Deku_Mania

Sevro

Pendant in shape of stylized Manta Ray.For best quality use as low layer height as possible, in print profile I used 0.08 mmScale as you want

Manta Ray Pendant

fashion

ThreeD-Michael

This giant gyro fidget spinner is extremely satisfying and a pleasure to hold in your hand. Thanks to the octagonal external shape, it can stand independently and therefore also serves as a beautiful decorative object.&nbsp;The fidget is printed in one piece, no assembly required.I recommend to use one of my print profiles.

Giant Gyro Fidget Spinner

fidgets

axtrinocreations

Update III 11-19-22: Added a remaining filament measurement marks. These .2kg marks match the positions that Bambu Lab has on their spools. Even so, these are estimates at best.Added to the following STLs: Bambu Lab Reusable Spool Remix Four-Short-V6.stl Bambu Lab Reusable Spool Remix Four-Tall-V6.stl Bambu Lab Reusable Spool Hex Snowflake Tall - label v2.st Do not use ‘adaptive layer height’ as that will flatten these marks and numbers out. UPDATE II 10-24-22: Corrected Tall Snowflake side to have proper pattern alignment with short side (cosmetic correction). Provided two versions of the Tall Snowflake half. One with label space, one without. UPDATE II 9-30-22: Added lightweight ‘Snowflake’ version of the Spool! UPDATE 9-30-22: Corrected missing alignment tab on tall half of the spool. Cleaned up other minor imperfections on both halves. Set the spool diameter to 200mm to match that of the Bambu Lab versions. Added the bambulab_spool_spacing_shim.stl (print two). Current is V5. UPDATE 9-27-22: Based upon feedback I have decreased the diameter of the center spindles to match those of other Bambu Lab reusable spools. UPDATE 9-14-22: I have repaired the short side to be a more manageable size (was 9MB).I have combined the best features (in my opinion) of the three previous remixes.I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool Holder” (everything except the heavier hex pattern), both of which were remixed from “Bambu Lab Reusable Spool Holder Hex Remix”.I added an additional label space on the other spool half. I like to have both sides labeled, (trust me it saves time). I also tilted the 6 pairs of holes all around the rim at 45deg to make it easier to secure the loose filament end (and not crimp it so you end up trimming it off later).

bambu lab reusable spool

spool stuff

Stamatis Sarlis

A spacious desk organizer for your office.Note if you have bed adhesion issues please add a brim to the print profile.Note 2: You can adjust how tight will the parts by slighting unscrew the cylinder<ul><li>Print all plates</li><li>Screw the cylinder on the base</li><li>Put the two storage layers on top of the base through the cylinder</li><li>Press fit the top part on the cylinder</li><li>Ready!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/410594/2024-01-16_4b509fcf8d888.gif"></figure>

Rotating spacious Desktop Organizer

organizers

Wcad00

Update december 1st<ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul>&nbsp;&nbsp;This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..all pieces printed perfectly and require no sanding.Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeousAlso it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.&nbsp;Also photos are available athttps://s.go.ro/vs3zltii | password: 230926there are over 60 so i couldnt upload them here.Next few days i will upload better quality photos of the entire plane&nbsp;I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .

fashion

fidgets

spool stuff

organizers

projects