user_2364956598

BC Designs

My AMS Hub was getting noisy, caused by filament grating on 2 of the input paths. I've been wanting to test replacing this with the A1 hub, but it has been out of stock in the UK for over a month. So I made one, with a mount.&nbsp;I wanted to keep the 4 way splitter compact but from testing longer internal filament paths worked much better/smoother. I've been using this now for over 2 weeks with zero issues.&nbsp;Requires 5 x PC4 M10 pneumatic connectors. Make sure the PTFE tubing goes fully through your fittings as it needs to be fully pushed into the internal channel.&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/739871/2023-11-12_012a2fe6509e7.png">&nbsp;&nbsp;PrintingIncluded 3mf file prints the 4 way splitter with a brim @ 0.12 and the filament buffer mount @ 0.20.If you are printing the STL files take a look at the included 3mf file first, and the support blocker, if not careful you will have supports in the filament path.&nbsp;&nbsp;FittingRemove the supports fom the output side that was printed face down. Push some filament through from the input side to ensure path clear.Remove the original filament buffer and re-mount on top of the printed mount, using the same screws.Screw in the PC4-10 fittings into the 4 way splitterCut a smaller piece of PTFE and insert in the output side, and slide the splitter into the mount as shown in the picture.Insert your AMS x (up to 4) PTFE tubing into the splitter, be sure to push all the way in&nbsp;&nbsp;

AMS Hub using filament buffer / 4 way splitter

Spool

AP Engineering

Keep your electronics cooler and your print chamber hotter!&nbsp;For everyone wanting to print more technical materials (or just wanting to extend the longevity of the printer) you will want to have your chamber hot but that comes with the price that you will heat up part of your electronics. Unfortunately these printers don't really separate the electronics from the print chamber air, meaning that when when your chamber is hot, your electronics will be hot.&nbsp;I remixed these designs for better fitment. This will block all the ventilations and/or blank space, between printing volume air and the electronics air. Just print it in PETG, ABS, ASA, and stick it in place using double sided tape. I advise to use this part in conjunction with my other parts to separate the air and keep the electronics cool: Interior Poop Chute Cover/Seal - <a target="_blank" href="https://makerworld.com/en/models/14051#profileId-14100" rel="nofollow noopener">https://makerworld.com/en/models/14051</a> Top Electronics Ventilation Seal - <a target="_blank" href="https://makerworld.com/en/models/165352" rel="nofollow noopener">https://makerworld.com/en/models/165352</a>Back Electronics Seal (Filter Side) - <a target="_blank" href="https://makerworld.com/en/models/165342" rel="nofollow noopener">https://makerworld.com/en/models/165342</a>Back Electronics Seal (Electronics Side) - <a target="_blank" href="https://makerworld.com/en/models/165338" rel="nofollow noopener">https://makerworld.com/en/models/165338</a>Top Filter Ventilation Seal - <a target="_blank" href="https://makerworld.com/en/models/165331" rel="nofollow noopener">https://makerworld.com/en/models/165331</a>&nbsp;__________________________________________________________________________________________________________________________________&nbsp;Improvement over the original design: Added a 0.2mm embossed logo of Bambu to make it look more customizeable!&nbsp;Special thanks to the original designer MandicReally for his really amazing work designing these! Check his Youtube videos, it has a lot of usefull information!

BambuLab X1C/P1P/P1S/X1 - Electronics Seal - Keep Electronics Cool and Chamber Hot!

Bambu stuff

Martin_au

Hard to get this guard these days. Works as per the original. This one is printed in PLA as it's a prototype, but I'd recommend printing it in somthing more robust. When/if this breaks I'll print it again in Nylon/CF. Includes integrated supports. Just pop them off before installation.

Makita BUR141, DUR141, BUR181, DUR181 replacement trimmer guard.

Makita

T_WITHE

Welcome! I am pleased to share with you the Gardena quick connector set that I designed in various sizes to perfectly meet different connection needs. The set is available with different threads and sizes:<ul><li>External and internal threads</li><li>Sizes: 3/8&#34;, 1/2&#34;, 3/4&#34;, 1&#34; (M18)</li><li>Traditional BSP thread</li></ul>Material Choice For the best results and long lifespan, I recommend the following materials for printing: PETG, ASA, ABS. PLA can also be used, but I strongly recommend the former materials. Sealing Rings Sealing rings can be printed from TPU material as it is flexible and waterproof. However, for the best results, I recommend using factory sealing rings, especially O-rings, to ensure maximum water tightness and long-term reliability.It&#39;s important to note that high pressure can cause leakage or other issues, so I do not recommend using the connector at high pressure! I experienced slight leakage at 6 bar, so please don&#39;t leave negative feedback because of this. Thank you! For supports, if possible, use support material, or use PETG-PLA or PLA-PETG interface layer mode. Thank you for choosing this 3D printable Gardena quick connector set! I hope you find it useful. If you have any questions, feel free to reach out to me! If you have any suggestions or requests, please contact me. This is a revised version of my original model with some additional sizes: <a target="_blank" href="https://www.thingiverse.com/thing:4904221" rel="nofollow noopener">https://www.thingiverse.com/thing:4904221</a>

Gardena quick connector set

Gardena 

3Deekes

Another “Art Deco” Hueforge : this time another childhood favourite of mine : Gizmo ! The cute mogwai from Gremlins.Just make sure you don&#39;t feed him after midnight! :)&nbsp;The dimensions are 180x180 mm so it fits nicely in a square frame.&nbsp;You can print frames that are compatible with my “Art Deco” Hueforges via this link :&nbsp;<a target="_blank" href="https://makerworld.com/en/models/194571" rel="nofollow noopener">https://makerworld.com/en/models/194571</a>&nbsp;Colors Used :&nbsp;Black → Brown → White&nbsp;&nbsp;I changed the thickness of the base layer, now it&#39;s 1 mm, this creates a much stronger/durable end result.I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.&nbsp;I also removed the Prime Tower , it isn&#39;t really needed for Hueforges&nbsp;Swap Instructions (when all layers are 0.04) Start with Black At layer #33 (1.32mm) swap to Dark Brown At layer #37 (1.48mm) swap to White for the rest. &nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on : <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Art Deco - Gizmo from Gremlins

Hueforge

Meister Edel

Update 10.02.2023:I remixed the rotor with the toroidal design :) Feel free to test ist out!<a target="_blank" href="https://makerworld.com/de/models/54749#profileId-56494" rel="nofollow noopener">https://makerworld.com/de/models/54749#profileId-56494</a>In addition, there are now many other great remixed propellers from other users. You can find them connected to this print or my toroidal propeller.<figure class="image image_resized image-style-align-center" style="width:65.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2d7kbimuo75c.jpg"></figure>&nbsp;HiRecently my son came home very sad because a friend had such a fancy flying propeller from the 1€ shop.Of course I had to sit down directly at the computer and after the first prototype was already well working I designed an improved version.This toy should be very stable and last a long time! Also, it's very easy to use and grab for the smaller ones among us!Put the pulling rod in the place marked by the arrows. Otherwise the propeller wants to fly downwards. Have fun! :) Note: The prop will fly long distances/ very high. So better use it in a place without trees and no obstacles. Hold the Toy away from the face! - otherwise the propeller will fly into it :D&nbsp;Print instructions/ tipps:<ul><li>Axis: Print the axis with at least 3-4 perimeters!</li><li>Propeller: Print the propeller with a not too brittle material! (I used tough PLA or even better: Nylon + Carbon Filament) - Low infill: The lighter the better ,-) I also tried TPU. It works but if you pull too hard it may deform too much and cause a malfunction. The lower you choose the layer hight the less friction the prop will cause. (I printed in 0,15mm)</li><li>Gear & Bearings: Use filament that can withstand kinda low tolerances. PLA will do the job. If you have a seam cut it off after printing. To avoid a bad surface dont "fill the gaps".</li><li>Pulling rod: Print the Classic+ Rod with 3 Perimeter.</li><li>It is possible to separate the file into parts with your slicer ,)</li><li>I also like to break the corners of all parts by scraping over these areas with a knife. That makes the action smooth and gives a good handfeel :)</li><li>Power of Scaling: If you have difficulties inserting the axis you may reprint it scaled down a little. If it is too loose scale it up a little so it fits tight enough.</li><li>It is not necessary but I lubricated all mechanical pieces with some paraffin wax. A drop of Oil will do the job too but may be messy.</li><li>You can print all parts without support and put the parts together very easy.</li></ul>Attention: Don't use damaged Propeller!! A disbalance in the Rotation might destroy the Propeller and parts could fly Off. Especially with brital Material Like PLA.  New Mechanics Update: This is the right way to assemble the toy!<figure class="media"><div data-oembed-url="https://youtu.be/0pYzTrsRqqw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0pYzTrsRqqw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Since the design optimazion of the internal mechanics there is no glue needed at all!  &nbsp;I have also provided other beautiful designs for kids for free. For example, my latest is the ocarina to make music!<a target="_blank" href="https://makerworld.com/de/models/54693#profileId-58010" rel="nofollow noopener">https://makerworld.com/de/models/54693#profileId-58010</a>&nbsp;<figure class="image image_resized image-style-align-center" style="width:74.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2xl9blerr9l5.jpg"></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=WfEfctJU70o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WfEfctJU70o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;To get the most strength out of the pulling rods locate the seam to this location: (It is possible with the Prusa Slicer for example)<figure class="image image_resized" style="width:61.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_yj4redoaa581.png"></figure>&nbsp;Remix CultureI think this simple design is very open for you to bring in your designs too! So be invited to create even better propellers! (I uploaded the .step file of the core piece. [mm])&nbsp;<figure class="image image_resized image-style-align-center" style="width:66.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_sxifu6dn5if0.jpg"></figure>&nbsp;&nbsp;&nbsp;Update 06.07.2022Added a new (hopefully) more aerodynamik prop. This one flies even higher!(Added in standard download & single)Update 28.05.2023Increased the strength of the prop a little by adding a radius connecting the wings with the outer ring.Update 23.02.2023: NEW PULLING RODS! Some had proplems with a breaking pulling Rod. So I beefed up the old one (Classic+) and also designed 2 totaly new ones (Ergonomic & Hook). For the Ergonomic one you will need a M3 x 20+ Screw for assembling. I tested all with PLA in the local kindergarten and they withstand even rough abuse :PUpdate 27.09.2023: Due to different manufacturing tolerances the press fit does not always work directly (scaling the axle can work wonders) I have slightly reworked the inner mechanics. I'm happy about any short feedback on the new design!&nbsp;&nbsp;If you like my work I would be very happy if you share it with others and leave a like :)

Strong Flying Propeller / Pull Copter (No Supports)

Toys

user_2544666658

Model ported from thingiverse, adding here to include print profiles and layouts

Otrio Game

Boardgame

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_546aa3288407f.png"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 3 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 30 minutes to an hour to print! This Kirby&#39;s Dreamland pack includes the following Keychains: 14 versions of Kirby! King Dedede, Meta Knight, Mr. Shine, Mr. Bright, Hyper Power, Sleep Power, UFO Power, Wadle Dee, Waddle Doo, Kracko and Mr. Frosty!  Check out my other video game keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_8b305e64eb6ec.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-29_63a9c7e60eb5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_f5845cc2d0392.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_d1ba73dfcd793.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_5e1492eebe244.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_0369c2cf9dc17.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_8a985dbd6e78e.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_f63d08af7eba9.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-01-29_e933c8f690304.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Like this pack? Check out my other Pokemon keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162397/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td></tr></tbody></table></figure>