KARINA

reddadsteve

Porky Pig, from the Warner Bros. Looney Tunes and Merrie Melodies series of cartoonsPorky was the first character created by the studio to draw audiences based on his star power, and the animators created many critically acclaimed shorts featuring the him. He is known for his signature line at the end of many shorts, &#34;(stutter) that&#39;s all, folks!&#34;Some supports are required on one piece, head (see notes below). If you have the proper filament colors, no painting is needed.The assembled model is 225mm tall..Enjoy!...........................................................................................................Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback. Special thanks to Jason McMillan (makerworld ID Gatekeeper) for creating the Bambu Print Profile............................................................................................................**Print Instructions:** Supports: head (see notes for details) Resolution: .2mm Infill: 15% *****************Building the model**ColorsBlack: (Devil Designs PLA - Black) eyeblack_left eyeblack_right eyebrow_left eyebrow_right hoof_left hoof_right mouth words_holder ..Red: (Hatchbox PLA - True Red) tongue words tie_left tie_right ..Green: (Hatchbox PLA - True Green) base ..Blue: (Paramount3D PLA - Cadet Blue) jacket hat ..Skin: (Paramount3D PLA - Universal Beige) head hand_left hand_right body tail ..White: (Devil Designs PLA - White) cuff_left cuff_right eyewhite_left eyewhite_right .. ****************************************...........................................................................................................**Printing and assembly tips**Printing tips:1 - Supports are required on the following part: head (I used organic/tree supports, from base only, 30deg overhang)2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative to ensure the least chance of a print failure, especially since the base of many parts are hidden when inserted into another part. *I used a brim on: hand_left hand-right tie_left tie_right3 - When removing parts from the printer bed, it&#39;s a **VERY** good idea to place left/right parts into separate containers to help with the assembly process. Sometimes the difference between the left and right parts is very small but it is still worth keeping track of them (especially if you size up the model significantly) and assembling them in their proper place... Assembly tips:1 - Take your time gluing the model together and enjoy the process. Dry fit all the parts and give some thought into which parts to glue together as groups and then gluing the groups together. Let the glue for each group set completely before combining groups.2 - I used 3D Gloop and E6000 to put this model together. Each type of glue has different pros/cons and I found that fast drying 3D Gloop was far easier to use than superglue (for me). The E6000 sticky glue allows more time to position parts and is still the best for smaller parts. For both glues using a smaller amount is usually better than more glue.3 - Assembly is straight forward, however there are two suggestions that came up during QA: Put in the cuffs first into the jacket to ensure proper alignment before putting in the hands. Put in the tail last to avoid potentially breaking it while building the rest of the model.4 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.

Porky Pig

Personagens antigos 

Kocyns

<h3>Video <a target="_blank" href="https://www.youtube.com/shorts/jN4a0KtUdq0" rel="nofollow noopener">here</a></h3><figure class="media"><oembed url="https://www.youtube.com/shorts/jN4a0KtUdq0"></oembed></figure><h3>Options</h3>You have a choice of 4 designs. Select the design in the selection plate 1-4.<figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_f202a73d30b8d.png"><figcaption>Plate 1</figcaption></figure><figure class="image image_resized" style="width: 50.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_3adce59e9b6ce.png"><figcaption>Plate 2</figcaption></figure>&nbsp;<figure class="image image_resized" style="width: 49.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_f8bf8688ec14e.png"><figcaption>Plate 3</figcaption></figure><figure class="image image_resized" style="width: 49.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-14_0a11e8805bd22.png"><figcaption>Plate 4</figcaption></figure>&nbsp;<h3>Purchased part</h3><figure class="image image_resized" style="width: 50.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_e0602650ac9c7.png"></figure><figure class="table"><table><thead><tr><th>Part</th><th>Destription</th><th>Qty</th><th>Aliexpress</th></tr></thead><tbody><tr><td>Speaker 10W</td><td>1.5 inch (40mm) 4ohm 10W</td><td>2</td><td><a target="_blank" href="https://www.aliexpress.com/item/32624188122.html?spm=a2g0o.order_list.order_list_main.35.74ea1802FwUI5g" rel="nofollow noopener">here</a> or <a target="_blank" href="https://www.aliexpress.com/item/1005006108375871.html?spm=a2g0o.productlist.main.17.5417HDdoHDdo0I&amp;algo_pvid=54af45b7-42fc-48a3-872c-8093288f0524&amp;algo_exp_id=54af45b7-42fc-48a3-872c-8093288f0524-8&amp;pdp_npi=4%40dis%21CZK%21504.63%21312.93%21%21%2121.27%2113.19%21%402103868817188834485483209ea660%2112000035784465628%21sea%21CZ%214883298268%21&amp;curPageLogUid=mnZmuAojYass&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">here (5W)</a></td></tr><tr><td>Bluetooth module</td><td>MH-MX38</td><td>1</td><td><a target="_blank" href="https://www.aliexpress.com/item/1005005139861504.html?spm=a2g0o.order_list.order_list_main.22.74ea1802FwUI5g" rel="nofollow noopener">here</a></td></tr><tr><td>Passive Diaphragm</td><td>78x41mm</td><td>1</td><td><a target="_blank" href="https://www.aliexpress.com/item/32908199744.html?spm=a2g0o.productlist.main.5.4475KMGPKMGPHI&amp;algo_pvid=7517faa6-9f6f-4c74-8b05-6b3485bd233e&amp;algo_exp_id=7517faa6-9f6f-4c74-8b05-6b3485bd233e-2&amp;pdp_npi=4%40dis%21CZK%21104.43%21104.43%21%21%214.43%214.43%21%40210384b217183995125027946e56c8%2165860302851%21sea%21CZ%214883298268%21&amp;curPageLogUid=9huQmQfrPZve&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">here</a></td></tr><tr><td>Screw</td><td>M3x8</td><td>6</td><td>-</td></tr></tbody></table></figure><h3>Assembly</h3>First, insert the speakers, then secure the two brackets of these speakers using screws. Next, connect the connectors and slide the board into the slot.<figure class="image image_resized" style="width: 50.11%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_c03b7d5236095.png"></figure>Trim the membrane similarly to how it is shown in the photo. The size and position correspond to those of a USB-C connector.<figure class="image image_resized" style="width: 50.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_607e97685be3a.png"></figure>&nbsp;<figure class="image image_resized" style="width: 49.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000495294/design/2024-06-15_aece062a20d3b.gif"><figcaption>Cover the membrane with the back cover as shown in the animation.</figcaption></figure>&nbsp;

Bluetooth speaker

caixa de som

migueljeronimoa

This script generates a customizable piggy bank from personalized text. The 3D printable model includes an integrated hole for inserting coins making it both functional and stylish. Customize the name, font, text size, extrusion height, and hole diameters to create unique piggy banks. Perfect as a gift for your children, a piggy bank labeled with the name of your dream vacation destination, or any other creative idea you have in mind.<h2>Instructions:</h2><h3>Parameters:</h3>- mode: - Preview: In this mode, the text will be faced up and extra extruded for easier visualization of the final design. - Print: Select this mode once you are satisfied with the result. It will face down the text and generate a flat surface for printing. - name: The desired text to show. - font: Choose your preferred font from the available options. - textSize: Font size. - extrudeHeight: The height of the piggy bank. - coinLidHoleDiameter: Set the diameter of the coin lid hole. - coinSlotWidth: Width of the coin slot. - coinSlotLength: Length of the coin slot. - flatBase:If it is active, it will set a flat base for letting the lightbox stand straight (usefull when the text has letters like “g” or “j”)<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">left: flatBase OFF right: flatBase ON <img class="image_resized" style="width: 219.859px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-06_c3817b60af0f7.jpg"></td></tr></tbody></table></figure><h4>Expert options:</h4>- baseWidth: Width of the base (flat surface of the box). - coinHoleXOffset/coinHoleYOffset: Values to manually move the position of the coin hole. - coinSlotYOffset: Y offset for the coin slot. - lidStep: Step size for the lid. - nameLayerHeight: Height of the layer containing the text. Set to 0.8mm as tools for painting in Bambu Studio do not go deeper than 0.4mm; increasing this value might result in unpainted layers. - lidSecureClipLength: Length of the clips holding the coin lid. - lidSecureClipWidth: Width of the clips holding the coin lid. - coinLidBaseWidth: Width of the base of the coin lid. - coinLidBaseExtraRadius: Extra radius for the base of the coin lid. - notchHeight: Height of the notch.- fillGaps: When using spacing or symbols that only fill the upper part of the piggy bank, you can activate this flag to fill the bottom gap. <figure class="table" style="height: 267.703px; width: 812px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">fillGaps OFF <img class="image_resized" style="width: 384.547px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-06_c831858f1d07.png"></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">fillGaps ON <img class="image_resized" style="width: 373.078px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-06_25a9c2da90ae9.png"></td></tr></tbody></table></figure><h3>Exporting STL:</h3>- Ensure the mode is set to &#34;print&#34;. - Export the model as an STL file, ready for 3D printing.&nbsp;<h3>3D Printing:</h3>- Load the STL file into Bambu Studio. - Use the paint bucket tools and hover over the area where the letters should go. The name will be highlighted, and you can color the different parts of the model. - The name is exported face down for better results in the first layer, so DO NOT FORGET TO COLOR UNDER IT.&nbsp;<h4>How to run the script locally:</h4>- Running the script in the regular OpenSCAD version will cause several warnings. - Use the &#34;Development Snapshot&#34; version of OpenSCAD. - Once installed, go to: Edit→Preferences→Features And check the textmetrics feature.&nbsp;<h3>Known issues:</h3>- Some special characters are not shown. - Maker World forms do not allow some special characters (some will not be displayed, others will cause an error while generating the model). If you want to use these characters, edit the text directly in the code editor.&nbsp;&nbsp;<h3 style="text-align: center">Some of my related work, you will probably like:</h3><figure class="table" style="width: 77.87%"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="https://makerworld.com/en/models/484240#profileId-396575" rel="nofollow noopener">Suspended heart text generator</a><figure class="image image_resized" style="width: 268.094px"><a href="https://makerworld.com/en/models/484240#profileId-396575" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-12_56c29f05dcdeb.png"></a></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="https://makerworld.com/en/models/484240#profileId-396575" rel="nofollow noopener">Suspended text generator</a> <a target="_blank" href="https://makerworld.com/en/models/484240#profileId-396575" rel="nofollow noopener"><img class="image_resized" style="width: 286.797px" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-04_bda36c4e163d7.jpg"></a></td><td><a target="_blank" href="https://makerworld.com/en/models/480593#profileId-392200" rel="nofollow noopener">Lightbox generator</a><figure class="image"><a href="https://makerworld.com/en/models/480593#profileId-392200" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000507843/design/2024-06-23_6f6404e4dfe2f.webp"></a></figure></td></tr></tbody></table></figure>

Text Piggy bank generator

cofrinho

Jheffer

<h3>If you like my design, leaving a BOOST would help a lot!</h3><h3>All of your comments, ratings and follows helps me spend more time on creating new projects and updating my designs!</h3>Pet Food Scoop&nbsp;It holds about 2,5 dl or 1 cup.Rounded handle for a nice grip and chamfered edges to easily get the food into the scoop.&nbsp;Designed for pet food, but it can be used for other uses as well.&nbsp;&nbsp;&nbsp;

Pet Food Scoop - No Support

objetos para cachorro

depep1

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000461031/design/2024-05-16_921c4dcfa4ea2.png"></figure>&nbsp;Is your 600% Dummy13 feeling lonely? Does he need a friend? Why not print him a 600% K9! Using my same Dummy13 Joints+ system, I remixed TClears Dummy13 K9 model from printables to be printable at larger scales. I printed mine at 600% scale using half Glue and Half Bolt Parts. It used 600g Black Pla and 900g Orange Pla. No joints snapped when I first assembled them however throughout a few failed versions of assembling and disassembling, I noticed the joint did snap slightly. Not enough to see and it did not affect the joint&#39;s tension. All the joints are stiff enough to hold up the model&#39;s weight.&nbsp;Fusion360:To use these parameters, open the F360 file &gt; go to modify &gt; change parameters.If you plan to modify the model, drag the timeline marker past the Scale Icon. This will set the model to 100% scale and Show only the main joints. <img class="image_resized" style="width: 9.61%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000461031/design/2024-05-11_be3bb77c5368d.png">Parameters:<ul><li>JointAOffset is for the Rib, NeckSeg, HeadSeg, and UpperLeg joints. Increase this value if you get gaps in the joints when slicing.</li><li>JointBOffset is for the TailJoints and TailTip. Increase this value if you get gaps in the joints when slicing.</li><li>Scale is the scale of the model. 1 = 100% 6 = 600% Change this to whatever scale you desire.</li><li>FlexGap is the gap that is present in the joints. Adjust this as needed with a smaller number giving a tighter joint that is harder to connect.</li><li>UsingBolt is if you plan to bolt together or glue together the model. 1 to Bolt together | 0 to Glue together</li><li>BoltSize is the M size of the bolt you are using.</li><li>BoltHeadSize is the size of the head of the bolt.</li><li>BoltHeadDepth is the depth or length of the head of the bolt.</li></ul>Assembly:<ul><li>Depending on what you choose, you will either need bolts or glue.</li><li>Follow TClears Instructions PDF. You can get it <a target="_blank" href="https://www.printables.com/model/691806-k9-companion-alpha/files" rel="nofollow noopener">Here</a>.<ul><li>The only difference is to slide the LowerLegArmor onto the lower leg before snapping on the Ankle.</li></ul></li></ul>

Dummy13 K9 Parametric

dummy 13

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a four color Hueforge, it will require three pauses with manual filament changes.&nbsp;&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max Space Gray Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #28 (2.32mm) swap to Space Gray At layer #34 (2.8mm) swap to White for the rest.

Stormtrooper Helmet Sign Hueforge NO AMS Needed

Hueforge

Raka Prints

This is my take on the 3D calendar of the 2024 season of Formula 1.&nbsp;Everything is facedown for the Textured PEI sheet finish.Flags are printed on photo paper not normal paper so it shines more. You can find them in the pdf file.If you need the text/word file message me and I will send it to you.&nbsp;If you want to support me you can always buy me a coffee - <a target="_blank" href="https://www.buymeacoffee.com/rakaprint3d" rel="nofollow noopener">https://www.buymeacoffee.com/rakaprint3d</a> -Or use my eSun affiliate link or use my code “RAKAPRINTS” for 10% off.Aff. link: <a target="_blank" href="https://esun3dstore.com/?ref=RaKaPrints" rel="nofollow noopener">https://esun3dstore.com/?ref=RaKaPrints</a>&nbsp;Materials needed:Esun PLA+ Black, Red and WhiteFoam board (700mm x 1000mm)Double-sided tapeSuper glue&nbsp;&nbsp;Update:02/01/2023: Curb connectors Layout (PDF) added03/01/2023: Shangai changed to Shanghai04/01/2023: Added F1 template for glueing the track, flag, land and city.16/01/2024: Dates added (new print profile).13/02/2024: Added a new template for Country, city and date.

F1 Calendar - 2024

formula 1

TripleGWorkshop

I developed this to hold most of a 5m strip of LEDs, cut off or tuck in the remainder.LEDs HERE <a target="_blank" href="https://us.store.bambulab.com/collections/led-strip-light?skr=yes" rel="nofollow noopener">https://us.store.bambulab.com/collections/led-strip-light?skr=yes</a><figure class="image image_resized" style="width:48.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/711315/2024-03-15_3b292fe7a653e.gif"></figure>Super easy instructions:Poke the wire through the bottom hole.<figure class="image image_resized" style="width:48.31%;"><img src="https://makerworld.bblmw.com/makerworld/draft/711315/2024-03-15_8011e060cf64.jpg"></figure>&nbsp;Remove backer and tightly stick the LED strip up the inner tube.<figure class="image image_resized" style="width:53.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/711315/2024-03-15_c8162741b2273.jpg"></figure>&nbsp;Put the parts together and plug in, so simple!<figure class="image image_resized" style="width:52.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/711315/2024-03-15_050da26300d95.jpg"></figure><figure class="image image_resized" style="width:54.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/711315/2024-03-15_29ea4795a491a.jpg"></figure>&nbsp;The remote receiver is outside the lamp and works perfectly!

⬡ Hex Lamp for LED Strip Lights

luminaria

Galactic Armory

A 1:12 and 1:48 scale Helldiver miniature! &nbsp;This model is 1 of 20 poses available in the full set of miniatures currently available on the Galactic Armory Patreon until June 1st 2024: <a target="_blank" href="https://patreon.com/galacticarmory" rel="nofollow noopener">https://patreon.com/galacticarmory</a>&nbsp;The full set is also available for purchase here: <a target="_blank" href="https://galacticarmory.net/collections/latest-3d-files/products/1-48-scale-helldivers-3d-print-files-1" rel="nofollow noopener">https://galacticarmory.net/collections/latest-3d-files/products/1-48-scale-helldivers-3d-print-files-1</a>&nbsp;The full set also includes pre-supported variants, pre-separated pieces, and alternate helmets!

Helldiver Miniature

action

jwalker55

Simple spiral vase. 2 versions included: one with sharp edges and one with smooth edges. &nbsp;Size is around 96mm in diameter x 138mm tallScale in your slicer to your preferred size. Print using spiral vase mode in your slicer.

Spiral Vase

vazinhos

Tactical Kaoz

Xbox controller stand originally designed by agepbiz remixed by Tactical Kaoz. Crafted for those who appreciate both form and function. This stand features a distinctive textured design at the forefront, available in four unique styles: Knitted, Vines, Rings, and Waves. Each design not only enhances the aesthetic appeal but also offers a tactile experience that sets your gaming setup apart. Ideal for gamers looking to add a personal touch to their space, these stands merge creativity with practicality, ensuring your controller is displayed in style and always within reach

Xbox Controller Stand Remixed with textures

Xbox

vasos

mateibocancios

Ironman - Headset Stand / Holder

bustos 

pbbence1994

My next kit card is based on a Red Bull Air Race MXS-R plane. Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit togedhter tightly, but you can always use a bit of super glue to secure the parts together. Stay tuned for more Air Race planes! The pylon display will be also available to download soon check out my profile. Have fun printing it!

Air Race plane kit card (MXS-R Breitling)

kit card

agepbiz

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=jj3vnPYccS4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jj3vnPYccS4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;Printsettings: No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer height

Minimalistic Xbox Controller Stand

SUPORTE DE CONTROLE

Clippy923

The model as is, has some play in it. Some have found success scaling the inside of the model 101%.

SD Card Holder

arquivos legais

chiz_m

<h3>The most effective, ergonomic and easy-to-use PTFE release tool for the A1 – the EZ A1 PTFE Release Tool!</h3>*** For best results, please see Tips for Success section ***<h3>If you find that this tools works great for you, pls hit that BOOST button!</h3><h3>PROBLEM</h3>PTFE tubes on the A1 AMS Lite hub is difficult to remove. Per the Bambu wiki, one has to press down the locking ring with a tweezer in order to remove the PTFE tube. I find it too fiddly and I&#39;m afraid that constantly doing so will eventually cause the gantry to sag and affect alignment.<h3>SOLUTION</h3>Design an ergonomic tool that will allow easy release of the tube without pressing the entire hub down using only one hand while allowing the other hand free to pull the PTFE tube.<h3>FEATURES</h3><ul><li>Stable and efficient - less prone to errors as tool attaches to the hub preventing accidental sliding</li><li>Easy to use - Designed with the best user experience in mind! Operate the tool comfortably and naturally by squeezing the thumb and index fingers together</li><li>Less damaging to the printer - during operation of the tool, stress is limited to the filament hub only and not to the entire gantry</li></ul><h3>PRINTING DIRECTIONS</h3><ul><li>Choose between the default profile (better print quality) or the vertically-oriented profile (recommended for smoother operation) which makes the layers on the thumb press perpendicular to the layers of the clamp part which allows for smoother sliding action.</li><li>Use rigid filaments such as regular PLA, PLA+, ASA, ABS, etc. DO NOT USE matte or silk PLA as these filaments are soft and do not provide strong layer adhesion.</li><li>Print as oriented.</li><li>Comes with built-in supports. No need to turn on supports.</li></ul><h3>TIPS FOR SUCCESS</h3><ol><li>If you find the tubes still very hard to pull out, try pressing the tube down slightly to allow the metal locking teeth to release before pulling the tube out.</li><li>Make sure that you have the thumb press aligned in the corner and that it&#39;s pressing only one ring at a time. Otherwise, if it&#39;s hitting other rings, you might not be pressing the ring down enough.</li></ol><h3>HOW TO USE</h3>IMPORTANT: Tool is not meant to be permanently attached to the printhead as it will prevent filament tangle detection to work. Remove the tool after use.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392785/design/2024-04-27_283930b7afd63.png"></figure><h3> </h3>

EZ A1 PTFE Release/Remover Tool

melhorias bambu a1 mini

nicodeimos

Ring hole: 4.8mm.Model size: 31mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of The Pokémon Company and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Pokemon Psyduck keychain

articulados legais

Ring hole: 4.8mm.Model size: 32mm x 42mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario Thwomp keychain

chaveiros variados

Ring hole: 4.8mm.Model size: 47mm x 19mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Disney and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Star Wars logo keychain

chaveiros star wars

Ring hole: 4.8mm.Model size: 33mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario mushroom keychain

chaveiros nintendo

Ring hole: 4.8mm.Model size: 46.5mm x 23mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nike and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Shoes Nike Air Jordan 1 keychain

chaveiros tenis

Ring hole: 4.8mm.Model size: 42mm x 30mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of The Rolling Stones and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Bands The Rolling Stones logo keychain

chaveiros banda

Ring hole: 4.8mm.Model size: 37mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.