user_2588681416

ItzAsila

This is a remix of <a href="https://www.printables.com/model/306737-arduino-case" rel="nofollow">Arduino Case by 3DP</a>. I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance to 0.35mm around ports, and did some cosmetic changes. <h4>Print Settings</h4><ul><li>.3mm layer height</li><li>Infill 25%+</li></ul><h4>Assembly Hardware</h4><ul><li>4 M3 x 12mm screws for the bottom and top case </li><li>6 M3 x 16mm screws for hinges </li><li>3 M3 x 5mm screws for mounting Arduino</li></ul>Inserting the breadboard is a tight fit. For easy installation line up the breadboard so that it's parallel to the opening and apply even pressure, and you shouldn't have to trim down the nubs on the breadboard.

Arduino Uno Case w/ Breadborad Insert

Arduino

xchris

Junction Box with WAGO Inserts

electric

Thunderbee99

Rohranschluss für IBC Container mit 2&#34; Camlock Gewinde 2,3mm Steigung.Anschlussstück hat einen Ø32mm und 120mm LängeGedruckt aus PETG Wandstärke 5Linien und 50% Füllung

IBC Anschluss 2" Camlock 2,3mm Steigung

plumb/IBC

davevo

Buckle for Feedback sports service stand for bike.

Buckle_feedback_sports

Fasteners and clips and clamps

riccardorossini4

A cover designed with the IPhone 12 "boxy" design language in mind, to get your phone up to date design-wise :) From a dimensions point of view, it has rouglhy the same volume as a standard rigid-silicon cover.Edit: i added a v2 version which is slightly tighter, i suggest to try this new version firstEdit2: new cover with a great quote on the back!!:)

iphone x/xs cover

phone cases

lvh-models

<h2>Legal notice</h2>This is not my design / model. The original model by Hank can be found at <a target="_blank" href="https://www.printables.com/model/55159-large-mantis-clamp" rel="nofollow noopener">https://www.printables.com/model/55159-large-mantis-clamp</a>. I am sharing this here under the <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">CC BY-NC-SA 4.0 DEED</a> license for easy printing on bambu printers. No changes were made to the model itself, but changes were made using print profile settings (see below).&nbsp;<h2>Print profiles</h2>The model is designed with a 0.2mm clearance on the gears. I added a second print profile with a 0.1mm X-Y contour compensation to make the clearance just 0.1mm. This results in a very tight fit with almost no slop in the gears with tightening the clamp.&nbsp;&nbsp;

Big mantis clamp

tools

Jakob1508

official 3d made a greate job modeling this so i had to print it and share it here on makerworld. &nbsp;14.10.23: i have added a print plate with a testfit model in 100 and 120% try some different sizes to fit it perfectly13.10.23 sadly it does not fit my big head i will have to print it bigger to fit and then i will update a profile. &nbsp;&nbsp;&nbsp;

Iron Man Helmet + testfit file

helmet

maxgerlach2000

Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to this mod but is less filament to print and is more compact & stiffer, leading to less restriction on filament movement overall. Update (4/17/23): There is now a "short-stack" variation of the model, posted as a remix here: <a target="_blank" href="https://www.printables.com/model/455673-shortstack-the-tiny-little-bambu-ams-loading-fix-t" rel="nofollow noopener">https://www.printables.com/model/455673-shortstack-the-tiny-little-bambu-ams-loading-fix-t</a><img src="https://media.printables.com/media/prints/338542/rich_content/734d9458-5713-4b61-8d54-812587b5e426/thumbs/cover/800x600/png/screenshot-2023-04-17-193716.webp">Pros/cons versus this model listed in the link above.&nbsp;Update (4/11/23): Someone pointed out I posted the wrong STEP for the P1P version. Uploaded the right STEP file. Thanks!Update (1/26/23): Added a P1P version to address collision issues with frame on that printer. X1 users should use the original. I don't have a P1P, but a user has kindly verified that this version works for them. Note that this version might be harder to print because of lower bed surface area and you might want to go pretty slow printing it. Would suggest using a small layer height like 0.16, and/or use a nice wide brim with small brim gap.&nbsp;This remix combines what I consider to be the best of multiple solutions to this problem:<ul><li>Snap-on ease of use from the semi-official Bambu PTFE bracket<ul><li>But this bracket had routing issues that caused the tube to be either too tight or to hit the top glass.</li></ul></li><li>Superior arc/design from Mowcius's for curvature and keeping the tube angled correctly.<ul><li>But this design came in two parts that had to be shoved together, and also tended to have the part rub the top glass. It also has a thin support arm that tended to be just a little too easy to break in ABS for me, so I thickened it.</li></ul></li></ul>This design has the snap-on abilities of the Bambu PTFE bracket, with the better curvature of <a target="_blank" href="https://www.printables.com/model/309088-bambu-lab-x1-ptfe-minimum-radius-guide" rel="nofollow noopener">the Mowcius bracket</a>, and the added strength on the support arm by adding 1.5 mm thickness to it. I hope it works for you !Tons of credit to <a target="_blank" href="https://www.printables.com/social/434562-davidja92" rel="nofollow noopener">davidja92</a> who made a remix like this with a mesh-mix style. I remodeled <a target="_blank" href="https://www.printables.com/model/337720-mowcius-radius-fix-with-bambu-type-connector" rel="nofollow noopener">his approach </a>here with my own finishing touches in CAD for a cleaner model and stronger arm.Printed at 102% scale in black ABS @0.2 layer height. If you print in PETG or other plastic that shrinks less than ABS, I would suggest trying 100% scale. I'm sure it works well at smaller layer heights as well.

X1/p1p PTFE Tube Guide

Printer upgrades

Jarciis72

universal tablet holder with tilt and rotation for all sides for cars, motorcycles tractor and etc