user_2391893831

Mc2.project3D

<h2>ARK MK1 REACTOR by Tony StarkThis is the Iron Man heart for LED Lamp kit-001.</h2>Simple to print, no supports. (to be printed at 0.2mm layers and in Pla material)<h3>--V2 REVIEW COMPLETED--</h3>These components have been revised:  The instructions you will find below do not change with revision 2&nbsp;ASTA CORTA: clip fit<img class="image_resized" style="width: 14.82%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_a96f1bbc70d2c.png"><img class="image_resized" style="width: 13.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_3009800e2c211.png">ASTA LUNGA: clip fit<img class="image_resized" style="width: 14.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_006039051b68a.png"><img class="image_resized" style="width: 13.63%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_1b8899013f068.png"> BOBINA: improved offset<img class="image_resized" style="width: 16.18%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_108063b83c315.png"><img class="image_resized" style="width: 14.46%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_165ee8ce81163.png">&nbsp;PIASTRA DISCHI: improved offset <img class="image_resized" style="width: 19.35%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_5f0baefc76fdd.png"><img class="image_resized" style="width: 17.04%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_4b6898843d7a4.png">   SCALE ANELLI:  -change space for more snug &#34;Anelli&#34;. -modified offset for “Corona superiore” -modified offset for fixing &#34;Scale on &#34;Piastra Dischi&#34; <img class="image_resized" style="width: 17.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_a44568a420222.png"><img class="image_resized" style="width: 17.15%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-12_e5f4a6b3c263f.png"> CORONA SUPERIORE: -larger diameter      <img class="image_resized" style="width: 18.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_a1ce9c9a9a703.png"> <img class="image_resized" style="width: 20.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e73256a95a72c.png"> PONTE ANELLO SUP: -larger diameter -more editing<img class="image_resized" style="width: 21.9%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e779d93ae45ab.png"><img class="image_resized" style="width: 24.41%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_f5bc5bfce6fa4.png"> VITE: -larger diameter<img class="image_resized" style="width: 23.13%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_e531b455aa69.png"><img class="image_resized" style="width: 20.79%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-14_54cce897bb6a9.png">&nbsp;EXLOSED FUSION 360:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_d0ad36003ab58.png"></figure>LINK assembly: (follow the Gifs at the bottom of the page)https://www.instagram.com/reel/C7HQLcwtCva/?igsh=aWJxbnk3aHpocnJ4&nbsp;COLORS USED:-Black-White-Silver (grey)-Gold-Copper-Transparent&nbsp;Different colors can also be used.&nbsp;<figure class="image image_resized" style="width: 65.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_dfbd2dcda0747.jpg"></figure>&nbsp;COLORAND QUANTITYComponents to print with Black color:-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)-ANELLO ASTE-CLIP (20 pezzi)-ANELLO BUCATO-CORONA SUPERIORE-PONTE ANELLO SUP&nbsp;Components to print with White color:-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)&nbsp;Components to print with Grey color:-ANELLO SUPERIORE-VITE (x 3 pezzi)&nbsp;Components to print with Copper color or Gold color:-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4-BOBINA (x 10 pezzi) Components to print with Transparent or White color:-CORDONE (x 10 pezzi)&nbsp;ASSEMBLY STEP TO STEP:STEP 1-BASE-ASTA CORTA (x 10 pezzi)-ASTA LUNGA (x 10 pezzi)<figure class="image image_resized" style="width: 55.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_9ac29e20e0b1e.gif"></figure>&nbsp;STEP 2-LED LAMP KIT-001<figure class="image image_resized" style="width: 55.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_c2adad2b7a86c.gif"></figure>&nbsp;STEP 3-ANELLO CENTRALE-PIASTRA DISCHI-SCALE ANELLI (x 3 pezzi)-ANELLO BUCATO<figure class="image image_resized" style="width: 54.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_098ff17d18285.gif"></figure>&nbsp;STEP 4-ANELLETTO 1-ANELLETTO 2-ANELLETTO 3-ANELLETTO 4<figure class="image image_resized" style="width: 55.05%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_3c5e3c122d75a.gif"></figure> STEP 5-ASSIEMAGGIO STEP 1 E STEP 4-ANELLO ASTE<figure class="image image_resized" style="width: 54.31%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_d530ed8b5197a.gif"></figure>&nbsp;STEP 6-CLIP (20 pezzi)-CORDONE (10 pezzi)-BOBINA (x 10 pezzi)<figure class="image image_resized" style="width: 53.42%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_96dd67f61a1bb.gif"></figure>&nbsp;STEP 7-ASSIEMAGGIO STEP 5 E STEP 6-CORONA SUPERIORE<figure class="image image_resized" style="width: 52.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_959c30a0e78b4.gif"></figure>&nbsp;STEP 8 (FINE)-ANELLO SUPERIORE-VITE (x 3 pezzi)<figure class="image image_resized" style="width: 50.83%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-18_1ebd86754979c.gif"></figure>&nbsp;<h2 style="text-align: center">BASE REATTORE ARC MK1</h2><figure class="image image_resized" style="width: 65.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_ed19e7b5a87ce.jpg"></figure> REACTOR BASE COMPONENTS:-PIATTAFORMA-RIDUZIONE-TUBO BASE-BIG VITE-DISCO SCRITTE-SCRITTE&nbsp;COLORS USED:-Grey-Black&nbsp;ASSEMBLY STEP TO STEP:STEP 1 (CLUTCH ASSEMBLY)-DISCO CON SCRITTE-RIDUZIONE<figure class="image image_resized" style="width: 50.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_3515a4fd55e3e.gif"></figure>&nbsp;STEP 2 (SCREWED MORE INSTALLATION)-PIATTAFORMA-BIG VITE-TUBO BASE<figure class="image image_resized" style="width: 49.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-05-26_23c1d603412a6.gif"></figure>&nbsp;STEP 3<figure class="image image_resized" style="width: 62.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467861/design/2024-06-02_5b40963220172.gif"></figure>  If you want to put up with my work and help me design more: https://www.paypal.me/carmelomontalto88&nbsp;This project gave me a lot of satisfaction. Available for any questions.Good Print from MC2 PROJECT 3D

Reattore Arc MK1 (LED Lamp Kit-001)

灯具

UniversalMaker

A simple clip for your glasses. Build mostly for sun glasses. Should fit most cars.&nbsp;<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/853965/2024-04-14_1ee1ac588a7c6.webp"></figure>I have also designed a practical seat mounted hook in the same style: <a target="_blank" href="https://makerworld.com/en/models/420776#profileId-323486" rel="nofollow noopener">https://makerworld.com/en/models/420776#profileId-323486</a> &nbsp;<blockquote>Disclaimer: These 3D printing files are provided “as is” for informational purposes. We make no warranties, and their use is at your own risk. Always exercise caution and consult professionals when needed. 🛠️🔍</blockquote>&nbsp;

Car Glasses Clip

车上用品

make 3D

The Perpetual Calendar&nbsp;A fully 3D printed calendar. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.  If you don't have an AMS unit, you can just print the date/month tiles in one color - Then you use a Posca Marker or similar to add the date and months.&nbsp;I seperated each color print (besides the date/months tiles) to individual print plates. Please move these around as you please for faster or more eficient prints.&nbsp;NB: When assembling the calendar please only tighten the axis so you can still move the date and month individually.&nbsp;The indicator tiles needs to be inserted in this order.<figure class="image image_resized" style="width:56.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/467143/2023-12-30_2ce15f6f96ba7.png"></figure>NOTE: The two housings are not the same.The centerblock one for the days is 31,4mm - The centerblock for the months is 28,8mm&nbsp;If you’re having issues with adhesion in general with your printer - please use the print profile with added brim to the threaded axis. &nbsp;Please have a look at this assembly video I've made. If you follow these steps it's a very simple assembly.<figure class="media"><div data-oembed-url="https://youtu.be/XVZG9G0sLQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/XVZG9G0sLQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This video shows how to orient the date tiles so the calendar works as intended.<figure class="media"><div data-oembed-url="https://youtu.be/AJB0iBZT9bc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AJB0iBZT9bc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Please make sure you print bed is clean when printing the multicolor parts to ensure maximum adhesion.&nbsp;Due to the nature of 3D printed parts being very light, you might encounter that the tiles won't fall down immediately. If this happens just give the housing a little tap and it should fall into place.&nbsp;My calendar is printed with these filaments:Sunlu PLA+ White (I am having bed adhesion issues with this filament - I recommend Bambu PLA White instead)Sunlu PLA+ BlackBambu Lab PLA Basic Orange UPDATE 31-12-2023:Uploaded a new print profile. Version V1.1Made a few modifications to the two housings so the tiles would fall down more consistently.This update also reduces the print time by more than 1 hour.&nbsp; UPDATE 08-01-2024:Some users have been complaining/leaving low ratings about the ironing of the tiles or bed adhesion.  Please modify this yourself within Bambu Studio if your printer is not well calibrated or maintained.  Also, make sure your printer bed is clean from any grease.  I've had zero issues with my own prints. both ironing and bed adhesion.  Printed on a P1S.&nbsp;&nbsp;

"Date Keeper" Perpetual Flip Calendar (Fully 3D printed)

日历

Mick23

Hi, here a little model of a Benchy.It print Flat with nos supports, If the slicer says it need supports, Ignore that it need supports.&nbsp;When its printed, draw imaginaire dot lines on the benchy paint.Its between these right dotlines you need to heat with a lighter underneath, back and forth until the temperature is just above 65 degrees.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_84c0142564525.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_2c74131012b53.jpg">&nbsp;Now you can fold it over and push on it to a corner of a table or shelf.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_bad51dff6a066.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_e8499a47f1d43.jpg">&nbsp;When it is cool down, you can heat between the other imaginary dot lines.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_67767c001d3d4.jpg">&nbsp;And repeat the previous steps&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_63166aad2147b.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_afd3c56859e46.jpg">&nbsp;If you have any problem , let me know&nbsp;Look also my cube paint https://makerworld.com/nl/models/55104#profileId-56614&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-11-01_8492330af006.jpg">And please if you like it , share it and print it!!!! And show me your pictures. and rate the print profile please Like it if you want and follow me for other items. Comments welcome&nbsp;I added also a print profile in mirror mode if you want

Benchy paint No support

装饰

安装所需1：4颗螺纹长度为10MM的M3螺丝，4颗M3螺母2: 需要在X1CC或者P1SC寻找多余螺丝替换ams lite的原本的螺丝才能安装。特别提醒：A1mini不能独立完成这个打印任务。安装视频可以在B站寻找（嘟吉）进行观看。&nbsp;&nbsp;

A1mini ams lite FILAMENT DRY BOX

SK07 Skipper07

Here is a new variant of the Christmas mug, this model can act as a lamp with the installation of a small LED light inside and give an extra magical touch to your Christmas.I hope you enjoy it and I take this opportunity to wish you all a Merry Christmas

Christmas Mug 2.5

厨房用具

agepbiz

<figure class="media"><div data-oembed-url="https://youtu.be/Ul6tzKezKa0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Ul6tzKezKa0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Pull Copter Finger Ring Assembled using M2x8 Hex Cap screws.<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;<h3>Print instructions</h3>0,2mm 30mm/s Support on the ring (I used support only from base)

Pull Copter Finger Ring

玩具

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

手机支架

Adam L

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove my design is original from scratch and not a “remix” of that model. It is only a remix of my OWN model. I do respect licenses of others. Note to everyone else: Now includes Fusion360 Model (because reasons.. ) !&nbsp;Some people suggested that they would prefer to use a toothbrush or brass bristle brush to clean their threads instead of the parent <a href="https://www.printables.com/model/476890-super-screw-scrubber-a-sensational-solution-for-sp/remixes" rel="nofollow">Super Screw Scrubber </a>design with paper towel. For them, I've designed this alternative version of the scrubber that lets you slap on a cut-off toothbrush or brass bristle brush or similar and glue it onto the guide. This simple but effective modification lets you get a deeper clean with a longer reach!This version is the more reliable tapered version from the parent that should reduce any first layer print issues. Since the brush bristles are the key to cleaning in this version, the exact tightness of the threads is less important.<h4>Versions</h4><ul><li>DefaultSize (Recommended)</li><li>ShortBrush - if you have a brush that's not quite long enough to comfortably reach, this offers a closer spacing of the flat part to the lead screw by ~ 4 mm. </li></ul>&nbsp;<h3>Print Instructions (same as parent)</h3><ul><li>Print at high layer resolution, I recommend 0.1 or 0.08 if possible on your printer, so that the threads fit nicely. There are slight tolerances built into the thread design so that it should clamp nicely.</li><li>Most filaments should be fine.. but I would avoid anything like carbon fiber or glow in the dark filament to avoid any scratching of the screws (though most are made of steel that probably would not scratch anyways).</li><li>Orient the flat side down. I designed the part slightly asymmetrically so this is intentionally hard to screw up when placing on your bed :).</li></ul><h3>Use instructions </h3><ul><li>Find an old toothbrush or brass bristle brush, cut off the head. Use hot glue (recommended) or some other suitable glue to attach the head to the flat section as shown in the pictures.</li><li>Attach the clamp and brush to your lead screws as shown.. run the bed up and down (make the screws rotate), and hold the clamp in place as you do so.</li><li>Remove the widget, and clean the gunk off (can just rinse with IPA and/or acetone for most greases).</li><li>Re-grease your threads if you stripped all the grease off.</li></ul>&nbsp;<ul><li>Don't use as a regular toothbrush anymore, the ADA has informed me this is not an approved dental product after this modification :). <img src="https://media.printables.com/media/prints/477870/rich_content/50fb1bab-9bd4-4c1c-b9c8-59d26d9d371c/image.png#%7B%22uuid%22%3A%222da5821e-19c2-4860-832f-116d5b83b985%22%2C%22w%22%3A652%2C%22h%22%3A600%7D"></li></ul>&nbsp;3MF & STEP file included!

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

工具

Marc Elbichon

🗃️🗄️📌🔩 Give a look to the entire <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/69080" rel="nofollow noopener">Ultimate Drawer System collection</a> to discover many drawer layouts and accessories!&nbsp;Features :<ul><li>Shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf,</li><li>Shelves are stackable horizontally and vertically for an easy scale up, you can attach them together with M4x8mm csk screws and M4 nuts, side to side or bottom to top</li><li>Shelves are wall mountable, each one have 4x 5mm holes at the back</li><li>Shelves are available from 2 to 15 drawers high</li><li>Each drawers are available from 1U to 6U height. However, there is a limit in number of files per post, so you&#39;ll find <a target="_blank" href="https://makerworld.com/en/models/433070#profileId-337701" rel="nofollow noopener">4U to 6U on this one</a></li></ul>&nbsp;

灯具

车上用品

日历

装饰

a1

厨房用具

玩具

手机支架

工具

收纳