user_2176532007

Williams Industries

These look great on your door frame, I would suggest a little bit of adhesive putty like in the link below. This is a layered print and this is meant to be printed on a Bambu with AMS or Multicolor printer. Makes for great wall art, or you can scale it down and add a magnet on the back for a magnet.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Adhesive Putty: <a target="_blank" href="https://a.co/d/0SXex0u" rel="nofollow noopener">https://a.co/d/0SXex0u</a>

Halloween Decorations Door Art 8 Pack 

seasonal

Jorge Rui

After the release of the final version of the <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>, which breaks away from the original bamboo lab model&#39;s aesthetics as well as my previous designs, I&#39;m excited to introduce a more refined model featuring generative design. Though this version is merely inspired by automatic generation techniques, it allows for precise control of wall angles, reducing the need for extensive supports. Like the base &#34;Ergo Mouse&#34; model, this version doesn&#39;t require a flat base for printing. However, I recommend using <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">standard or galaxy PLA</a>; Matte PLA tends to have more challenging supports to remove, which can leave marks on the piece. I hope you like it :)&nbsp;Affiliated links for Bambu Lab Material if you want to help a little:<ul><li><a target="_blank" href="https://shrsl.com/4k6e8" rel="nofollow noopener">Galaxy PLA</a></li><li>PLA CF</li><li><a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Normal PLA</a></li></ul>and part of the success on getting the mouse without that flat bottom, and almost without any support scars is the use of Gold PEI build plate, this plate, don&#39;t know why, has a stronger grip when compared to the black one, and they have it for all printers.<ul><li><a target="_blank" href="https://shrsl.com/4jqpm" rel="nofollow noopener">Gold PEI Plate</a> </li></ul>&nbsp;You can get more information on the parent project <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>,Like the parent project, this mouse uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 49.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-30_36c3c434cfc4d.png"></figure><h2><a target="_blank" href="https://youtu.be/9TkudRs2iG8" rel="nofollow noopener">Video do assemble the Bambu Lab Wireless Mouse kit with this “skin”</a></h2><blockquote>A Message to you:Hello! I trust everyone is in good spirits.  I&#39;m contacting you because I&#39;m encountered increasing difficulties displaying my work on Facebook and, more so, on Reddit. Although I&#39;m utilizing this platform and others, I&#39;m seeking alternative methods to show my work.  A <a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">community member</a> (<a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">Kardes.Design</a>) suggested an abominations called &#34;TikTok&#34;, which I admit I&#39;ve previously attempted with limited success.  Nevertheless, I&#39;m willing to try again to share my development journey and updates. For TikTok users, you can find me at: <a href="www.tiktok.com/@designrepcom" rel="nofollow">www.tiktok.com/@designrepcom</a>.  Your support in sharing would be greatly valued. <a target="_blank" href="https://www.tiktok.com/@designrepcom/video/7375077366575516961?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7374868727643145761" rel="nofollow noopener">And here a tiny clip for this project</a></blockquote><h2> </h2><h2>Context</h2>This mouse has been constructed in a completely different manner from previous versions, with a particular focus on functional and ergonomic aspects. Think of it as a study rather than the final product. Nevertheless, I have decided to release it for those interested in experimenting. What to expect:<ul><li>Optimal comfort level for a hand size within the 90th percentile, which includes most adult male hands.</li><li>Perfect button actuation. Given the button layout in this kit, as well as the limitations imposed by 3D printing, this will be the most suitable key configuration and should work with most printing configurations.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_ad7df10e8eacf.png"><figcaption>A little bit of the design process - Prototype creation (2th iteration on the make)</figcaption></figure><ul><li>I have included a version with specific material for support. Especially for those with an AMS system, this is one of the materials that should always be loaded.<ul><li>It is true that it is somewhat expensive, but if used only on the interface layer, this material will allow for many prints, as only a small amount is used on the contact zone. The advantage is an almost perfect interface zone. Bambu Lab currently offers &#34;<a target="_blank" href="https://shrsl.com/4ctb1" rel="nofollow noopener">Support for PLA</a>,&#34; which is a relatively elastic material with very low adhesion to the piece&#39;s walls. <a target="_blank" href="https://shrsl.com/4jh25" rel="nofollow noopener">PVA</a>, which is water-soluble, can also be used and allows for even superior results. Both are excellent options. The downside is that the printing will take much longer to complete, and the purging effect will consume some of the precious support material.</li></ul></li></ul><blockquote>You can also try using PETG as a support material. Since the melting temperatures of the two materials are similar, they are incompatible (they don&#39;t &#34;fuse&#34; together), which is beneficial for support structures. However, PVA or the specific support material allows for superior results, and in terms of configurations, everything is automated in Bambu Studio.</blockquote>&nbsp;This uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 326.094px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-25_94087291ff26c.png"></figure>&nbsp;This was the 1st study, so I will not be making the usual render images this time. Instead, I will share the print to show how clean it comes out. Still available to print, see instruction on the bottom (Ergo Mouse I1.3mf). <figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_8cd86a130ffdf.png"></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_de1638e12ebd6.png"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_111ea882c522d.png"></figure><blockquote>And since these things don&#39;t come out of nowhere, there is a whole development process needed to make everything go smoothly. Contrary to popular belief, it’s not enough to just know how to use a 3D modeling tool and slicing software; these are just tools in an industrial design process, which is itself part of product design. And you know what? It&#39;s something everyone should try. Simply printing pieces that others have made is just one part of the experience, a small part, not bad, but only a fraction of the experience, if you like to print you should try create something.So, I invite everyone to give it a try. Start by taking the first step: create a simple model using the CAD tool of your choice, or make a clay sculpture, or a model of what you want (I often start with these). What matters is to begin. You already have one thing mastered: printing. Now, just take one more step to become a creator.Jorge Rui</blockquote>&nbsp;

Ergo Mouse - Snake edition

mouse

Pork3D

Meet the Adah Container Flask, a stylish and versatile storage solution for all your essentials! This plastic flask features a unique geometric exterior pattern, adding a touch of modern flair to your daily routine. Our Adah Container Flask is designed to keep your belongings organised and within reach. It&#39;s great for storing a variety of items such as:<ul><li>Office supplies</li><li>Art materials</li><li>Travel accessories</li><li>Random Small Items</li><li>Or use it as a vase</li></ul>&nbsp;Printing No supports needed

Adah Container Flask by Pork3D.com

plant pots, vases and boxes

jaayjeee

Hi everyone!&nbsp;My wife had all her Crochet stuff “sorted” in a plastic container and it was a mess, So I designed this for her&nbsp;She likes mushrooms so I put that on top too&nbsp;<ul><li>The Whole box is 169mm x 169mm x 37mm (6.6" x 6.6" x 1.4")</li><li>The Inner Tray is 103mm x 164mm x 16mm (4" x 6.4" x 0.6")</li><li>There are 13 Slots inside for varying sizes of Crochet Hooks</li><li>Included are some printable spacers for shorter hooks to keep them neat</li><li>The top end is indented to make it easy to remove the hooks if you have larger fingers</li></ul>It has a pretty tight fitting lid by design, but you can loosen it up with a bit of sanding if you like&nbsp;Before:<img src="https://makerworld.bblmw.com/makerworld/draft/533061/2024-02-14_953ece7ec9384.jpg">After:<img src="https://makerworld.bblmw.com/makerworld/draft/533061/2024-02-14_68d93be3b4353.jpg">&nbsp;All of my projects are 100% Free. However if you'd like to support me, feel free to buy me a coffee<a target="_blank" href="https://www.buymeacoffee.com/jaayjeee" rel="nofollow noopener">Buy Me A Coffee</a>

Crochet Sorting Box with Mushroom

for mum

GSPERY

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #11 (0.96mm) swap to Blue At layer #17 (1.44mm) swap to White for the rest. If you resize the model, do so only on the X and Y axis.

Deep Danger (HueForge)

pics hueforge etc

Codyinbody3

Here&#39;s the first of my new batch of uploads. I&#39;ve been taking some time off from designing Makerworld lamps to catch up on orders and even though I&#39;m not fully caught up, I wanted to add several new lamps. Enjoy!&nbsp;Settings: The print profile settings are setup specifically for the frontplate only so you won&#39;t have wisps or colors bleed into each other or have those random dots of a darker color that you can only see when you get a light behind it. These are the best settings I&#39;ve found to take care of that out of the 1000s of lamps I&#39;ve printed. When going to print the backplate, be sure to change the filament settings. You&#39;ll want to change the first layer and other layers temps back to 220 on both. Then you can choose to take off retraction and zhop but it won&#39;t mess with the quality either way.

Brian Griffin Family Guy LED Lamp

lightboxes

Print_Roma_3D

The most iconic Rock pattern of the twentieth century the ZEPPELIN LEDs in a keychain to print in a flash, like always having your favorites in your pocket.La formazione Rock più iconico del xx secolo i LED ZEPPELIN in un portachiavi da stampare in un lampo, come avere sempre in tasca i vostri beniamini.

Keychain LED ZEPPELIN

guitar

sharpie00

<h3>Game Console Placards - Volume 1</h3>Add a touch of nostalgia to your gaming setup with these 3D printable console placards! Perfect for retro gamers, each placard represents a beloved video game brand or console, making them ideal decorations for your walls or desks.<h4>Specifications:</h4><ul><li>Dimensions: 9.76 inches (L) x 3.03 inches (W) x 0.79 inches (H)</li><li>Colors: Each placard has been intricately colored in Bambu Studio and is ready to print.</li><li>Material: Designed with official Bambu Lab PLA filament, but feel free to use your preferred brand of filament.</li></ul><h4>Mounting:</h4>These placards can be easily mounted on your wall using the smallest size of 3M Command Strips, ensuring a clean and damage-free setup.<h4>What&#39;s Next:</h4>Volume 2 of this collection will be released on Sunday, June 9, 2024, where more iconic console placards will be released!  <h4>Show Your Support:</h4>If you enjoyed printing and displaying these placards as much as I enjoyed creating them, I&#39;d appreciate a Boost from you. Your support encourages me to continue creating and sharing more designs.

Game Console Placards - Volume 1

gaming

David

2 Versions of a Clipper Display.The Clipper should fit exactly, without force, inside the displaystand.&nbsp;2 Versionen eines Clipper Halters.Das Clipper sollte genau, ohne großen Kraftaufwand, in den Halter passen.&nbsp;

Clipper Display

bongs and shit

rowiac

A coaster with a logo of Black Sabbath, 100mm x 100mm x 5mm. This is designed to be printed face down in three colors using an AMS.

Black Sabbath Coaster

sabbath

3D Prints This Week

Load Green, Black, and White into the ams.&nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Funny Coaster KFC / THC / Parody / Drink holder

stuff

KG3Dee

Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>Please use designer print profiles as these are the only ones that are always up to date.&nbsp;Also, check out this in an <a target="_blank" href="https://makerworld.com/en/models/396440#profileId-297756" rel="nofollow noopener">AAA version</a> and the <a target="_blank" href="https://makerworld.com/en/models/198851#profileId-219450" rel="nofollow noopener">AAA Mechanical Battery Dispenser Slide</a>.&nbsp;Printed model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul><li>Main parts. 0.2mm layer height:<ul><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.&nbsp;1.<ul><li>Insert the lever in the casing. There is a slotted hole in the casing which needs to line up with the lever pin. Push to insert, and rotate multiple times both ways until the rotation is more or less friction free.</li><li>Repeat steps above for the other side.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_39cb8ba348c5c.png"></figure><figure class="image image_resized" style="width:16.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-16_696d5b597a4e5.gif"></figure>&nbsp;2.<ul><li>Insert the inner stoppers on both casings, protruding inside the lever groove, and insert the mid plate. The plate will keep the stoppers locked in place.</li><li>Do the same for the front stoppers, and insert the front plate.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_5da3f8c4a6d3c.png"></figure>3.<ul><li>Insert the handle. Check that the handle can move freely up and down.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_03b3c1c458c53.png"></figure>4.<ul><li>Insert the springs. They should be inserted as shown in the pictures, with the pin at the lowest point.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_28498c0d0830b.png"></figure><ul><li>Tension the springs and put the pin in the lever.</li><li>Insert the lower stiffener (Top in below picture).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7320db61e4d09.png"></figure><ul><li>Insert spring guides as shown. The flat one is friction fit into the cut-outs on the mid plate. The spring center one is dove-tailed.</li><li>Check the handle movement after this step, make sure it moves to its end (top) position by itself.</li></ul>5.<ul><li>Check the quality of the threaded bolt.</li><li>Use the printed tool to hold the leveling knob. Rest the bolt against a table and carefully, with no excessive force, turn the screw while holding the tool until it snaps free. Once free there should be minimal play in the axial direction. Do this for all knobs. If the knob is stuck, try the 0.2mm tolerance version.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_411dce1e012b4.png"></figure><ul><li>Trial fit the knob bolts in the guide rail threads. There might be some initial friction here, so enter the threads and turn a few degrees, then back again, then gradually increasing the turn for each go back and forth until the thread is completely set. Be patient here, don't use excessive force.</li></ul>6.<ul><li>Push in the leveling knobs in the casing. There is a slot in the knob and in the casing that should match up.</li><li>Use the printed tool, and twist the knob clock-wise until it sets. No need to overtighten. For the lower one you have to push the handle down to gain access.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-03-17_5afc523ed3444.png"></figure><ul><li>Insert the guiderail on the opposite side of the casing, and screw in the bolts. Do a couple of turns for all, then go back and gradually tighten in multiple goes until all bolts are seated. The guiderail and its position is what keeps the batteries rolling smoothly down when loading the dispenser. Too wide and the batteries will fly out, too narrow and the batteries will jam.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7ac74cca77c45.png"></figure>7.<ul><li>Final step is to install the last 2 stiffeners.</li></ul>&nbsp;Width adjustment:<ul><li>To widen the gap, turn the bolt clock-wise.</li><li>To narrow the gap, turn the bolt counter-clock-wise.</li><li>Start by turning all the bolts on full turn counter-clock-wise.</li><li>Grab your battery and insert it in the dispenser and hold it in front of the leveling knob. Adjust the knob so there is minimal play in the battery's axial direction. Continue this for all knobs.</li><li>Once done, release the battery from the top and observe its rolling down the slide. Adjust where necessary and your done.</li></ul>&nbsp;&nbsp;I advice using the original (designer) profiles, as these always have the latest changes incorporated.&nbsp;Would appreciate some feedback if this dispenser works with your batteries, or if you have any issues.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

AA Mechanical Battery Dispenser

functional

ManuZiloop

Here is my new model that allows the evacuation of filament waste through a small slide and sends it towards the trash.&nbsp;Some users ask me a version with magnets, I will do it soon.&nbsp;*** If you like my design, please give it a “BOOST” (click on the button) ***