Hesoj_Yarwar

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Gardening 

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Storage

fay3dlab

This is my entry to the flying object competition.. So i have been brainstorming of a design i can make for the competition and i knew i will make a suspended model for it.. But to make it different than my usual suspended model i need to add another element.. that's where the tensegrity comes in.. Tensegrity is basically a model that is floating solely by the tension integrity from the weight of the model itself.. in other words.. the X-wing will look like its floating and only supported by the suspended strings.. Like all my suspended model.. it will be printed in one piece except for the 4 back thruster engine.. that needs to be installed after print.. Once printed.. you need to be very careful when getting it off the bedplate since unlike other suspended model.. this one is held by very little strings.. the wings are held by 10 strings in total..&nbsp;I have also prep the model so that you can easily paint parts for multicolor prints.. <img src="https://makerworld.bblmw.com/makerworld/draft/378390/2023-12-02_24f73bb26f471.png"> I've made the model small in size cause of the weight of the x-wing that the strings will have to bear.. and so that our A1 mini owners can join in the fun of printing this suspended tensegrity modelOne important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie adv fighter

Suspended Tensegrity X-Wing

Other Display Items

Encrust3d

Mandalorian figurine remixed to add Grogu, and still prints without supports needed. For the remix, I increased the base size, combined and added Grogu, added a few crystals to support Grogu's hands, and used meshmixer to mesh the crystals with the base. I printed .16mm layer height with polyterra pla, no supports needed.

Mandalorian and Grogu Figurine - no supports

Statues

Adwix_1

Itachi from the Naruto series is a cool and mysterious ninja known for his strong abilities and complex past. He is a member of the Uchiha clan, which is famous for their powerful eye techniques, and Itachi is one of the best. His character is often associated with dark themes and a deep story about family and honor. I hope my creation will evoke similar feelings of mystery and strength that Itachi represents in the series.&nbsp;&nbsp;If you would like to support me, consider these option:<a target="_blank" href="https://www.tipeeestream.com/adwix1/" rel="nofollow noopener">https://www.tipeeestream.com/adwix1/</a>

Itachi scene

Naruto

Tomany

Convenience gadget for organizing your material samples. Compact and elegant design resembling a small book, with pages that slide out like a filing system. For the internal cards, I’ve designed two versions—one suitable for accommodating Bambu Lab palettes (24x24x2mm) and the other for <a target="_blank" href="https://makerworld.com/en/models/214478" rel="nofollow noopener">30x30x2mm</a> palettes that I’ve created, and I’ve attached a 3mf file of them. Returning to the organizer, it has been designed to be modular, with each module capable of holding up to three cards. You can decide how to assemble it; in the available files, there’s a PDF with instructions for assembling both versions. However, if you have any doubts, don’t hesitate to contact me; I’ll respond as soon as possible.I also attach 3D PDF files that you will need to better visualize the assembly, they can be easily viewed with Adobe Acrobat or similar software.&nbsp;On the bottom of the organizer and on each card, I’ve prepared slots for adding small magnets (Ø3x2mm) to keep the cards securely in place. You can decide whether to install them or not; you will need two for each card and the same number on the bottom.&nbsp;ATTENTION!!! The magnets must be fixed with cyanoacrylate glue or similar!&nbsp;For assembling the two-module version, you’ll need 16 screws, either 3x8mm or alternatively 3x6mm, and for the three-module version, you’ll need two more. The interlocking of the side panels is precise enough that no glue is necessary. However, if there are excessive tolerances in your printer’s work, you can add a little glue to keep them in place.&nbsp;Information for printing:All components were printed in PLA with a 0.40mm nozzle and a layer height of 0.20mm with the exception of the lateral guides, for which I set a layer height of 0.14mm, I reduced the speed of the walls to 150mm/ s and brim is activated to keep warping to a minimum. For the two cheeks, however, I activated the supports, set the fill texture to gyroid and activated the brim.&nbsp;I hope my project meets your expectations. If you need any additional accessories or have any suggestions, feel free to contact me. I’ll be happy to receive your feedback or requests.&nbsp;As always, I apologize if my way of expressing myself in English is not perfectly correct, but since I don't know the language well, I have to rely on Google Translate.&nbsp;Purchasing link:<a target="_blank" href="https://www.supermagnete.it/dischi-magneti-neodimio/disco-magnetico-3mm-2mm_S-03-02-N" rel="nofollow noopener">https://www.supermagnete.it/dischi-magneti-neodimio/disco-magnetico-3mm-2mm_S-03-02-N</a>&nbsp;https://it.aliexpress.com/item/100-pz-lotto-vite-autofilettante-a-testa-cilindrica-con-impronta-a-croce-M1-M1-2-M1/1005003330377202.html?spm=a2g0o.productlist.seoads.6.1a55KfvhKfvhJZ&p4p_pvid=20231227101918205751828993250001481744_3&s=p

Gardening

Storage

Other Display Items

Statues

Naruto

Filament