user_2176260868

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Containers/Boxes

ngprint

Metric M8 Screws/Bolts/Nuts/Washers&nbsp;These models are optimized for FDM 3D printing and should fit without the need for rescaling.No supports needed if you print them standing.They are still compatible with standard metal bolts/nuts.For better strength, try printing them with a few more wall lines.Smaller layer heights result in better threads.&nbsp;DIN 933 Hexagon head screwsDIN 934 NutDIN 1587 Cap NutDIN 315 Wing NutDIN 125 WasherDIN 9021 Washer&nbsp;Other sizes:<a target="_blank" href="https://makerworld.com/en/models/378318" rel="nofollow noopener">M6</a><a target="_blank" href="https://makerworld.com/en/models/378447" rel="nofollow noopener">M10</a><a target="_blank" href="https://makerworld.com/en/models/378461" rel="nofollow noopener">M12</a>&nbsp;Recommended Print settings:-PLA/PETG/ABS/PA/PC depending on the use case-0,16mm layer height or smaller-minimum 4 wall lines-4 top an bottom layers-30% Infill&nbsp;

Ultimate Bolts, Screws, Nuts, and Washers Set M8

Hardware/Fixings

Chavy

Curved Cable Clip

Electrical

DownTheShed

A wall clamp to hold 20mm pipe close to the wall. It can be printed with snug supports on its side.

20mm water pipe wall clamp

Pipe/Conduit

LukeOsPrinting

Does the key still not have a proper place and is always somewhere else, just when you need it? The holder stores the key on a wall, in a niche or on the door to save space. With this holder, the key is always in its place and quickly accessible. Even if the key is hanging on a key ring, it fits perfectly in the holder.The holder with the flat back can be easily mounted on a wall using Velcro or adhesive pads.The key holder is suitable for keys with the part number: Fiat-KS-13 Fiat-SH-15ADimensions: 35mm x 30mm x 20mm

Key Holder - Fiat Ducato | Citroen Jumper | Peugeot Boxer

Caravan

Hugo

<h2>Update : I added the money clip There is now a version with and without money clip in the back.</h2>&nbsp;This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>Here are the key updates:<ol><li>The new version can accommodate 6 cards, compared to 5 in the previous iteration.</li><li>The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.</li><li>The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.</li></ol>This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.I have not yet designed a money clip for the back, but it will be included in a future update.<h3>Printing :</h3><ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3>Freeing the mechanism :</h3>Force on the slider to crack it open :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/20240310_165015.jpg#%7B%22uuid%22%3A%226fac39e0-5c87-4b27-a4d5-f723c113ad5e%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>If it is not enough, you can push the pivot on the back :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/20240310_165005.jpg#%7B%22uuid%22%3A%225b8ad44e-f5c1-49dc-be6b-8d84b6ee539c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>Enjoy :)

Cascade card wallet V2

Boofy

maCyo42

Featured Remixes/Mods<figure class="table" style="width:98.41%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="border:2px solid hsl(0, 0%, 0%);">Is your Lithophane to bright? Check out my Solution and <a target="_blank" href="https://makerworld.com/de/models/71507#profileId-75717" rel="nofollow noopener">Brightness Controller Case</a></td><td style="border:2px solid hsl(0, 0%, 0%);"><figure class="image image_resized" style="width:36.32%;"><a href="https://makerworld.com/de/models/71507#profileId-75717" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/264443/2023-11-23_6659a5b6f2561.png"></a></figure></td></tr></tbody></table></figure>This is an optimized Version of Bambu Labs Lithophane Frame.<ul><li>Closed Frame</li><li>wider Angle for the Hinge</li><li>less Material about 103gr</li><li>on a minimum reduced Support Structure</li><li>Hinge is removable to replace it e.g. with a wall hook</li><li>closing mechanism</li><li>many small improvements</li></ul>NEW v2 Online<ul><li>shorter Pins lower risk of breakage</li></ul>NEW v2 - "long Bottom" Online<ul><li>features of v2</li><li>+ 8mm higher Frame - extension under the bottom for wider angles of the Frame</li></ul><figure class="table" style="width:98.39%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:88.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/264443/2023-12-13_f9a8a8bfcf142.jpg"></figure></td><td><figure class="image image_resized" style="width:91.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/264443/2023-12-13_a2d8a93574815.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;Instructions Lithophane: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions</a> Bambu Store Links PLA CMYK Lithophane Bundle: <a target="_blank" href="https://eu.store.bambulab.com/products/pla-cmyk-lithophane" rel="nofollow noopener">https://eu.store.bambulab.com/products/pla-cmyk-lithophane</a> Bambu CMYK LED Backlight Board: <a target="_blank" href="https://eu.store.bambulab.com/products/bambu-cmyk-backlight-board?variant=46880852935004" rel="nofollow noopener">https://eu.store.bambulab.com/products/bambu-cmyk-backlight-board?variant=46880852935004</a>&nbsp;RELEASED 20231213Issue: Oftentimes reported broken Pins I try to reduce the broken Pins by reducing the length. If the Test is good theres an update this evening (20231213). Second issue is reducing the thickness of the clamps on the back to also reduce the broken ones. And i plan to release a second bottom Part to increase the height of the Frame to make a larger angle possible because of long usb c Cables. Stay tuned

Optimized Litho Frame for Bambu CMYK LED Backlight Board - Lithophane

Lithophane shit

@H_N

Print using materials of two colors. The printing size can be enlarged or reduced according to personal needs. I use a mini printer, so the configured file size is relatively small.！！！https://makerworld.com/zh/models/206599#profileId-226729！！！！！

Cool pit bull ornaments

Larni

KO Additive Labo

handle cover print hub3 color

handle cover print hub

Bambu upgrades

apex_3d

This is an IKEA-style kitchen door handle made for 96, 128, 160 mm hole spacing. Please measure you hole spacing before printing this.4mm wood screw should be used with it.It looks very nice with textured PEI surface and matte PLA, your guests will never know you printed these.

Ultimate Modern Kitchen Handles IKEA-style 96mm, 128mm, 160mm 

House/General

Elliott_

Customizable Hose Adapters with <a target="_blank" href="https://cad.onshape.com/documents/daa108770c30894cd72e531a/w/878fc491a42785d82498cb55/e/064565d4cb42445a2508380c?renderMode=0&uiState=65d98ad388897e5e82505ac5" rel="nofollow noopener">OnShape</a>.

Hose Adapters

Hose/Retic/Aquaponics

laisch

Primary I designed this Hexagon tile set to hide my cables from the TV. So there is plenty of space for cable management behind the tiles. There are four eyelets on each base plate for using zipties.Since the Tiles are featureing magnets to snap onto the base plate, they can easyly be removed or replaced for further upgrades and changes.&nbsp;<h3>Changelog:</h3><blockquote>Update 24.02.2024Added Half and Quater Tiles including Base in various heights  Update 10.03.2024 Add 15mm Tile for an "ESP32-2432S028R" - display (CYD)</blockquote>&nbsp;<h3>Features:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-25_37de1246fe4298.jpg"></figure><h3>Parts and Sizes:</h3><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_lv79h61gd69w.jpg"></figure></td><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_4twwg1nxuqfh.jpg"></figure></td></tr></tbody></table></figure>The general Tile size is 175 x 202mmThe heights can go from 20mm up to 55mm in 5mm increments depending on the choosen base plate and tile size.Parts:<ul><li>Base Plate (10mm / 20mm)</li><li>Base Plate - Half (10mm / 20mm)</li><li>Base Plate - Quater (10mm / 20mm)</li><li>Outside LED (Base + 25mm height)</li><li>Outside LED (Base + 35mm height)</li><li>LED Clock Tile (Base + 25mm height)</li><li>CYD - Display Tile (Base + 15mm height)</li><li>Cable Outlet (Base + 20mm heignt)</li><li>Standard Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Half Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Quater Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Bowties for connecting the Base Plates (tight or loose fit - version, depending on your filament settings)</li></ul>&nbsp;<h3>Preparing the Project</h3>Before you start this project you should make a Sketch how you want the tiles to be orientated on the Wall. The file of the "Base Plates" consists of 7 individual parts where 6 of them can be removed individually for defining how the cables should run and how the base plates are connected to each other.If you miss this step and print the base plate without removing the connection sides, you have no openings for the bow ties to connect each tile to another and alighning them will be much more difficult.Using Bambu Studio for customization:<figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_lslj0l044c4g.jpg"></figure>Right Click on the base plate > split > to parts</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_w6036cdssgaa.jpg"></figure>Switch to the “Object” Tab and remove the unwanted parts</td></tr></tbody></table></figure>The LED Tiles can also be splitted apart for easy coloring.&nbsp;<h3>External Hardware</h3><ul><li>Magnets D: 6mm, H: 3mm (6-12 per tile)</li><li>10mm wide LED Stripe of your choice (I used WS2812b)</li><li>Clock mechanism with 12mm long shaft (only if you want to make the clock tile)</li><li>mounting screws</li></ul>&nbsp;<h3>Used Filament</h3><ul><li>PLA - Black (for Base and Tiles)</li><li>PLA - White (for the diffusor part of the Tiles)</li></ul><h3>Printing</h3>For best looking Result the tiles should be printed on a textured PEI - plate.&nbsp;<h3>Installation</h3><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_v1legy4d1w1l.jpg"></figure>The hole for the magnet is a tight fit, I used a hammer and a pin to put them into place.  Be aware of the magnet orientation. They should all be in the same orientation so you are able to switch tiles! If your fit is more on the loose side (different filament / settings) then you should add little superglue before pressing them into the hole.On the Cover plates be more careful when using the hammer.</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_3j9vx6gxpi77.jpg"></figure>The bowties can pressfit into place</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_71wh5qrhupmz.jpg"></figure>Screw the Base Plates into the wall</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_9zfawcajua07.jpg"></figure>Install the LED stripes into the LED Tiles</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_q1wwhedkgpo4.jpg"></figure>Install the Tiles and do the cable management</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_s8ejkpb7gn4r.jpg"></figure>Have Fun!</td></tr></tbody></table></figure>&nbsp;&nbsp;

Hexatiles - Hexagon LED Wall tiles

Home cinema

Bedlam Threadz

John wasn't the boogeyman. He was the one you sent to kill the f***ing boogeyman. This is a Hueforge filament painting using only 4 basic colors. The frame for all of my, and probably the vast majority of 200x200 prints, is <a target="_blank" href="https://makerworld.com/en/models/56304#profileId-57896" rel="nofollow noopener">HERE</a>.*&nbsp;This is a 4 color print that can easily be done by people with or without AMS units. If you have an A1 mini or any other printer with a bed smaller than the capacity to print 200x200 you can use the slicer to scale the model in the correct profile for your multi color setup just make sure NOT TO SCALE THE Z dimension. If you substitute filaments results will vary. This model is for personal use only. *&nbsp;IMPORTANT: READ BEFORE PRINTING*&nbsp;I have uploaded two 3MF profiles. One for people with an AMS and one for people with NO AMS.*&nbsp;To print with 1 AMS units all you need to do is load the colors in order and print.*&nbsp;To print with NO AMS unit you just need to do manual filaments swaps every color. The 3MF is set to pause at the correct layer heights. At each pause load the next filament color in order by following your unload/load procedure for your particular printer, then hit resume. Repeat until complete. This will be once per color over the entire painting. You have a decent amount of time between swaps.*&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. There are some recommended speed changes in my 3MF files and a layer height modifier to print the first 0.64 mm @ 0.16 mm layer height to speed up the print as there is no blending on those layers. If you print the STL set your layer height modifier after you have set your color swaps/pauses as it changes the total amount of layers once sliced.*&nbsp;Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3.1 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 4.4*Swap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Blue Gray At layer #15 (1.28mm) swap to Ash Gray At layer #19 (1.6mm) swap to Ivory White for the rest.

John Wick - Hueforge - FIlament Painting

HF Art

Byrd Anthony

As I continue to learn Fusion360 and design more things, I kept wanting to tackle the infamous “junk drawer” in the kitchen.&nbsp;Nothing drives me more crazy than the ziplock / snack bags that come in a cardboard box and do not fit in the drawers. Every time I would open or close the door, they would jam up or get more ripped.&nbsp;Plus, with starting the gridfinity project for organization, it just did not look right.&nbsp;So I worked on designing a ziplock bag holder, that was simplistic, but had a secure lid. I wanted the lid to stay on when opening and closing the door and taking out a bag but be easy enough to remove for refilling the bags up.&nbsp;This is my first attempt at designing something with a lid and magnets, so hopefully you all enjoy.&nbsp;Magnets used are 6x2mm magnets:&nbsp;<a target="_blank" href="https://www.amazon.com/260Pcs-Refrigerator-Magnets-Fridge-Whiteboard/dp/B07XRQ44VC/ref=sxin_14_pa_sp_search_thematic_sspa?content-id=amzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5%3Aamzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5&crid=16SM8BUAUUSAK&cv_ct_cx=6x2%2Bmm%2Bmagnets&keywords=6x2%2Bmm%2Bmagnets&pd_rd_i=B07XRQ44VC&pd_rd_r=73459101-e2b3-479a-891a-be1d8b476c0c&pd_rd_w=oYJlo&pd_rd_wg=C7Ptz&pf_rd_p=432a6361-82bd-4986-a20f-2d4d577f5af5&pf_rd_r=9930GADJGK5E3VR0SZH9&qid=1706363364&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=6x2%2Bmm%2Bmagnets%2Caps%2C72&sr=1-1-3f7eb011-4703-48ad-8058-43dbff1e6b87-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1" rel="nofollow noopener">Amazon.com: VNDUEEY 300Pcs Refrigerator Magnets, Small Magnets, Fridge Magnets, Whiteboard Magnets, Tiny Magnets, Round Magnets, Mini Magnets for Crafts, Miniatures, Nails, Office, Kitchen : Industrial & Scientific</a>&nbsp;Any feedback is always welcome!

Gridfinity Ziplock Bag Holder

Gridfinity-Kitchen

teh_chaosjester

Like me, you probably have ended up with a bunch of M2-M5 screw packs that need a home. Why not give them one?&nbsp;These 2x3 Gridfinity bins are for M2 to M5 screws that usually come in packs with some nuts, and lengths from 6MM to 20MM. &nbsp;The text is cut out and can be printed in multicolour to make them stand out a bit more.

Gridfinity M2, M3, M4 and M5 Screw and Heated Insert Holders

Gridfinity-Shed

select2start Print

Gridfinity Base | Skelet | 5x5 | select2stertPrint

Gridfinity-General

Phenix

German version below.&nbsp;Also check my new corner clip version: <a target="_blank" href="https://makerworld.com/de/models/128146#profileId-138680" rel="nofollow noopener">https://makerworld.com/de/models/128146#profileId-138680</a>&nbsp;I created some printable labels for Ikea Kallax boxes (Dröna). The plate can be slided into the clip and removed by hand or a gap on the left hand side if too tight. If not fitting you can scale the label, alternatively you can remove a little bit of the label edges with a hand deburrer. Better do a test print before series production, but should be fine for a Bambu printer :)&nbsp;Print instruction:Labels should be printed with 0.2 mm layer height. Take care of the orientation, the whide side should be faced down. Without AMS it should be possible to print single color logos with only one manual color swap, but i did not try that.The clip prints without support. I made a normal version, easy to remove and a tight version to prevent kids removing the clip easily.&nbsp;I prepared these logos (see pictures):Folders, filament spools, terminal bricks, car, train, pencil, wood building blocks, book, tools, gamepad, cloths, Snacks, baby, sport, medicine, kitchenware and Pillow/Blanket and bambu logo.&nbsp;Update 02.02.2024: added Teddy, makeup, tooth brush, music, jewelery, camera/photo, decoration/plant, shoes, cables, board games, movies, handbag&nbsp;For additional labels just ask or create your own, its quite simpel.<ol><li>Download an SVG Icon (Color doesnt matter) (e.g. from https://www.iconfinder.com)</li><li>Add SVG like any other STL file into bambu studio</li><li>Use uniform scale to scale Y to maximum 16 mm, for wide objects maximum 35 mm in X</li><li>Disable uniform scale and set Z to 0,2 mm</li><li>Color the SVG (best with object menue, all or just parts of it if available)</li><li>Right click to center the SVG</li><li>Right click to center the empty sign</li><li>Mark the empty sign and all parts of the SVG and use “Assemble” by right click</li><li>Ensure that the sequence of the assembly is correct. “kallaxBoxLabels_Label.STL" has to be in first position, else the icon will not be shown after slicing</li><li>Slice the sign to check if it shows up like expected</li></ol>Thats it!&nbsp;Possible problems:<ul><li>too thin lines will not be shown</li></ul>&nbsp;****** GERMAN ******Jetzt auch als Corner Clip: <a target="_blank" href="https://makerworld.com/de/models/128146#profileId-138680" rel="nofollow noopener">https://makerworld.com/de/models/128146#profileId-138680</a>&nbsp;Ich habe druckbare Schilder inklusive Halterung für Ikea Kallax Boxen (Dröna) entworfen. Die Label können von rechts in den Clip geschoben werden und falls zu fest sitzend mit einem Schraubenzieher von links wieder entfernt werden. Ich empfehle erstmal ein leeres Label zu drucken um den Sitz zu prüfen, sollte aber für Bambu Drucker passen. Alternativ kann man auch mit einem Hand Entgrater die Kanten des Labels einmal leicht abziehen.&nbsp;Druck Einstellungen:Die Label sollen mit 0,2 mm (oder weniger) Schichthöhe gedruckt werden. Aufpassen bei der Orientierung, die breitere Seite sollte nach unten zeigen. Vermutlich ist es ohne AMS möglich mit einem manuellen Filament Wechsel einfarbige Logos zu drucken aber das hab ich nicht getestet.Der Clip kann ohne Support gedruckt werden. Ich habe eine normale Version, welche einfach zu entfernen ist und einen fester sitzenden um zu verhindern dass er von Kindern sofort entfernt wird.&nbsp;Verfügbare Logos (siehe Bilder):Ordner, Filament Spulen, Klemmbausteine, Auto, Zug, Stift, Holzbausteine, Buch, Werkzeug, Gamepad, Kleidung, Snacks, Baby, Sport, Medizin, Geschirr und Kissen/Bettdecke und natürlich ein Bambu Lab Logo&nbsp;Update 02.01.2024: Teddy, Makeup, Zahnbürste, Musik, Schmuk, Kamera/Foto, Dekoration/Pflanze, Schuhe, Kabel, Brettspiele, Filme, Handtaschen hinzugefügt&nbsp;Für weitere Labels einfach melden oder selbst eins entwerfen, geht ziemlich einfach:<ol><li>SVG Icon runterladen (Farbe spielt keine Rolle) (z.B. von https://www.iconfinder.com)</li><li>SVG über hinzufügen in Bambu Studio einfügen, genauso wie mit jeder STL</li><li>Mit “einheitliche Skala” so skalieren dass Y maximal 16 mm groß ist, bei breiten Icons darf X 35 mm nicht überschreiten</li><li>Jetzt “einheitliche Skala” deaktivieren und Z auf 0,2 mm skalieren</li><li>Am besten über das “Objekte” Menü das Icon einfärben</li><li>Rechtsklick auf das SVG für “Mitte” um das Objekt zu zentrieren</li><li>Rechtsklick auf das leere Label “Mitte” um das Objekt zu zentrieren</li><li>Leeres label und SVG markieren, dann Rechtsklick und “Zusammenbauen”</li><li>Ggf. muss die Reihenfolge des Zusammenbaus geändert werden. “kallaxBoxLabels_Label.STL” muss immer an erster Stelle stehen sonst wird beim slicen das Icon nicht angezeigt</li><li>Jetzt das Label noch slicen um sicher zu gehen dass es richtig angezeigt wird</li></ol>Das wars auch schon!&nbsp;Mögliche Probleme:<ul><li>zu feine Linien werden nicht angezeigt bzw. können nicht gedruckt werden</li></ul>

Ikea Kallax / Dröna printable labels, 30 labels available

Gridfinity-Office

Wastl85

A simple kitchen Organizer / Box for baking powder or spices for small or large bags.

Kitchen Packet Organizer / Baking Spice Box

Kitchen

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

Shed shit

maegu_

BambuLab Coasters with Box to store.

BambuLab Coasters with Box

Entertaining / Dining

哔哔叭叭蹦蹦蹦

需要：M2*6 螺丝29mm涡轮涵道电机30A电调18650电池tapeC 充电板Required:M2 * 6 screw29mm turbine duct motor30A electrical regulation18650 batteryTapeC charging motherboard

Violent handheld fan

Electronics

KG3Dee

Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>Please use designer print profiles as these are the only ones that are always up to date.&nbsp;Also, check out this in an <a target="_blank" href="https://makerworld.com/en/models/396440#profileId-297756" rel="nofollow noopener">AAA version</a> and the <a target="_blank" href="https://makerworld.com/en/models/198851#profileId-219450" rel="nofollow noopener">AAA Mechanical Battery Dispenser Slide</a>.&nbsp;Printed model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul><li>Main parts. 0.2mm layer height:<ul><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.&nbsp;1.<ul><li>Insert the lever in the casing. There is a slotted hole in the casing which needs to line up with the lever pin. Push to insert, and rotate multiple times both ways until the rotation is more or less friction free.</li><li>Repeat steps above for the other side.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_39cb8ba348c5c.png"></figure><figure class="image image_resized" style="width:16.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-16_696d5b597a4e5.gif"></figure>&nbsp;2.<ul><li>Insert the inner stoppers on both casings, protruding inside the lever groove, and insert the mid plate. The plate will keep the stoppers locked in place.</li><li>Do the same for the front stoppers, and insert the front plate.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_5da3f8c4a6d3c.png"></figure>3.<ul><li>Insert the handle. Check that the handle can move freely up and down.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_03b3c1c458c53.png"></figure>4.<ul><li>Insert the springs. They should be inserted as shown in the pictures, with the pin at the lowest point.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_28498c0d0830b.png"></figure><ul><li>Tension the springs and put the pin in the lever.</li><li>Insert the lower stiffener (Top in below picture).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7320db61e4d09.png"></figure><ul><li>Insert spring guides as shown. The flat one is friction fit into the cut-outs on the mid plate. The spring center one is dove-tailed.</li><li>Check the handle movement after this step, make sure it moves to its end (top) position by itself.</li></ul>5.<ul><li>Check the quality of the threaded bolt.</li><li>Use the printed tool to hold the leveling knob. Rest the bolt against a table and carefully, with no excessive force, turn the screw while holding the tool until it snaps free. Once free there should be minimal play in the axial direction. Do this for all knobs. If the knob is stuck, try the 0.2mm tolerance version.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_411dce1e012b4.png"></figure><ul><li>Trial fit the knob bolts in the guide rail threads. There might be some initial friction here, so enter the threads and turn a few degrees, then back again, then gradually increasing the turn for each go back and forth until the thread is completely set. Be patient here, don't use excessive force.</li></ul>6.<ul><li>Push in the leveling knobs in the casing. There is a slot in the knob and in the casing that should match up.</li><li>Use the printed tool, and twist the knob clock-wise until it sets. No need to overtighten. For the lower one you have to push the handle down to gain access.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-03-17_5afc523ed3444.png"></figure><ul><li>Insert the guiderail on the opposite side of the casing, and screw in the bolts. Do a couple of turns for all, then go back and gradually tighten in multiple goes until all bolts are seated. The guiderail and its position is what keeps the batteries rolling smoothly down when loading the dispenser. Too wide and the batteries will fly out, too narrow and the batteries will jam.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7ac74cca77c45.png"></figure>7.<ul><li>Final step is to install the last 2 stiffeners.</li></ul>&nbsp;Width adjustment:<ul><li>To widen the gap, turn the bolt clock-wise.</li><li>To narrow the gap, turn the bolt counter-clock-wise.</li><li>Start by turning all the bolts on full turn counter-clock-wise.</li><li>Grab your battery and insert it in the dispenser and hold it in front of the leveling knob. Adjust the knob so there is minimal play in the battery's axial direction. Continue this for all knobs.</li><li>Once done, release the battery from the top and observe its rolling down the slide. Adjust where necessary and your done.</li></ul>&nbsp;&nbsp;I advice using the original (designer) profiles, as these always have the latest changes incorporated.&nbsp;Would appreciate some feedback if this dispenser works with your batteries, or if you have any issues.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;