Just what I needed to keep small parts from going down my utility sink drain. Modified the size slightly for a good fit on my drain.

Nice clip. Tight fit on the spool and holds the filament securely.

I like the battery holder, the arms of the brackets were too tall for my caliper to come off easily. I cut their height 50% and it works well.

Printed perfectly, suits my needs.

I like the variable width, just space the brackets to fit your box.

Noce little label, I used the blank label and added color numbers so I know exactly what is on each roll.

Nice design, I made a height and width modification to suit our cabinets and spice jars we use. Found it fairly easy to modify in Bambu Studio. Thanks for the design.

Nice little box, the screw lid fits perfectly.

The threads fit a little tight, but adding teflon tape solved that. I was using this as an emergency repair on my drip irrigation system. I used PLA because that’s all I had, it couldn’t take the pressure and split. I don’t recommend using PLA for this print.

Nice simple build plate holder. Doesn’t take up much room and holds my extra plates just where I need them.