user_2324140584

CADScott

If you like this model and find it useful, you can support me in creating more by clicking on the Boost button above.&nbsp;NOTE: I have uploaded STEP files of all models. To access them  you just have to click on “Download or Print”, and then the REALLY badly labelled &#34;Download STL&#34; and it will show the raw model files, which are all STEP.&nbsp;UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter.&nbsp;This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that ensures that cover cannot accidentally open and release your precious data!There is also the ability to add a key ring hook that ensures that the cards cannot come out while also allowing the whole unit to be tethered.&nbsp;This Micro SD card / SD card holder should print on pretty much any printer, and there are multiple configurations to satisfy most storage requirements.&nbsp;Any material should be fine for printing, I used PLA in testing and had no issues.I recommend a layer height of 0.2mm or lower using a 0.4mm nozzle, all other wall and infill settings can be left default.When importing one of the step files, follow these steps:<ul><li>Import step file to blank project.</li><li>Split step file to objects in your slicer,</li><li>Orient the top piece (Without the holes) so that the top surface lies on the build plate.</li></ul>I have attached 3MF project files with this already done to save time.&nbsp;Naming of the files gives the number of Micro SD and SD with examples as follows:&nbsp;SD Card Slide Holder 18x2 (18 Micro SD cards, 2 SD cards)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419150/design/2024-04-19_d86de1c888a84.png">&nbsp;SD Card Slide Holder 10x1 (10 Micro SD cards, 1 SD card)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419150/design/2024-04-19_b901812cedbbe8.png">&nbsp;SD Card Slide Holder 4x1 (4 Micro SD cards, 1 SD card)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419150/design/2024-04-19_cfd5aeef944648.png">&nbsp;SD Card Slide Holder 4x0 (4 Micro SD cards, 0 SD cards)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419150/design/2024-04-19_7c4d6eefce1fb.png">&nbsp;SD Card Slide Holder 5X1+SIM (5 Micro SD cards, 1 SD card, 1 SIM Card Adapter, SIM Removal Tool Pocket)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000419150/design/2024-04-15_4e1c5fc6c50808.png">&nbsp;If there are any others sizes or configurations that are required, please leave a comment and I will generate it and add to this project.

Sliding MicroSD Card / SDCard Holder - Many Sizes!

camra use

Settlers

A little hedgehog figure&nbsp;You can find more <a target="_blank" href="https://makerworld.com/en/@Settlers/collections/1109767" rel="nofollow noopener">similar models here</a>&nbsp;Feel free to share photos of your prints!&nbsp;<figure class="table" style="float:right;"><table style="border:3px dotted rgb(153, 230, 77);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">These cute models are self-made creations which are free to use in any way you desire. Enjoy!</td></tr></tbody></table></figure>

Little Hedgehog

Leon Fisher-Skipper

<h2>This Feature got implemented for P1 and X1  Bambu Studio 1.9. Please update your slicer and use Bambus version, as you can easily adapt the retraction length and turn the feature on and off as you please. A1 and A1 mini still have to use the download here.  </h2><h2>Description:</h2>TLDR: This mod allows you to use a lower flush multiplier without the color bleed that it would have with the default profile. &nbsp;Great <a target="_blank" href="https://youtu.be/suFbfer1WhI?si=7mcjxLNhubW9WR1a" rel="nofollow noopener">video</a> by butter pocket prints explaining this change.&nbsp;<h2>How to use it:</h2><ol><li>Open the 3mf file and save the Nozzle Profiles of your Printer to your User Presets. It will tell you that the G-Code was changed, confirm with OK, as this is exactly how the profile works. The profile name has to be changed to save it.  </li><li>Now you need to adjust your purge settings! I would just set the multiplier to 0.5 on P1 and X1 and 0.65 on A1 and A1 mini. The values may now show red in the purge settings, but they will still work. </li></ol>!Dont use with Silk PLA!  !Confirm that you are running the newest Version of Bambu Slicer. Orca Slicer may work but is not tested!&nbsp;&nbsp;&nbsp;&nbsp;Original Post from 14.09.2023 on Printables with the title “bambulab profile for up to 60% purge reduction” which has sadly since been deleted by prusa:&nbsp;&nbsp;<h2>Orginal Description:</h2>The biggest issue with The Bambulab printers is that during multicolor printing ridiculous amounts of purge (dubbed poop by some) are generated, when switching colors.(Example: <a target="_blank" href="https://reddit.com/r/BambuLab/s/iMiT0Bis6i" rel="nofollow noopener">https://reddit.com/r/BambuLab/s/iMiT0Bis6i</a> or <a target="_blank" href="https://reddit.com/r/BambuLab/s/wDpB3A3N6k" rel="nofollow noopener">https://reddit.com/r/BambuLab/s/wDpB3A3N6k</a>)This has to be done to clear the Printhead of the old color and replace it with the new color.The Print head has a internal volume bellow the cutter of 110 mm3, meaning that at least 110 mm3 of filament has to be flushed and an additional amount to account for the transition when the old color mixes into the new color.Of these 110 mm3 in the hot end, only half get melted, as the rest stays in the cold part around the heat sink.Here comes a neat trick I found: Before cutting, the unmelted part can get pulled up so that it can be fed back into the AMS. When the new filament is feed into the hotend, it gets pushed in an additional 20mm.This means that for every filament change 50mm3 of filament is saved.As a result much less purge volume is required.When the print ends, the filament also gets pushed out 20 mm, to also save filament here.The filament gets pushed out another 20mm during purging when starting the print too, to account for the push-back when the print ends.   The saving results can be seen in the first picture.I used this model (<a target="_blank" href="https://www.printables.com/model/536401-bambu-lab-ams-purging-strips-p1p/files" rel="nofollow noopener">https://www.printables.com/model/536401-bambu-lab-ams-purging-strips-p1p/files </a>) by Joey_466945 and printed it once with the „Save filament Profile“ and once with the normal on. The flush Volumes have to be set to 0 for this test! Each line on the strips corresponds to 100 mm3. It’s clearly visible that each transition is shifted by 50mm3.For advantageous color combinations like blue and red these 50mm3 savings correspond to a very high saving percentage. Combinations which have a lot of color bleed like white to black need a lot of purging still, so the percentage saved is much less.I printed two benchies for comparison (the left one is the saving Profil) and the quality stayed the same, despite the flush volumes being reduced by 50mm3. The benchy with my profile generated 60% less purge.Both prints used a prime tower though which stayed the same size.  The Profile only changes 8 lines of code in the G-Code.I tested thousands of filament changes and had no issues. Tests have been done on X1C, P1P, P1S and A1 mini. Edit: Silk PLA and Bambu support material should not be used with this profile. Tests by Bambulab indicate problems.   &nbsp;&nbsp;&nbsp;—————————————————————————————————————————————————UPDATE 01.02.2024: I made a mistake with the A1 and A1 mini profiles. Retraction was now lowered and should improve reliability. Max. savings with A1 and A1 mini is now 33% and the net savings per filament change is 36 mm3. P1 and X1 still have a max saving of 45% and a net saving of 50 mm3. This is due to the changed geometry of the hotend, because the hot zone is a bit longer. This reduction is more on the conservative side, it is probably possible to get away with more savings, but I can’t test it yet as I don’t have a A1 or mini. &nbsp;UPDATE 25.01.2024: Bambulab updated the A1 and A1 mini print profiles, so I also updated them to the current version.I have also heard back from Bambulab and they are testing the feature. They have run into problems with Silk PLA though, so it seems it works not with all filaments perfectly. <a target="_blank" href="https://makerworld.com/en/u/1929892454" rel="nofollow noopener">@EyemJoe</a> also mentioned problems with Support filament. If you use these two filaments be careful. &nbsp;UPDATE 11.01.2024: I changed the start G-Code as on some printers the Load Line was incomplete on some printers.Thanks to <a target="_blank" href="https://www.printables.com/@Cosquilla_523214" rel="nofollow noopener">@Cosquilla_523214</a> for pointing me to the issues and suggesting a fix. I also changed the title, as the calculated maximum saving is 45% for this method and not 60% as the title stated before. The 60% was what I observed on my testprint, but this was with a small quality reduction. 45% is without a quality reduction. &nbsp;I have also found out that Bill from 3D chameleon also was using retractions to reduce waste on the Bambu Printers a couple of months before me. I independently came up with this, but his hardware based solution is also very interesting. The big difference is, that my profile doesn’t require any hardware changes. If you are interested in multi color printing, his Chameleon is very interesting and was one of the smartest and best solutions before the Bambu AMS. It also makes Multi-color printing possible on any printer. If you are interested visit his <a target="_blank" href="https://www.3dchameleon.com/" rel="nofollow noopener">Website</a>, where he will also soon launch the MK4 version. &nbsp;UPDATE 18.12.2023: Now Profiles for all Bambu Printers and all Nozzles including A1, A1 mini and X1E.Thanks for @rc2k7_1528233, @Sven and @AustinWolt_1104655 for testing the A1 mini Profile.@AustinWolt_1104655 also made a <a target="_blank" href="https://www.youtube.com/watch?v=VLgqqTbFd3k" rel="nofollow noopener">Video</a> explaining how to use the Profiles.&nbsp;UPDATE 12.12.2023: I added profiles for all nozzle sizes and Printers including the P1P, P1S, X1C and one experimental profile for the A1 mini.All the profiles are saved in the same file. Save those you need to your User Presets.I also slightly updated the documentation in the code to make it more clear.&nbsp;UPDATE 20.09.2023: G-Code was modified so that the calculated amounts of waste from Bambu Studio are accurate. Before there was a small discrepancy.I also wrote the G-Code down below with instructions how to use the settings without the download.—————————————————————————————————————————————————  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;To use the changes without the download do the following:To use these changes go into Printer Profil and select one of the Profiles you want to change. If you dont use any custom profiles, just use the standard, in my case “Bambu Lab X1 Carbon 0.4 Nozzle” for the 0.4 Nozzle. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000091241/design/63485d3f-933c-4abc-8283-a9125362f931.webp">Then go into “Machine G-Code” and edit the G-Code in 3 of the text fields like described below. Save the changes afterwards.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000091241/design/cbd86d0a-eac5-47e9-a52a-960c6a8dd46d.webp">&nbsp;Changes to the g-code are marked bold in the PDF documentation.

Reduce purge by up to 45%.

seting

The Printer

Hi all,&nbsp;I´ve made a pencilholder for the skadis pegboard from ikea. It has a great design and can be printed without any supports. The two hooks are printed with 100% infill, fit perfect and hold the pencilholder tight on the board. I have designed the pencilholder with two spacers on the backside so when you hang it on the pegboard it stays straight and dosn´t lean forward. It feels pretty sturdy and could easily hold everything you could fit in it. &nbsp;I have printed the pencilholder without supports and on the side there are a couple of places with imperfections in the printprofile. If you can get rid of them with playing with the print settings please comment your solution ! &nbsp;Dimensions : 105 x 42 x 90 mm&nbsp;Like and download the STL-File and the print profile it´s free ;) and I would very appreciate every single like and download. I am looking forward to do more things for the Skadis pegboard so follow for more !&nbsp;Have fun and thank you !&nbsp;The Printer

Ikea Skadis Pegboard Pencilholder / Container 

ikea tool

wojteq5

Bio Waste Bin - a helper hung on the kitchen cabinet door, e.g. for peeling vegetables.Just put a small disposable bag on it and you're done!You can slide leftovers directly from the kitchen counter into the bin.The model is adapted to 20 mm thick kitchen doors - if anyone needs a different size, please let me know in the comment!&nbsp;Enjoy!

Bio Waste Bin

home

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_zpk0zhn91zj7.png"></figure><h4>Dimensions (LxWxH)</h4>170 x 96 x 65mm (100% scale)<h4>Basic information</h4>After multiple requests, I've decided to revisit my previously uploaded Orca design, and articulate it. Unfortunately Mattes beat me to it, and has already uploaded an <a target="_blank" href="https://makerworld.com/en/models/186429#profileId-205262" rel="nofollow noopener">Orca model</a> himself, so definitely check it out as well. I've decided to release the design anyway, as it would be a pity to scrap it completely, especially considering all the work that has been invested into it. I believe that my implementation of this idea still has something to offer, and isn't just a blind “copy” of the already existent design. It's unfortunate, that we both had the same idea at the same time, but I think there is enough space for both of us. I just wanted to clarify that, as I don't want to look like a copycat, or the Edison of 3D modelling :)&nbsp;Now briefly about the design itself: The model has 8 movable parts: The body is split into 6 segments + 2 movable fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup. Good cooling is very important, as the dorsal fin is fairly thin, and sticks out. It's advised to print at least two instances of the model to give the fin enough time to cool down and solidify, especially if your machine has trouble with cooling, or if you're printing a significantly downscaled version.<h4>Files information</h4>I've included 3 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Singlecolor and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 2 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_cbwntm48bfb1.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_c7okytd6aceh.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_y881a3834u7b.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/590665/2024-02-26_2nc49uiutzxt.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.

Articulated Orca (singlecolor and multicolor)

擺設

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

tools

哼哼哈嘿

This is a desktop storage product where you can store your cosmetics, remote control, parts, or other suitable products in your favorite colors and materials.&nbsp;The entire product does not require support. The side wall has a thickness of 2mm and the bottom layer has a thickness of 3mm to make the product more sturdy.&nbsp;Attention: It is best to increase the printing of the skirt edge, or I personally prefer to slow down on the first layer to prevent the occurrence of failure caused by warping the edge.&nbsp;Finally, I wish you a pleasant printing experience.

camra use

toy

seting

ikea tool

home

擺設

tools

收納