宇宙无敌超级球棒侠

shelby-eleanor

<h2>Description and assembly</h2>The model contains these objects: 5 pots, soil, tree stems and six leaves.Assembly is very easy. No magnets or glue are needed. Soil goes in the pot, stems go in the soil and leaves go on top of the stems.The assembled model has approx dimensions: 20x20x27cm.&nbsp;<h2>About the model</h2>The model is divided into several objects:<ul><li>Plant pot – Dimensions: 65x65x55mm.</li><li>Soil – Contains 3 holes for stems.</li><li>Leaves – There are 6 different leaf designs, all are divided into parts and pre-colored. While printing the leaves there will be 6 color changes. Approx leaf dimensions are: 90x100x2.5mm.</li><li>Stems – There are 3 stem designs. Supports are needed only for the tips of the stems.</li></ul>&nbsp;Colors:I printed stems and leaves in leaf green and white color. The pot is gray and the soil is dark brown.&nbsp;<h2>Print profiles and suggestions</h2>Printing suggestions:<ul><li>Use slightly higher nozzle and bed temperature for the first layer when printing leaves to have fewer gaps between colors</li><li>Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s</li><li>Supports are needed only for the tips of the stems.</li></ul>&nbsp;Suggestions for scarf seams:<ul><li>Use scarf seam for printing the pot. With scarf seam the pot is almost seamless. Use these settings in Quality tab:</li><li>Outer wall width: 0.6mm,</li><li>Scarf joint seam: Contour,</li><li>Conditional scarf joint: on,</li><li>Wall generator: Arachne,</li><li>Wall printing order: Inner/Outer/Inner.</li></ul><h2> Commercial Use</h2>This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: <a target="_blank" href="https://patreon.com/noordinaryleaf" rel="nofollow noopener">https://patreon.com/noordinaryleaf</a>

Monstera adansonii variegated with 6 leaf coasters

书签

dalelovelace

Heatbed cable chain that clamps onto the rubber nub on the frame, and screws into the cable clamp on the bed. I printed the chain from PLA, but printed the piece that attaches to the bed from PETG. I plan to print it from ASA on my X1C as soon as it gets through with the 26 hour print it is on now. This should prevent the cable from crimping even if you lean the printer back or put it too close to a wall. Requires 2 - 3mm x 16mm or 20mm cap head screws, and 2 - 3mm nuts for the frame mount, 1 - 2mm x 16mm cap head screw for the bed mount.&nbsp;Remove the 2mm screw from the cable clamp on the bed, and attach the bed mount with the required 2mm x 16mm cap head screw. Insert the 2 - 3mm nuts into the frame mount, butt the frame mount against the frame as close as possible, and attach with the 2 - 3mm x 16mm cap head screws, then assemble the rest of the chain&nbsp;I used the same chain that I have used many, many times on various Creality and Geeetech printers for the Heatbed cable.&nbsp;Since it appears that some cables are longer than others, I have added a file with only 4 extra links in it for convenience.

A1 Heatbed Cable Chain

giacomo.borghi02

A mod to add the heated chamber to your X1C or P1S&nbsp;BOM:<figure class="table" style="float:left;width:37.93%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td>1.</td><td>12032 FAN</td><td><a target="_blank" href="https://www.amazon.com/s/?search-alias=aps&field-keywords=12032%2024v&tag=mobile0c221e9-20" rel="nofollow noopener">US</a> <a target="_blank" href="https://www.amazon.it/gp/search?ie=UTF8&tag=jackmeow-21&linkCode=ur2&linkId=4e0780a3b33fbada7be88fbb2a7a92c5&camp=3414&creative=21718&index=electronics&keywords=12032%2024v" rel="nofollow noopener">IT</a></td></tr><tr><td>2.</td><td>PTC 220V/110V/24V 100W</td><td><a target="_blank" href="https://www.amazon.com/s/?search-alias=aps&field-keywords=PTC%20220V%20100W&tag=mobile0c221e9-20" rel="nofollow noopener">US</a> <a target="_blank" href="https://www.amazon.it/gp/search?ie=UTF8&tag=jackmeow-21&linkCode=ur2&linkId=06a4062e37f56e89e8bf38d0f4af4b03&camp=3414&creative=21718&index=electronics&keywords=PTC%20220V%20100W" rel="nofollow noopener">IT</a></td></tr><tr><td>3.</td><td>XH-W3001 or any Thermostat Switch</td><td><a target="_blank" href="https://www.amazon.com/s/?search-alias=aps&field-keywords=XH-W3001&tag=mobile0c221e9-20" rel="nofollow noopener">US</a> <a target="_blank" href="https://www.amazon.it/gp/search?ie=UTF8&tag=jackmeow-21&linkCode=ur2&linkId=72b7146bc2362c9c0768880fd60114dd&camp=3414&creative=21718&index=electronics&keywords=XH-W3001" rel="nofollow noopener">IT</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;take a look at the model <a target="_blank" href="https://a360.co/49qDlUB" rel="nofollow noopener">here</a>

书签

A1

散热