Boqiansteam

梦龙

Tank T72

坦克

Stephanos

<h2><span style="color: #E14747"><u>NEW V2 NOW AVAILABLE!</u></span></h2><h4>Improvements:</h4><ul><li>New angled blade, allows for better ergonomics and comfort scraping at a lower angle</li><li>No supports needed</li><li>Added hole for hanging</li><li>New long handle version</li><li>Improved tolerances</li><li>Combined print profiles for Default, M3, and M3 insert versions</li></ul><p>STEP files for the new V2 short and long handles are also now available</p><p>—</p><p>&nbsp;</p><p><strong><u>About</u></strong></p><p>I wasn&#39;t able to find a scraper handle that I liked so I decided to make my own. Made to work with common plastic blades which can be bought and replaced for cheap. Handle allows for tool-less swapping of blades with a satisfying click in place.</p><p>&nbsp;</p><p>This handle makes use of the screws for the Bambu scraper that comes included with your printer. If you do not have them (or want to make more scrapers), an alternative version for M3 screws as well as M3 inserts is also provided.</p><p>&nbsp;</p><p>If none of the above works for you, I have additionally provided the STEP files for you to remix and customize to your liking.</p><h3>Notes:</h3><p>The new V2 blade clamp prints standing up at an angle, <strong><u>please ensure your bed is clean</u></strong> and has good adhesion prior to printing.</p><figure class="image image_resized" style="width: 25.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_a49974fae1833.jpg"></figure><h3>Assembly</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-19_7a698af830df4.gif"></figure><p>&nbsp;</p><h3>The Blades:</h3><p>Printed blades aren&#39;t as durable as the injection molded razor blades and it is much cheaper and economical to buy a pack of blades rather than printing them out which is why I have not provided a model of the blade as part of the print profile. You can find these razor blades through Amazon, AliExpress or maybe even your local home hardware store. Note it is much cheaper to buy from AliExpress, but you will need to wait for shipping. Prices and availability may vary depending on where you live.</p><p>&nbsp;</p><p><strong><u>Amazon (Canada)</u></strong></p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_6413e3807416.png"></p><p><strong><u>AliExpress</u></strong></p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-03-12_7e02ec478f51b.png"></p><h3>Changelog</h3><p>2024-02-24 - Initial upload</p><p>2024-02-27 - Added assembly instructions</p><p>2024-03-01 - Added 0.12mm profile</p><p>2024-03-12 - Upload new V2 version</p><p>2024-03-19 - Update assembly animation</p><h3>Need to clean up flow calibration lines quickly? Larger version is also available</h3><p><a target="_blank" href="https://makerworld.com/en/models/207326#profileId-431134" rel="nofollow noopener">https://makerworld.com/en/models/207326#profileId-431134</a></p><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201434/design/2024-02-26_db56680f7dbd2.png"></p><p>&nbsp;</p>

Plastic Razor/Scraper Blade Handle

a1mini

martin.taichl

<p>This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have the solar panels extended. It also comes with stand. The different colored parts are separated for easier printing. <br><br>In the suffix of the files, there are color codes:<br>w-white<br>d-dark<br>b-black<br>g-grey<br>bl-blue<br>go-gold</p><p>For the assembly, please have a look at the following video.<br><br> </p><figure class="media"><div data-oembed-url="https://youtu.be/UJ_ObCkH8Dk"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/UJ_ObCkH8Dk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Space Shuttle Endeavour

火箭

3dprintdude

<p>This is a kit card of a glider. It glides very well if weighted properly. I made this because I saw many kit card airplanes that did not fly and wanted to make one. It <strong><u>must be printed with a 0.05 mm layer height</u></strong>. If the glider nose dives then print out the light weight securer. If the airplane flips backward print out the heavy weight securer. (also make sure that the wings are slanted back to provide lift. If they are slanted forward then the fuselage sides need to swap)</p><p>&nbsp;</p><p>Some recommendations for this print are.</p><ul><li>Clean your print bed before printing.</li><li>Print with around 5% infill.</li><li>Do not print to fast. (stay near 200 m/s or less)</li></ul>

Glider kit card (flies great)

固定翼

vajcnerd

Fidget Star

小玩具

Kamteix

<p>With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.</p><p>This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.</p><p><strong>Available in 256x256 to 120x120 </strong><i>(check details for 120x120)</i><strong> printing plate sizes.</strong></p><p>&nbsp;</p><p><span style="color:#E14747;"><strong><u>Assembly Guide avalaible further down</u></strong></span></p><h3><strong>Features:</strong></h3><p>The model can be displayed in either flight or landed modes.</p><p>The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.</p><ol><li><strong>Foldable Wings:</strong> Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li><strong>Landed configuration:</strong> This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li><strong>Flight configuration:</strong> For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3><strong>Recommended Printing Settings:</strong></h3><p>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:</p><ul><li><strong>First layer height :</strong> 0.2 mm</li><li><strong>Layer height :</strong> 0.08 mm</li><li><strong>Wall loops :</strong> 4</li><li><strong>Infill density :</strong> 100%</li></ul><h3>Kit options:</h3><p>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :</p><h4><strong>Standard Kit with Full-Length Wings:</strong></h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure><p>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.</p><blockquote><p>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a></p><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4><strong>Compact Kit with Short Wings:</strong></h4><p>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4><strong>Small bed Kit:</strong></h4><p>An adjusted option without wings for printers with a 180x180 printing plate.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4><strong>Separate Wing Kits:</strong></h4><p>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4><strong>Individual Components:</strong></h4><p>Every part is also available separately for those looking to print without the kit aspect or specific replacements.</p><p>&nbsp;</p><h4>120x120 printing beds</h4><p>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate</p><ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul><p>&nbsp;</p><p><i>(yes I got a bit carried away by the fun of designing the kit versions :p)</i></p><p>&nbsp;</p><h3><strong>Assembly Guide:</strong></h3><p>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure><p>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.</p>

Dune - House Atreides Ornithopter - Kit

扑翼机

SMichaud

<p>Lot of bearing.</p><p>Important print in 0.12 or lower, if you print bigger (0.16/0.2/0.24 etc..) the pieces will merge.</p><p>&nbsp;</p><p>For imperial bearing → <a target="_blank" href="https://makerworld.com/en/models/146209#profileId-159197" rel="nofollow noopener">https://makerworld.com/en/models/146209#profileId-159197</a></p><p>&nbsp;</p>

Print in place Bearing metric

轴承

rj45 dust cap

5L米桶改造轴