Sven

TH Designs

This is a book stand that can be used to hold your cookbooks, textbooks, iPads, and anything else you want to put in it. This model is printed in two pieces, which can easily be clipped together to create the stand, making it lightweight and portable. You can print this with no supports and I recommend at least 20% for strength.

Book Stand / Holder. 

utils

HribaDesign

I searched and printed a lot of different models, but each one had minor or major flaws, so I decided to tweak my own.<h4>Print instructions</h4>Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the endsI printed on Voron2.4R in the settings for voron parts (I know, in the photos I have the first layer a little high.).

Lego train - Straight track rail

lego

Rott3D

Easy to print in place rigger, customizable distance by tube

Fishing rigger

fishing

LAYERED

<blockquote>Susan Kare is an American artist and graphic designer, who contributed interface elements and typefaces for the first Apple Macintosh personal computer from 1983 to 1986. She was employee #10 and Creative Director at NeXT, the company formed by Steve Jobs after he left Apple in 1985. &nbsp;– Wikipedia</blockquote>Well, as a tribute to all these great graphical elements I made a set of plates with the most favorite ones. Just put them down with the included base, frame them all together or individually and hang them on the wall or use them as refrigerator magnets.&nbsp;To get the pixels clean and sharp, I recommend to print everything with a 0.2mm Nozzle. A 0.4mm nozzle will also work, but it will be better with the 0.2mm. The print time with the finer nozzle is about twice as high as with the larger ones.&nbsp;Color it as you want and print it upside down, if possible on a structured PEI plate. This guaranties a smooth surface.&nbsp;The current set of plates is designed so that you can stand them up with the base. If anyone needs cutouts for small magnets on the back, please let me know. I will gladly fulfill your wishes. Also if you want a specific icon to go with it, please contact me.&nbsp;Actual these icon plates are available:<ul><li>Alert</li><li>Bomb</li><li>Command</li><li>Fill</li><li>Floppy Disk</li><li>Happy Mac</li><li>Mac Classic</li><li>MacPaint</li><li>Moof the Dogcow</li><li>Sad Mac</li><li>Spray Paint</li><li>Trashcan</li></ul>

Apple Macintosh Icon Plates

with ams

Onkelsam

made a few printprofil changes too improve stability (02/28/2024)&nbsp;Wall panels in different sizes, all can be connected to each other in a 38mm grid.&nbsp;Print bed surface determines the surface of the finished panel.&nbsp;Panels cannot be combined with the Octo version

Wallflex Rechteck Werkzeugwand versch. Größen

Wallflex

jr2142

Remix of the Thailand Buddha from stronghero cutting of the uneven part of the base.

utils

lego

fishing

with ams

Wallflex

print_next