab&#39;s Lamp Kit, available in the online shop.</a>&nbsp;Printed with <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Bambu&#39;s PLA Matte</a>&nbsp;The Bunningtons and the Rabbitsons may look familiar but they have a new pattern, in the form of his and hers, or his and his or hers and hers, different all inclusive ways to display, all look great day and night. He&#39;s wearing a bow tie and she&#39;s wearing a bow on her head.&nbsp;These bunnies are ready for any occasion, not just Easter. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;Please read:<ol><li>each holds a LED tea light up to 40mm diameter. I recommend tea lights with timers, make everything much more enjoyable.</li><li>the Rabbitsons don&#39;t need a base and don&#39;t pair with any of the bases I&#39;ve released so far. Simply place it over a LED tea light.</li><li>the Bunningtons will pair with either the feet or nest bases with or without threads, which holds the LED tea light.</li><li>both versions can be printed in 2 colors using an AMS or in single color without, I think both look pretty great.</li><li>highly recommend printing the <a target="_blank" href="https://makerworld.com/en/models/112380#profileId-120319" rel="nofollow noopener">AMS Purge Calibration V2</a> by <a target="_blank" href="https://makerworld.com/en/u/3414625385" rel="nofollow noopener">Ciuf_Ciuf</a> with the colors you&#39;re using before printing anything multicolor to save on filament and print time. Tell him I sent you, he doesn&#39;t know me, but he will if you tell him I sent you hahaha</li><li>To print in single color, simply choose the same filament before sending it to your printer and it&#39;ll print without any color changes without the prime tower. It&#39;ll also reduce the overall print time.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/810737/2024-03-09_b84b6185a8db5.png"></figure>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Bunny Lamp wif bow

Easter

SabreDesign

Christmas tree ornaments for vase mode printing.  When using light or transparent filament you can use a tea light to lightup the tree.&nbsp;The big tree is 150 mm tall and the small tree 100 mm&nbsp;If you want to support me or get a commercial license you can join a patreon membership: https://www.patreon.com/SabreDesign

Christmas trees (vase mode + tealight compatible)

Christmas 

SaVo3D

This is my version of a pringles tray!Shove the tray into the can and pull out the tray with the pringles chips.&nbsp;29.12.2023: I uploaded a updated version. This version is shorter in length, so you can leave the tray inside and close the lid. Also i decreased the diameter by a few mm and increased the wall thickness.&nbsp;Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For best build plate adhesion, i use a strong hairspray. Apply a thin, even coat of it. I repeat the cleaning and reapplying of hairspray every 5-6 prints.

Pringles Tray

kitchen 

Riffcat

Description for commercial use of model of sunset 3d designThe payment is twenty dollars Please make a deposit via PayPal Link: <a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a><a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a>Commercial use is indefinite if you pay $20 onceIf you pay $20 once, the model and all of my models are commercially available Also, the model to be released is commercially availableThere are already a lot of models coming out and modeling is doneAlso, if you want, we will give you a model file that will be releasedLet's make a profit from my model. Thank you for reading this For commercial use, please contact sunset_3d_design and pay the amount. Please tag me when posting on Instagram.<a target="_blank" href="https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare" rel="nofollow noopener">https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare</a>Hello, I'm sunset 3d, a student and designer. Let me introduce my dragon.<a target="_blank" href="https://www.paypal.me/sunset3d" rel="nofollow noopener">https://www.paypal.me/sunset3d</a> If you donate a little, it will be a big help in making a wonderful dragon.It's free of charge for 1-2 days for multiple people to print out and be happy. I was inspired by the work of a dragon.It was a perfect design and a rewarding modeling, but there was a lot to learn.Also, we considered the user's situation as much as possible.100% printed long! If you reduce the size of the model too much, the cross-section may be fused. You can print it out with 0. Cool, right?And it moves so smoothly. I think it's the best model I've ever made.I love putting new designs on cults for everyone to enjoy; I hope this is the first of many! It's my first 3D modeling, so I hope that I can improve over time and that many people like my model at least once.This work is protected by copyright. However, if you personally send an Instagram messenger and pay the settlement fee, you can continue to sell it.Thank you.I printed it with 4 layers of wall and 0% imprinting (I succeeded with 0% imprinting, but I recommend 10% because it's a little more powerful.I recommend using an in-person pen.Model downscaling may mean fusion of cross-sections, and upscaling may require support. It was tried and tested on a 100% scale, and the printing was excellent.For best results, ensure that the printer remains calibrated, horizontal, and folded. And please share what you made!

ARTICULATED flame dragon

Dragon 

3D Prints This Week

Link from Tears Of The Kingdom Night Light / Lithophane / Super easy to print&nbsp;Here is the link to the night light used for this print. It slides right on and works great!&nbsp;https://amzn.to/45emxxH

Zelda Night Light / Tear Of The Kingdom / LIthophane

Lithophane 

Biochem

This pencil holder is inspired by the many landmarks in the world that use Ionic order architecture such as the Temple of Athena Nike, the Erechtheum and the Colosseum. The Ionic order is one of the three orders of classical architecture, the others being Doric and Corinthian.This organizer is modelled to the exact dimensions of the Greek Ionic ColumnsThe column has 24 flutes around the edge with a diameter that encompasses 12 degrees of the columnThe shape of the base of the column adheres to the exact ratios of the Ionic Order Columns as well.A great gift for anyone, especially those who are interested in history or architecture

Ancient Column Pencil Holder / Organizer

Organization 

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

Phone accessories 

Card wallet with added stripes texture/pattern.Link to Hugo profile: makerworld.com/en/u/1019415998

Cascade card wallet V1.2

Wallet 

lionblaze3120

Folding container for maximum 30 thin/medium/heavy picks. I used ordinary fender picks, the box lid closes perfectly on the top of each pick so they don't fall out of their slots.&nbsp;Print instructionsPrint it in place with no supports or assembly needed. The model shown was printed in Glow in the Dark PLA with 10% infill and .2mm layer height - any higher than that might make the hinge excessively clicky or not move at all.Once removed, gently bend the hinge until it clicks and should rotate freely.

Print-in-Place Guitar Pick Holder Box

Guitar

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

Music 

YogiTech

Small print in place box/container for carrying jewelry, rolling cigarettes&#39; or anything else that fits. Has a hinge that can be printed in place and a snap locking mechanism. &nbsp;Bridging is involved you could print without supports.Print in this orientation: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000038255/design/2023-10-10_ycpgwbr1sa6o.jpg">

Box - small and print in place

Boxes 

recspeak

Modeled after a tin “chamberstick” that my daughter wanted. Accepts a 25mm diameter candle.

Chamberstick

Candle holder 

wuguigui

Updated 20240424Someone asked me for English days of the week on the box, now we have it, download the files in the folder&#34;Week Days&#34;, and the print profile is added as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173852/design/2024-04-24_c6cf03750f338.png"></figure>_________________________________________________________________________________________Updated 20240309According to the feedback of several users, I modified the design of the inside pot(2 sections and 3 sections), and fixed the issue of the space inside that caused the pills of different sections to mix. The cap also changed to adapt to the new inside pot design.Please down it again. BTW, the new cap&#39;s lock structure makes it a little tight when screwing in, please add a little more force._________________________________________________________________________________________Updated 20240307Someone noticed that the thread in the cap has no &#34;Lock&#34; point, the reason I have commented in the &#34;Comment &amp; Rating&#34;. Now I updated the new cap model and print profile with the lock point to make it safer to use._________________________________________________________________________________________Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is a block pill box that can help people to organize the administration time for daily life or during travel.Easy to assemble and can be printed with no supports.There is a label attached in the documentation, you can print it on A4 size paper and clip it, write the information on it.Recommended filaments: <a target="_blank" href="https://shrsl.com/4duvx" rel="nofollow noopener">Bambu PLA Basic,</a> <a target="_blank" href="https://shrsl.com/4duvd" rel="nofollow noopener">Bambu PLA Tough,</a> or <a target="_blank" href="https://shrsl.com/4emet" rel="nofollow noopener">Bambu PETG</a>Note: Not suitable for pills that are prone to dampness.<a target="_blank" href="https://www.bilibili.com/video/BV11J4m147NH/" rel="nofollow noopener">B站视频介绍</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173852/design/2024-02-06_3b924a7f6b766.png"></figure>Watch the video to get more details.<figure class="media"><div data-oembed-url="https://youtu.be/IfdBr0LGKqE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IfdBr0LGKqE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>I have tried times to get a nice result, both in structure and operation. Hope to help people who have the needs.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173852/design/2024-02-06_9f0de195a5383.png"></figure>

Block Pill Box

Medicine 

MATRIXx

Remote holder /Fire tv stick /Apple TV

PZI 3D

Phone Speaker AmplifierFit with for phones with a maximum width of 82mm and thickness of 14mm

Phone Speaker Amplifier

Phone stands

Roland Deschain

I loved the concept behind <a target="_blank" href="https://www.printables.com/social/11728-lukes-3d/about" rel="nofollow noopener">Luke's 3D's</a> original model but it didn't fit my daughter's toothpaste. I also found the model quite hard to assemble as the tolerances were tight and there was little to no horizontal expansion (elephant's foot) compensation built in.So while I was lengthening the model I decided to make the following improvements:<ul><li>Increased shaft and body length by 10mm</li><li>Increased tube slot width on the shaft and body slightly</li><li>Added chamfer to all surfaces that touch the build plate to compensate for horizontal expansion</li><li>Added a bump on the shaft to prevent the tip from coming out while removing the tube</li><li>Stiffened up the ratchet arms</li><li>Improved aesthetics (subjective :))</li><li>Less post processing is required for assembly</li></ul>Warning: If you print a third party profile you may not be getting the latest version or the highest quality print. &nbsp;If you like this project, please don't forget to ❤ Like and ★ Rate! <h4>Printing tips</h4>I've been printing the bodies in PLA and the handle, ratchet, and shaft in PETG.<ul><li>0.4mm nozzle</li><li>0.2mm layer height</li><li>Support is not required</li><li>Print as shown in the attached screenshot (widest flat faces touching build plate)</li></ul>

Ratcheted Toothpaste Tube Squeezer

Bathroom 

Special Printing Services

Balance tetris with two versions of box  Print 4 pieces of every tetris-piece, it will fit easily into krabicka_low. There is also krabicka_low_large for those who want more than 4 pieces in set (tested with 6 pieces of every tetris shape).I added a pause in layers of lid in the print profile, so you can change the colors of filament and make “balance TETRIS” sign in a different color. Start with color of lid, then color of sign “TETRIS”, next is color of “balance” sign and then back to color of lid. AMS version will be ready soon. I created a new version of the box, which is better designed and brings another load of fun when putting the pieces inside. <a target="_blank" href="https://makerworld.com/en/models/155382" rel="nofollow noopener">https://makerworld.com/en/models/155382</a> Enjoy

Tetris balance game with box

Games

New Axiom

Witch´s cauldron is a nice decoration with tea lights or a great candy pot for Halloween 2023! Description:This cauldron is designed for printing without an AMS. But of course you can use your AMS for this cool piece.&nbsp;<ul><li>At first print the parts ring and two handles. I used 0-2mm layers. Support is for the rings required.</li><li>As second print the main cauldron. Attention: A print brake is necessary at layer hide 165mm by 100% scale and 82,6mm by 50% scale! After the brake fit the ring on the cauldron.</li><li>Continue the print of cauldron.</li><li>As third print the cover, called slime. For better printing and to avoid a huge amount of support material, I recommend to cut the slime in two parts and glue them after printing.</li></ul>As example see my uploaded 3mf file, called “cauldron_100%.3mf”.&nbsp;Trick or treat and happy Halloween 2023!

Witch´s cauldon / Halloween candy pot

Halloween 

please give me a 👍🏻 if you like this, even if you don't download this, it’ll help more people discover this. thanks so much!&nbsp;Super easy to assemble, from print finish to launching the propeller in literally seconds.&nbsp;New Toroidal Poopeller now avaible as STL and print profile. If you're turned off by the Poopeller, I have <a target="_blank" href="https://makerworld.com/en/models/80548#profileId-85621" rel="nofollow noopener">normal ones here</a>. You can stack up to 4 propellers and launch them at the same time! Try it!&nbsp;<figure class="image image_resized image-style-side" style="width:41.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/276386/2023-12-02_2c1a8eaac8d9b.gif"><figcaption>I didn't even pull that hard.</figcaption></figure>This is really about the Spiral Launcher, but have you ever seen shit fly or wondered what it looked like when the shit hits the fan? The faster you pull, the farther it flies. You'd be surprised how THIS SHIT FLIES! I sure was!&nbsp;Easy to print, no support and no other hardware or complicated assembly to worry about, put the spiral stick in the handle and snap on the cap and you're ready to send some shit flying all around your house and yard and park, etc.IMPORTANT: I know you're smarter than this, but…Find the arrow on the handle and insert the stick from there, refer to picture #4. Print with a rigid material like PLA plus/tough. Always use safe practices when playing with this. By downloading and playing with this flying toy, you're agreeing to exempt the designer from any personal or property damages or loss you may cause.How to use after assembly:Put the poopeller on the spiral stick, upside down works too, maybe even betterFind the small arrow on the handle and insert the rack, face the teeth toward the arrow, put the rack in gentlyPoint the tip of the handle at the direction you want the projectile to go. But wind will always win, always.Please be careful the first time, especially indoors, you've been warned.&nbsp;Unlike other propeller launchers, this one uses a mini version of the spiral from <a target="_blank" href="https://makerworld.com/en/models/61429#profileId-63941" rel="nofollow noopener">The Fast and Furious Fudge</a> and combines it with the mechanics of an ordinary propeller launcher. As you pull to turn the gears it rotates and pushes it forward, a TRUE launcher, sending this shit high into the sky.

The Spiral (assemble in secs) Propeller Launcher Toy

Toys

Hugo

THIS IS THE ORIGINAL MODEL, I NOW UPLOAD HERE AND ON PRINTABLES SO THAT PEOPLE CAN'T STEAL MY MODELS FOR LIKES !&nbsp;I designed this crate to store objects around my house. The 4 sides are snapped in place during assembly. When fully open, the 4 sides snap into each other to keep the crate sturdy, and it can easily be folded for storage.The dimensions are 15x10cm but it can easily be scaled up if needed, the snap fit should work with scaled versions. The height is 8cm when fully open and only 12mm in the folded position.The mechanism was specifically designed to be 3d printed in a particular orientation, to be as durable as possible, especially if the crate is opened and folded multiple times. &nbsp;<h4>Printing and Assembly</h4>&nbsp;Parts : Print 1x Bottom, 2x Short_side and 2x Long_sidePrinting profile : I printed all 5 pieces using the standard PrusaSlicer profile with 10% infill.Orientation : The STL files already have the right orientation.Supports : No support neededMaterial : I used PETG for durability but PLA is fine as wellPrinting time : Around 7h30 for all 5 pieces at 0.2mm per layer on my MK3S&nbsp;Assembly :  On every side, the face that was directly onto the print bed should be facing ouside. The sides are snapped into place on their pivot point. It is a tight fit but it is important for the crate to then stay in one piece. You must press quite hard, if it's too hard you can sand the pivot a bit.<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/606945/2024-02-29_8kb0nklcwmzx.png"></figure>To open the crate, first open the 2 long sides, then open the 2 short sides and snap then into the longer sides.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/606945/2024-02-29_bo3pvaoh05cj.png"></figure><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/606945/2024-02-29_ewcyrth5hz2r.png"></figure>

Foldable and stackable Crate

Dave_3dprints

Kit-card Nerf Gun (working model)The CMR Lab collaborated with Mark Rober (<a target="_blank" href="https://www.youtube.com/watch?v=9c2NqlUWZfo" rel="nofollow noopener">Watch his video</a>) and his team to develop the smallest operational Nerf blaster in the world.This print is the ¼ -size version, kit-card version measuring roughly 10x6 cm.It's important to use PLA or nylon filaments so as to get the best mechanical properties out of this model.&nbsp;NO assembly required (8 bullets are on the build plate)&nbsp;Update: some users are reporting some dimentional inaccuracy of the darts so i suggest printing the "smaller darts by @toiavalle"

Kit-card Nerf Gun

Play guns

Wickieprints

Made this different Benchdogs.Please enjoy them.There is a small one, a double one and a 90 degree hook&nbsp;You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: <a target="_blank" href="https://www.patreon.com/wickieprints/posts" rel="nofollow noopener">https://www.patreon.com/wickieprints/posts</a>

Festool MFT Benchdogs

Festool 

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

Bambi p1s

STomHacks

I created this suspended hand artwork using bridges for the strings. You don't need any supports. It prints in 0.2mm layer height and wall generator set to Arachne in Bambu Studio. The easiest way to print in multicolor is to use the full model and apply the color you want for the strings on the entire model and then apply the other colors to the structure and the hand.

Office

Illusions

Bee trap

Cars

ps5

Cities

Batteries

Novelties

Keys

Night lights

Car

Living room

Makeup

Apple Watch

Laundry room

Workshop

Gadgets

Coins

Easter

Christmas

kitchen

Dragon

Lithophane

Organization

Phone accessories

Wallet

Guitar

Music

Boxes

Candle holder

Medicine

Living room

Phone stands

Bathroom

Games

Halloween

Toys

Organization

Play guns

Festool

Bambi p1s

Halloween