Torch

AU3D

This connector facilitates the flush mounting of multiple Skadis boards, the Original and all of my DIY <a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards</a>. It is specifically designed for the white Original Skadis board and any variants with a thickness of 5.0 to 5.1 mm.<h3>Installation</h3>There are two sizes of connectors available. The taller connectors are designed for the top and bottom side of the board where the holes are further apart. The print profile includes two short and two long connectors, which is an ideal combination for the largest Skadis boards. However, feel free to mix and match according to your needs. Ensure you properly remove the supports; otherwise, the gap between the connector and the hooks may be incorrect and you will have a hard time installing the connector. You will need to apply some force to push the connector down, which is completely normal. If you have trouble seating the connector, use a plastic tool (e.g. a printed bed scraper) to help push it into place. Avoid using hard objects, as they might scratch your board. Please be careful not to hurt yourself while doing this.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul>

IKEA Skadis Connector (horizontal)

skadis

karol7162

Model of Pathfinder from Apex, ripped from game files.Lyche Slicer warned me about holes in the model and my print ended up without an arm so your mileage may vary.&nbsp;

Apex Legends Pathfinder Figure 

figurines

3DMagpie

I wanted a simple, modern, streamlined little shelf I could scale to different sizes and mount all over the wall behind my desk. I wanted to be able to customize the color and look to create a feature. I was inspired in part by picture frame walls full of thrifted and found objects. Looks great in wood filament as well as plain ol' PLA. &nbsp;Great for displaying mementos and smaller prints. Especially if you need to get them off the top of your desk and out of reach of your print-grabby cat. (Not the three-eyed one pictured. The live one that does a great impression of an actual monster.)&nbsp;Designed to be mounted with removable mounting methods like Command Adhesive. I like the clear strips as the tabs virtually disappear and the shelf is nearly flush with the wall. Also works with the standard and moisture resistant ones as well as hook and loop. I ran out of the clear and used the hook and loop kind for a totally hidden mount on the 150% version. &nbsp;Works great as fridge or metal cabinet magnet, too. Add a large, flat magnet to the wall side. Pictured in the last image with a round, 20 mm x 2 mm self-adhesive standard magnet at 75%. I'd recommend larger and rare earth (stronger) to hold anything that's not super lightweight. &nbsp;I've uploaded a print profile for one shelf and six shelves. I've also made one for AMS users who may want to print two-color. &nbsp;Tested at 75%, 100%, and 150%.

Wall Ball | A Simple & Sturdy Rounded Shelf

To sell

oli.mckeown

Another Odin adapter. Works for mp5, arp9, P90 etc. all the obscure stuff. Bit finiky to hold but simple and easy to make.

Odin adapter

Airsoft

PD - Potter Design

TOKYO MARUI MK23 ADAPTER 14mm CW TO 14mm CCW - TOKYO MARUI MK23 ADATTATORE 14mm CW TO 14mm CCW

TOKYO MARUI MK23 ADAPTER 14mm CW TO 14mm CCW - TOKYO MARUI MK23 ADATTATORE 14mm CW TO 14mm CCW

MK23

Perfect

将M1.5-M6的螺母分类储存的装置，分类时从M1.5开始，使用螺母时从侧窗倒出，如果喜欢请打赏一下，并留下宝贵意见和建议。

螺母分类装置

things to make

FunTuan