Selyob123

lorinan

<p>This is a parametric Lithopane frame designed to work with any dimension lithopane you need.  The FDS and STEP files are included so that you can edit the dimensions as needed.  The pictures provided show color lithopanes designed using Hueforge.  Check it out if you're interested in Filament painting and Color Lithopanes.  If you need a frame for Filament Paintings instead of the Lithopanes, check out my Parametric Floating Frame.</p><p>&nbsp;</p><p>Print Directions:</p><p>Bambu Users can use the 3mf file to load the parameters.  For everyone else:</p><p>Print at .02 layer height, 25% infill, PETG is prefered due to using LED Strips, but PLA will work as well.</p><p>Mouse Ear brims are useful if you have issues with the corners lifting up.</p><p>For the Back, do a filament change at layer 3 to White to provide the best reflection for the lithopane.</p><p>&nbsp;</p><p>For the electrical:</p><p>1 USB-C Breakout Board - <a target="_blank" href="https://www.amazon.com/dp/B09KC1SMGD?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B09KC1SMGD?ref=ppx_yo2ov_dt_b_product_details&th=1</a></p><p>LED COB Strip - <a target="_blank" href="https://www.amazon.com/dp/B09Y1QYCYZ?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B09Y1QYCYZ?ref=ppx_yo2ov_dt_b_product_details&th=1</a></p><p>Stranded wire to connect the board to the strip</p><p>Soldering Iron</p><p>&nbsp;</p><p>Assembly:</p><p>Solder 2-3" wires to the Breakout Board - Positive to Vbus, Ground to GND.</p><p>Install the Breakout board on the two posts in the base.</p><p>Measure the LED Strip to desired length and install in the base, allowing ~1" clearance to Breakout board.</p><p>Solder VBUS - Positive lead to 5v pad on LED strip.</p><p>Solder GND - Ground lead to GND pad on LED strip.</p><p>&nbsp;</p><p>Apply glue/adhesive to tabs on back plate.</p><p>Install Back plate in the Base, White side facing the LEDs, making sure the USB-C port is sticking out of the slot on the bottom.</p><p>Insert Lithopane in the front, applying glue to secure if desired.</p><p>Apply glue to slotted side of Frame and install on Base, securing the Lithopane in the body.</p><p>&nbsp;</p><p>Connect power to the USB-C connector and enjoy your new photo.</p><p>&nbsp;</p><p>Hueforge can be found here:</p><p><a target="_blank" href="https://shop.thehueforge.com/collections/hueforge" rel="nofollow noopener">https://shop.thehueforge.com/collections/hueforge</a></p><p>Check it out if you want.</p>

Parametric Lithopane Frame

Flori_

<p><i>This is a remix of a model by @EmaKralova</i></p><p><i>(https://makerworld.com/en/models/224716#profileId-242637)</i><br><br>I added different size options.</p><p>The &#39;small&#39; version is the original by @EmaKralova</p><p>&nbsp;</p><p>Lengths:</p><p>Small: ca 140mm</p><p>Medium: ca 220mm</p><p>Large: ca 290mm</p><p>&nbsp;</p><p>Advice:</p><p>The &#39;large&#39; zip tie only fits on the 265mm² build plates diagonally.</p><p>&nbsp;</p><p>I recommend printing with TPU</p><p>&nbsp;</p><p>If you just want the ‘small’ version, please check out the original design (<i>https://makerworld.com/en/models/224716#profileId-242637)</i></p>

[Remix] reusable zip tie

tools

benlevi

<h2>BLV - AMS Riser Honeycomb Panels Right Left</h2><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/draft/53614/2023-09-30_f45040fceb5bb.jpg"></p><p>&nbsp;</p><p>This is an add-on to BLV - AMS Riser, these are left and right honeycomb panels</p><p>you can print and install on the sides panels of your BLV riser.</p><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/draft/53614/2023-09-30_0f580107b10fd.png"></p>

BLV - AMS Riser Honeycomb Panels Right Left

riser

waltersworld3d

<p><a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a></p><p>&nbsp;</p><p>Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you</p><p>&nbsp;</p><p>🕷️ Introducing the Ultimate Spider-Man 3D Printed Model! 🕸️</p><p>&nbsp;</p><p>Unleash the web-slinging action with our meticulously crafted 3D printed model inspired by L*GO minifigures, featuring the iconic Spider-Man in his classic red and blue costume! Standing proudly at approximately 9 inches tall, this stunning piece of art captures every intricate detail of Spidey&#39;s legendary suit.</p><p>&nbsp;</p><p>🌟 Key Features: ✅ 9 inches of Marvel awesomeness ✅ Meticulous suit details for authenticity ✅ 3D printable with Bambu Labs&#39; Automatic Material System (AMS) ✅ High-quality, durable design for long-lasting enjoyment</p><p>🖨️ Compatible with Bambu Labs Printers: The Spider-Man 3D model is designed for seamless printing on Bambu Labs printers, thanks to the Automatic Material System (AMS). Experience hassle-free printing and bring your favorite superhero to life with incredible precision and ease.</p><p>👀 Explore Our Marvel Universe: Don&#39;t stop at Spider-Man! Dive into our collection of Marvel character figures, each meticulously designed and ready for your 3D printer. Stay tuned for more iconic heroes and villains coming soon – your own Marvel Universe awaits!</p><p>🚀 Elevate Your Collection: Whether you&#39;re a superhero enthusiast, L*GO fan, or a 3D printing aficionado, our Spider-Man 3D printed model is the perfect addition to your collection. Showcase your love for the Marvel universe with this one-of-a-kind masterpiece.</p><p>🎁 Limited-Time Availability: Grab your Spider-Man 3D printed model now! Elevate your collection and swing into action with the legendary wall-crawler.</p><p>&nbsp;</p><p>🌐 Follow us on social media for updates and sneak peeks of upcoming characters!</p>

Bricks Classic Spider-Man

toys

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><figure class="media"></figure><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Thor3D

<p>Hi.</p><p>&nbsp;</p><p>I made a collection of the (for me) most important test prints i always need.</p><p>&nbsp;</p><p>It contains:<br><br>Calibration Test for Oozing/Retraction - If retratction too low: Oozing/Stringing; if too high: Bad quality of towers and printed numbers</p><p>Benchy - love it or hate it ;)</p><p>Calibration Cube - 20mm Cube for Accuracy</p><p>CaliCat - sweet Benchy Alternative :D</p><p>Hollow Pyramid</p><p>AiO Test for Overhangs, Retraction, Corners…</p><p>Squares for First Layer<br>PLA Silk Shine/Gloss Test - Different Outer Wall Speeds for different Silk gloss<br><br>The Silk Gloss Test is also good for normal outer Wall tests to find a good Sport betweed Speed and Quality…</p><p>&nbsp;</p><p>If you also have nice test prints please contact me, i'll add it…</p><p>&nbsp;</p><p>Have Fun…</p>

Calibration Prints Collection

calibrations

Barika

<p><strong>A simple rotating spice rack...</strong></p><p>&nbsp;</p><p>The following parts are needed:</p><p>&nbsp;</p><p>- 1x M8 threaded rod (Length: 232 mm)<br>- 2x M8 nut<br>- 4x washer<br>- 2x ball bearing (Diameter: 22 mm)</p><p>&nbsp;</p><p>With these components, a practical and easily rotating spice rack can be assembled.</p>

Spice rack

kitchen

KYZ Design

<p>Gridfinity baseplates completely remodelled from scratch, designed to minimise print time.</p><ul><li>Lower overall height (top trimmed)</li><li>Flares on the bottom removed</li><li>Smaller radii</li></ul><p>Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS.</p><p><br>Print <a target="_blank" href="https://makerworld.com/en/models/76537" rel="nofollow noopener">these bins</a> next!<br><img src="https://makerworld.bblmw.com/makerworld/draft/285381/2023-11-28_4d90d07fb6c75.png"></p><p>&nbsp;</p><p>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models and</p><p>check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.</p>

art

tools

riser

toys

X1C

calibrations

kitchen

gridfinity

hsw