needed a support/standoff at the bottom. put one on but printed with regular supports and did not turn out very well with the deep pockets. absolutely need petg/pla support interface to cleanly remove.

some loose connections but nothing glue can’t handle. printed in glow in the dark PLA and my 4 yo son loves it!

great concept, but the trianglular attachment broke so I had to reprint. overall it’s strong enough I guess but also is easier to knock the toolhead cover off during printing

transparent gradient petg. came out pretty cool. one support came right off!

works for me. could use a little refinement but stoked to find something that I didn’t need to design!

works

like this a lot. was using a random piece of plastic to prop the glass open before

took care of my mistake printing the wrong size poop shoot. probably adds airflow too. would be nice to have a groove in the bottom to put an o-ring to keep the printer from moving but it’s got 40 hours on it since and hasn’t moved on its own

should have printed the non anti vibration version for the p2s but did some risers and all ok. was also one of my first prints for the X1e at work