user_2559815540

Temp

***I DID NOT MAKE THE PRINT PROFILES ON THIS PAGE, TRY AT YOUR OWN RISK***&nbsp;---v2.1---Everyone has slightly different printers and specs, so I&#39;m adding the .blend file for easier tinkering. The height of the model has been a problem for shorter printers. I use the Ender 5, one of the taller Ender machines.&nbsp;---v2.0 Is Here!---&#34;The Chopsicle&#34; v2.0 is here! Moving on from v1.0, the blades have been remade with math in mind rather then eye-balling. I have also added an additional blade to guarantee it will catch and lock. The blades now have a consistent gap of 1.25mm air between blades, so up to 80% smaller should be possible, but I haven&#39;t tested it; if anyone is brave enough to try it, let me know how it goes.&nbsp;Thanks everyone for the likes and boosts. I posted this expecting maybe 4 people to download it, and for “The Chopsicle” of all things to get so many people interested, is really funny to me. This has been a lot of fun, and thanks everyone for help finding the problems!&nbsp;The Chopsicle: Your Ultimate Telescoping SwordUnleash your inner warrior and inner fat child with &#34;The Chopsicle,&#34; the telescoping sword that bridges the gap between child-like wonder and unimaginable responsibility. Be the coolest person at the local Denny&#39;s with this bad boy!&nbsp;Features:<ul><li>Telescoping Blade: Easily extend and retract the blade for quick deployment.</li><li>Magnetic Cap: With the magnetic top, parts stay in place and don&#39;t get lost.</li><li>Double Strength Grip: The handle is designed with 3 pipes inside for rigidness and reinforcement.</li><li>It&#39;s a Chopsicle: What more do you want?</li></ul>Perfect For:<ul><li>Little Timmy on a hot summer day.</li><li>Canadians fending off polar bears.</li><li>Russians fending off Russian polar bears.</li><li>Jack Black.</li></ul>~~~𝓣𝓱𝓮 𝓒𝓱𝓸𝓹𝓼𝓲𝓬𝓵𝓮~~~&nbsp;Instructions:This print is two parts, one for the main body (v2.0 highly recommended) and one for the cap, no supports needed for either print. The full build requires six 0.6cm magnets, I got mine at a Hobby Lobby and they fit nearly perfect. All in all, it&#39;s a very straight forward assembly.&nbsp;Recommended Settings:3 walls,min 10% infill,0.2mm layer,Skirt or brimIncreased first layer for bed adhesion,Cubic infill.&nbsp;

The Chopsicle

summer

RI printing

Made for My daughter, to reminder I'm always there for her and to make good choices.

Love Dad keychain

ayva

Create with Jake

Jeep Duck Hitch Cover

jeep

Michaelwg

A easy and fun little game, the rules can be altered to your wish, but here is the set I use :)&nbsp;Up to 4 players.&nbsp;Each player gets 8 bottles.The winnier is the first one to get rid of all its bottles.The oldest player starts, turns go clockwise.If the dice shows 1-5 the player can move one of its bottles to the empty spot in the middle, if it shows 6, the player can remove one of its own bottles completely from the board. When this happens all the other players take a sip of their beer.&nbsp;You can keep throwing dices as long as you want or until you throw a number with a bottle in the spot in the middle, In that case you take the bottle to your other bottles, take a sip of your beer and the next player gets the dice.&nbsp;If a player get rid of just 1 bottle the dice can be passed if wanted.&nbsp;When the first player gets rid of all its bottles, the other players has to empty their beers, CHEERS! :)&nbsp;

Funny drinking game - Cheers!

INDY

OuijaWitch

<h2>Please take the time to read before you print, thank you.</h2>&nbsp;<h4>There are two profiles:</h4><ol><li>Hole</li><li>No Hole THE MODEL IS LAYING FACE DOWN ON ITS FACE on the build plate for you already! The textured side of the model when you take off your build plate is the front of your model. I do have this model posted on my patreon if you are interested in the commercial rights to sell. The link to my patreon is posted on my profile.</li></ol>-If you are having adhesion issues, please slow your machine down for the first several layers. -Please use glue adhesive if you are having issues with the print sticking -Message me directly if you need ABSOLUTELY any help or have any questions.

Big Foot Alien Wall Decor

Alien

joshua.makes

🚂 Simpsons Fan Alert! "I Choo Choo Choose You..." Lightbox: The Coolest Valentine's Day Gag! 🚂&nbsp;Hey Simpsons buddies and lovebirds! Got a wicked gift idea for your favorite person? Check out the "I Choo Choo Choose You..." Lightbox – a shoutout to that hilarious Ralph Wiggum moment. Perfect for Valentine's Day or whenever you wanna sprinkle some Simpsons giggles!&nbsp;Key Features:&nbsp;🚆 All Aboard the Love Train: This lightbox rocks a cute train graphic, giving major Ralph vibes. It's like a piece of Springfield right in your room – fun, quirky, and downright awesome.&nbsp;💬 Classic Quote Action: "I Choo Choo Choose You..." takes the spotlight in cheeky lettering, capturing the essence of that legendary Simpsons moment. It's not just a lightbox; it's a laughter-inducing, heartwarming piece of decor.&nbsp;🎨 Chill Vibes Illumination: With a chill, warm glow, this lightbox sets a cozy mood that's just right. Perfect for bringing a dash of Simpsons charm to any room.&nbsp;💌 Gag-Tastic Gift: Forget the standard flowers and chocolates. This lightbox is the ultimate surprise for your Simpsons-loving special someone. Imagine the laughs and love it'll bring!&nbsp;Why It's Awesome:&nbsp;✨ Blast from the Past Laughs: Take a trip down Simpsons memory lane with your favorite person. It's like Ralph Wiggum's card, but cooler and way less cardboard.&nbsp;💛 Simpsons Nerd Heaven: For the hardcore Simpsons nerd, this lightbox isn't just a gift – it's a shrine-worthy piece that'll make 'em grin every time they see it.&nbsp;🌐 Grab It While It's Hot: Snag this Valentine's Day edition "I Choo Choo Choose You..." Lightbox and let your love shine with a side of Simpsons sass.&nbsp;📥 Scoop Yours – Simpsons Style! 📥&nbsp;Ready to inject some Springfield silliness into your love life? Print the "I Choo Choo Choose You..." Lightbox now and get ready for laughs, love, and all-around Simpsons awesomeness!&nbsp;⚡ USB LED: <a target="_blank" href="https://amzn.to/3S4VnVE" rel="nofollow noopener">https://amzn.to/3S4VnVE</a>&nbsp;or&nbsp;⚡ USB LED w/ Switch: <a target="_blank" href="https://amzn.to/3RYEImp" rel="nofollow noopener">https://amzn.to/3RYEImp</a>&nbsp;or ⚡ USB LED w/ Remote: <a target="_blank" href="https://amzn.to/3vs7Uuo" rel="nofollow noopener">https://amzn.to/3vs7Uuo</a>&nbsp;*If you purchase an item through the links provided, I may receive a commission. This helps support my work and enables me to continue providing valuable content. Thank you for your support!*

Simpsons "I Choo Choo Choose You..." Valentine's Day Lightbox

Ashlety

Gunslinger_208

Simple two piece paper towel holder that I designed to fit on the lower shelf of my kitchen cupboard, 16.4mm thick. I needed to keep the clip fairly thin (3 mm) so my cupboard doors would still be able to close, so I added a modifier in the slicer to print the right angles of the clip with a higher infill density for added strength.Adjust the STEP file as needed to customize it for any shelf.

Kitchen Shelf Paper Towel Holder

Oslo

Jackmnb

<h2>2 Slot MLOK covers for your MLOK rails, MANY different designs in the ZIP folder. Uses 2x M4 MLOK screws and nuts, I found mine on Amazon. I recommend you print all my files with 100% infill.</h2>

2 Slot MLOK Covers

jarod

CYBR3D

This is a very nice set of 4 Cleveland Browns Coasters to set your favorite beverage on while rooting on the browns!&nbsp;********** NOTE**********Here is a very nice coaster caddy, top and bottom, that will hold 8 of these coasters. Print in your choice of colors, Enjoy! <a href="https://makerworld.com/en/models/195346#profileId-215902" rel="nofollow">https://makerworld.com/en/models/195346#profileId-215902</a>&nbsp;&nbsp;

Cleveland Browns Coaster Set of 4

Work Birthdays

MenLoL

This is a 3D model of a lamp shade with a honeycomb pattern. The lamp shade is designed to fit an E27 low (e27/40) bulb - the normal 60 will fit too.

lamp shade Hexagon

Lamps

All Things STL

NEW NEW!! SCREW WALL!! See videos for description… Click the link below to check it out…&nbsp;All the other files in this collection are for the Honeycomb Wall that I no longer use.&nbsp;<a target="_blank" href="https://www.printables.com/model/544779-screw-wall" rel="nofollow noopener">https://www.printables.com/model/544779-screw-wall</a>&nbsp;Some of the files require support but just the ones with the middle hex connections.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/c2PZH-eX0i0?si=g3pNL-yLpcjtgSpo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/c2PZH-eX0i0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/OImDS4lT7Kc?si=Fp0P3wua8jDUfklq"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OImDS4lT7Kc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/R5rCSqXRi7Q?si=FggY1tEdJ6Q9rlLi"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/R5rCSqXRi7Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;&nbsp;

HoneyComb Storage Wall remixes & Screw Wall

Wall Storage

dohara1985

Swiftie Earrings Layered&nbsp;Just do a color change&nbsp;Can be scaled up to be a keychain.&nbsp;<h3>Commercial license</h3>As of 2/25/24 my designs are no longer allowed to be sold commercially.&nbsp;Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at <a target="_blank" href="http://www.patreon.com/ErraticallyEccentricCreations" rel="nofollow noopener">Patreon</a> or Buy Me A <a target="_blank" href="https://www.buymeacoffee.com/dohara1985o" rel="nofollow noopener">Coffee</a>. Earring Commercial Liscence is just $3 a month. A full commercial license for all of my designs is just $7 a month.

Swiftie Earrings Layered

Harper

Eluded Studios

Introducing the Dandelion Q-Tip Holder. I wanted to create something different from the typical holder/organizer, I wanted something that the cotton swabs could be incorporated into. This one does take up a bit more space, but also serves as a display piece.&nbsp;If you do not care for the stem/base, using the head alone is an alternative option, the model will support itself on the base of the Q-Tips. You could add some colorful swabs to look like an exploding firework.&nbsp;The leaves are thin enough that you can bend them at the point of entry to the base, or such as I did with mine, you can apply heat and form them to look more natural.&nbsp;Hope you enjoy.&nbsp;If you would like to sell my models commercially, please consider joining the Patreon, I could use your support: <a target="_blank" href="https://patreon.com/EludedStudios?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink" rel="nofollow noopener">Patreon</a>&nbsp;If you wish to show your support for my work in way of donations, please buy me a coffee: <a target="_blank" href="https://www.buymeacoffee.com/eludedstudios" rel="nofollow noopener">Buy Me A Coffee</a>

Dandelion Q-Tip Holder

bathroom

FlorinV

Funny Toilet poster / sign.You don't necessarly need AMS to print this in two colors. Just change color one time at layer 6 (if you use 0.2mm layers, as in my profile).&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Funny Toilet sign

Army of Won

I'm very excited to release my Spiderverse themed toys for everyone to enjoy. This is a print in place flexi toy of the one and only Spiderman in his classic suit. This toy is designed to be printed with no supports. I've also included a multicolor .3mf file if you have access to a multicolor printer.&nbsp;This toy is offered free for personal use only, however, if you wish to sell printed versions please join our Patreon community to obtain a commercial license:&nbsp;<a target="_blank" href="https://www.patreon.com/armyofwonstudio/membership" rel="nofollow noopener">https://www.patreon.com/armyofwonstudio/membership</a>. If you enjoyed this free model please consider some of the other models in the collection including Spiderman 2099, Venom, Miles Morales and of course, the one and only Spider Gwen/Ghost Spider.&nbsp;<a target="_blank" href="https://cults3d.com/en/users/ArmyofWon/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/ArmyofWon/3d-models</a>&nbsp;Now go forth and make something EXCELLENT!

Classic Spiderman Flexi toy

Flexi

vali

It is time to play with your food! A collapsible carrot sword to protect your chocolate haul from greedy hands. Happy Easter

Collapsible Carrot Sword

Easter

amarit.may

Top glass riser for P1S

dakjones82

If you're a cat person then you get it! Add some character to your holiday decorations this year.

Kitty Cat Christmas Door Decoration

christmas

Julian Hof

Hello,i created a labyrinth box for a beer bottle. Thats the perfect litte gift. Everybody have fun to open and then to drink it :) &nbsp;

Bierflaschen Labyrinth / Beer bottles Labyrinth 

beer

Ole93

Man kann die Stängel austauschen und anordnen wie man möchte. Dadurch erhält man immer eine individuelle Tischdeko die zudem auch noch funktionell ist.&nbsp;Der Einsatz ist geteilt um ihn zum Beispiel mit Sand oder etwas anderem schweren zu füllen.&nbsp;Als Magnete habe ich 12x3 genutzt:https://www.amazon.de/dp/B0CHNWDQBL?ref=ppx_yo2ov_dt_b_product_details&amp;th=1