派大星

Narrenkoenig

<p>This is just a little Homebase for the Nintendo Switch. It can hold up to 8 games and has a little drawer for games or accessories.<br>Maybe there will be a version which can hold the controllers.</p><p>Unfortunality you need some support to print this, but there is no need for screws or glue.</p><p>If there are any questions, don't hesitate to ask.<br><br>I used wide tolerances, so it should be printable for everyone :)</p>

Nintendo Switch Stand / Home Base

switch

deejay

<p>Screw gauge for the most common metric screws from M2-M10 and in lengths from 2mm-120mm</p><p>&nbsp;</p><p>Schraubenlehre für die gängigsten Metrischen Schrauben von M2-M10 und in der Länge von 2mm-120mm</p><p>&nbsp;</p>

Screw measuring tool, Schraubenlehre M2- M10 - 5-120mm 

工具

1waynger1

<p>This fixture snaps onto the Bambu A1 Print Head and allows you to mount a 1" travel dial indicator. With this device you can easily indicate the 4 corners of your build plate to within .002" or .05mm. For reference I have adjusted the build plate out of parallel by as much as .050 and the Bambu A1 can still produce a perfect .2mm first layer. Please note this adjustment has nothing to do with “Level” Level is not anything of concern, what is of concern is that the build plate is as parallel as possible with the X and Y axis and this device guarantees that goal. This accepts a standard 1" dial indicator with a 3/8 stem to hold it, typically they run $15. - $25. Haas automation has a great one for $14.00 Here is a link to a video of this unit in action: </p><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=9-AvGSPGQME"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9-AvGSPGQME" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

A1 build plate tramming fixture

A1 mini

Brad - FTBT 3D

<p>I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.</p><p>You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.</p><p>Print Settings:</p><ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul><p>For best turning:</p><ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

switch

工具

A1 mini

趣