David

iczfirz

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost me, post your make and  send me a message for additional slide.</boostcontent></boostme>Subcompact prop pistol extended mag upgrade for <a target="_blank" href="https://makerworld.com/en/models/504858" rel="nofollow noopener">Subcompact prop pistol detachable slide &amp; barrel</a> (https://makerworld.com/en/models/504858)&nbsp;<figure class="image"><a href="https://youtu.be/ug2HAZCRrTI" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517535/design/2024-06-29_05a079e6c7ee7.png" width="1422" height="802"></a></figure>Build video link <a target="_blank" href="https://youtu.be/ug2HAZCRrTI" rel="nofollow noopener">https://youtu.be/ug2HAZCRrTI</a>&nbsp;<figure class="image"><a href="https://youtu.be/xeLvqoVZ0zE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000517535/design/2024-06-29_f78327aa63846.png" width="1294" height="728"></a></figure>Suppressor video link <a target="_blank" href="https://youtu.be/xeLvqoVZ0zE" rel="nofollow noopener">https://youtu.be/xeLvqoVZ0zE</a>&nbsp;Please note that I may use the photo you create as a model cover. Welcome to publish your work.

Subcompact prop pistol extended mag upgrade.

Weapons

The3DPrintTeam

ODST Helmet Very High Quality with Visor Buck

Halo 

davescarpitti

Think of this as an expansion pack/DLC for Martin Taichl's amazing model of the Raptor Class Light Cruiser: Ares. It includes an electronics box to hide most of the wire connections for the LED lights, a flame cone for exhaust, a lock and key holder for the LED that mounts in the engine cone. It also includes a modified stand that will work with any table. The original was designed to fit in a custom mount. Please note: This only works for the 100% size model not the 50% painted version on the model page. The electronics used are from <a target="_blank" href="https://evandesigns.com/" rel="nofollow noopener">https://evandesigns.com/</a> and are as follows: Regulated 3 volt power supply x 1 Flickering Miniature LED, Ice Blue, Size Mega (this is important I designed the mount to perfectly fit this). Shrink Tube

Accessory Pack for Expanse Raptor Class Light Cruiser by Martin Taichl

The Expanse

xallex digital design

Fallout Fusion Core / Stash Container Desk / Ornament Replica / Cosplay Accessory Multi-part locking stash container / Desk Ornament Replica of the Fusion Core from the popular game Fallout  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430340/design/2024-04-17_82adf2aefef13.png"></figure> Screws: x4 M2 x 4mm Stainless Steel Hex Socket Head Cap Screws (Attach bottom) – (<a target="_blank" href="https://amzn.to/3Wgm5Ou" rel="nofollow noopener">https://amzn.to/3Wgm5Ou</a> or <a target="_blank" href="https://amzn.to/49TxXta" rel="nofollow noopener">https://amzn.to/49TxXta</a>) x1 Black M3 x 6mm (Attach knob) – (<a target="_blank" href="https://amzn.to/4aP4hPd" rel="nofollow noopener">https://amzn.to/4aP4hPd</a>) Material: Yellow - Hatchbox PLA <a target="_blank" href="https://amzn.to/3U9sl8c" rel="nofollow noopener">(https://amzn.to/3U9sl8c</a>) Red - Hatchbox PLA (<a target="_blank" href="https://amzn.to/4b52FRa" rel="nofollow noopener">https://amzn.to/4b52FRa</a>) Black - IIIDMAX PLA+ (<a target="_blank" href="https://amzn.to/3wcbjhK" rel="nofollow noopener">https://amzn.to/3wcbjhK</a>)  Glow - Duramic 3D PLA (<a target="_blank" href="https://amzn.to/3xUMPdl" rel="nofollow noopener">https://amzn.to/3xUMPdl</a>)

Fallout Fusion Core Stash Container Desk Replica

Fallout

mcgybeer

The original Articulated Shark is finally on MakerWorld!&nbsp;XY compensations have been tuned because Bambulab printers are way too precise 😂 (and this model was designed back in 2019). Note that the upper teeth rely on the bottom ones to be printed, that&#39;s why a well-calibrated gap is so important. If it fails or it is too hard to open the jaw feel free to adjust the XY compensations yourself. I&#39;ve provided a head so you can test the settings without wasting too much material.&nbsp;4 Versions available:<ul><li>Shark A: Original design, movable jaw</li><li>Shark B: Friendly face, movable jaw</li><li>Shark C: Original design, NON-movable jaw</li><li>Shark D: Friendly face, NON-movable jaw</li></ul>After printing, the tail and the jaw should get free with a little force (a small knife may help you for the teeth): <a target="_blank" href="https://youtu.be/14z1ll9yMmU" rel="nofollow noopener">https://youtu.be/14z1ll9yMmU</a>Then just enjoy it, even in the water!! <a target="_blank" href="https://youtu.be/E1W-RyH8bGA" rel="nofollow noopener">https://youtu.be/E1W-RyH8bGA</a> <a target="_blank" href="https://youtu.be/aV-XhMr7Edc" rel="nofollow noopener">https://youtu.be/aV-XhMr7Edc</a>&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>

Articulated Shark

Animals

LetsModEverything

This is designed for 120mm fans and will bolt directly onto your fan without having significant impact on performance. Based off the noble team logo from halo reach, this fan shroud prints quick and easy, and can easily support AMS if multi color is desired.

Halo Noble Team Inspired Computer Fan Cover/Shroud

To print

vajcnerd

Aliens APC M577 from the film Aliens 1986, the model is glued, more content and instructions will be added gradually. The cannons are rotating and retractable, the wheels are spinning.

Aliens Colonial Marines M577 APC

Xeno

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_z5vr7b952er7.png"></figure><h4>Dimensions (LxWxH)</h4>186,9 x 66,7 x 33,8 mm (100% scale)<h4>Basic information</h4>The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. It prints in place, no assembly is required.<h4>Files information</h4>I've included one file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_i094q5laoxlp.png"></figure><h4>Material</h4> PLA<h4>Layer height</h4> ≤0,2 mmor>0,2 mm + variable layer height<h4>Infill</h4>>15%<h4>Support</h4>None. The model was designed not to require any support material.<h4>Scaling</h4>Possible, however, If your machine isn't calibrated properly, has accuracy problems, or if you're dealing with filament issues, downscaling isn't recommended. When downscaling, proceed cautiously, and don't go too small, unless you want to risk mobility related issues. When printing a downscaled version, adjust layer height in proportion to the scale.But be careful, if you're printing a downscaled version, the tail fin is fairly narrow, and it's sticking out quite a lot, so it might not have enough time to cool down while printing. To eliminate this issue, print at least two instances of the model, or add a simple tower with the same height as the model. This will force the nozzle to move away from the fin, and allow it to cool down properly.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.<h4>Other settings/ideas</h4>To make the model look even cooler, add a filament change into your gcode, and print the belly in a different color.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_cfuh5ahi4zg5.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not. If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_z8v0e93k1c8u.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/591424/2024-01-09_k573xpbbcobz.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Whale Shark

Flexi

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Pokemon

im.jackharvest

To see more video game themed items I've made, <a target="_blank" href="https://makerworld.com/en/u/491970848/collections/461438" rel="nofollow noopener">check out my collection</a>.-----------------------------------&nbsp;Hyrule Castle is in good hands. Link? Who's that?&nbsp;<figure class="image image_resized" style="width:40.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/641872/2024-03-05_49d14823c5a1.jpg"></figure><figure class="image image_resized" style="width:40.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/641872/2024-03-05_42a7972f4c2098.jpg"></figure><figure class="image image_resized" style="width:39.7%;"><img src="https://makerworld.bblmw.com/makerworld/draft/641872/2024-03-05_427cbedf0bc7d8.jpg"><figcaption>Can you believe something so silly looking from an angle is so cool from head-on?</figcaption></figure>&nbsp;Please. Enjoy! Show me your makes! :D&nbsp;