3DRay

Rangebear

Christmas 3D Benchy to make your day. Colour it as you like. I suggest to use Arachne engine. Will update real picture, when its done printing hah :)&nbsp;

Christmas Benchy to make your day

X-mas

IndomReps

Ryobi One+ Battery and Tool mounts&nbsp;I mainly designed these for the battery mounts which work really well and developed some mounts for the tools as well. Unfortunately due to Ryobi's tool design making something that was universal for their whole tool ecosystem isn't easy but came up with a few options that will work for some tools.&nbsp;All models use #8 screws for mounting them into whatever material you want.&nbsp;Print Settings & Material:for these functional parts I typically use atleast 5 perimeter walls and 30% or higher infill depending on your preferred pattern. The .3mf project file has the prints loaded and orientated how I would recommend printing them for appearance and strength. The battery mount and the underhung tool mount are fine to be printed in Pro PLA or even regular PLA as ABS and PETG are probably overkill for that part. The tool mounts however especially the flat and angled one should be printed in either Pro PLA or ABS.&nbsp;Model Specific Info:&nbsp;Battery Mount:Everything is pretty straight forward for this model, just decide if you want to add supports for the locking tabs. Fits the 18v One+ batteries&nbsp;Angled Tool Mount:Confirmed this works for the drill tool and will probably work for other tools that are similar. The 3mf file has this part orientated how I would print it. Requires a decent amount of support material to be used and the underside isn't super pretty looking, but the part is much stronger when printed in this orientation.&nbsp;Flat Tool Mount:Confirmed this works for the drill tool and will probably work for other tools that are similar. .3mf file doesn't have the most ideal orientation for strength but a lot more reliable to print. You can try to print in a similar orientation as the angled mount just make sure your settings and bed adhesion are on point.&nbsp;Underhung Mount:The underhung mount is to be mounted on the underside of any surface like a workbench or cabinet and the battery end of the tool slides into it like its a shoe. Its a more universal option but you are limited in how you attach the mount. Print it in the orientation of the .3mf file and no supports are needed.

Ryobi ONE+ Power Tool & Battery Mounts

Tool Stuff

pgastwirth

I needed a ryobi battery holder for my tool wall that I am building with the Honeycomb Wall Storage system. I couldn't find one that was super simple to print and the one I originally found and remixed, did not fit the battery well. So I designed my own in tinkercad.There is 2 sizes, one for 4ah battery and one for the 2 ah batteryThis will print with no supports and you will need to also need to print the insert-with-M3.stl from <a href="https://www.printables.com/model/152592-honeycomb-storage-wall/files" rel="nofollow">https://www.printables.com/model/152592-honeycomb-storage-wall/files</a>I printed this with PLA+ and BambuLabs x1 carbon using the strength settings. I let it print the first couple layers at normal speed and then I changed to ludacris speed with no issues. You will will need 2 m3 x 10mm screws and 2 m3 bolt for this. I am thinking of remixing it so it can print with no hardware needed, but I wanted an easy print with no supports. You might need to change the orientation of the model. &nbsp;

X-mas

Tool Stuff

Honeycomb wall stuff