user_2650835355

AiWen文创-OF酱

一个九龙壁的微缩摆件~A miniature ornament of the Nine Dragon Wall~

九龙壁

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

ifair

apex3D

After getting tired that all plastic scrapers are done after one use I finally decided to use metal scraper that came with the machine. however I did not particularly like the design of the original scraper BambuLab provides on microSD card/website - see model <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/Links-to-STL-models" rel="nofollow noopener">here</a>.&nbsp;I decided to model my own which was inspired by Wera tools I love. It is nice design which fits really well into your hand.&nbsp;UPDATE (2024-03-08)As requested by some I made a <a target="_blank" href="https://makerworld.com/en/models/237518#profileId-253541" rel="nofollow noopener">stand</a> that fits my design… &nbsp;UPDATE V2 (2024-02-03)Based on the feedback from community here and some more though into the design I modeled V2 of the scraper.Also you can find info at the bottom how to use it to avoid damage to your plates.<ul><li>Improved geometry at the bottom</li><li>Tweaked dimensions of finger rest and added indented arrow to prevent wrong orientation</li><li>Added logo to both sides (AMS version only)</li><li>Increased layers for logo for AMS version (to prevent color bleed)</li><li>Lowered indent for magnet so it protrudes just tiny bit (stronger magnet force)</li></ul><figure class="image image_resized" style="width:29.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/662366/2024-02-03_d4a9546ae3269.jpg"><figcaption>Improved design + indented arrow</figcaption></figure>And there is one more thing… I also created honeycomb ultralight and hopefully very cool and stylish version! <a target="_blank" href="https://makerworld.com/en/models/169754" rel="nofollow noopener">check it out!</a>&nbsp;FEATURES<ul><li>Cool Wera design</li><li>Easy to print an assemble (no more confusing where does the part go from the original model…)</li><li>No supports, flawless print</li><li>Hole so you can hang it if you wish</li><li>Dedicated space for the magnet</li></ul>&nbsp;WHAT DO YOU NEED?Well nothing! You should have everything already when you purchased your printer.<ul><li>18g of material (PLA is just fine)</li><li>2x screws for scraper</li><li>Blade</li><li>1x magnet (optional)</li></ul>HOW TO USE IT?As the original model also this one can be used from both side, but it shouldn't! I was thinking about poko yoke solution, but that would hinder its functionally so here is an example how to use it. On top of that I added arrow to the part where fingers rest to make it more obvious.&nbsp;<figure class="image image_resized" style="width:65.31%;"><img src="https://makerworld.bblmw.com/makerworld/draft/662366/2024-02-03_b4d2d3df686c2.jpg"></figure>I would not recommend using this scraper of textured plates and would be very very cautions on smooth PEI to. I think it is ideal for cool plate, but could not find any information from BambuLab regarding the use case, so that is only my opinion…&nbsp;&nbsp;&nbsp;&nbsp;

Bambu Scraper  V2 (Wera inspired)

实用

3DPrintWolf

Greetings and welcome to my workshop.&nbsp;I’m going to show you my version model of Sylveon model V.1&nbsp;&nbsp;!!!!!!This is very important when you want to print a model, you must use the wall generator Arachne!!!!!! Beautify your collection with our geometric low poly 3D print file of Fairy-type Pokémon. This design conveys the charm and magic of the Fairy-type Pokémon with smooth, sparkly lines, creating a charming, magical look. Great for Pokémon lovers who enjoy charm and magic. Note: i have try use AI from Photoshop Please like, comment, rate, and use this STL file. Your rating will make my model more popular and help me create more STL files for free. Thank you for supporting my model. If you enjoy it, please download and share it. You can message me if you want a new sign or line art STL. I will make it and upload it fast.&nbsp;Sign Playtoz / 3dprintwolf

art

ifair

实用

好看