g33kerz

Dragon in the Woodshed

100x100 coaster 4mm thick - Dad Gamer message. Enjoy :)

Dad Gamer Coaster

Coasters

Updesky

DJI Mavic 2 Kit Card Drone UAV, print it, tear out and build yourself a drone! :-)If you appreciate my work please consider <a href="https://ko-fi.com/updesky" rel="nofollow">donating me on Ko-fi</a>.

DJI Mavic 2 Kit Card Drone UAV

Drone Fun

Settlers

A sleak holder for a typical RGB Remote.Mount it with adhesive tape or similar.&nbsp;Feel free to share photos of your results 😄📸🔴🟢🔵

RGB Remote Holder

LED Light Stuff

Zurlingo-3D

An annoying gift card lock box, perfect for gifting store cards, vouchers, cash, Keys or anything else you can fit inside!&nbsp;Probably the fastest printable lock box on Makerworld!&nbsp;<figure class="image image_resized" style="width:37.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/299338/2023-12-22_46600b20d45a2.gif"></figure>&nbsp;Features:&nbsp;<ul><li>Prints in under 2 hours (2 colour)</li><li>14 cross head screws secure the box shut.</li><li>Screw driver hidden within the ribbon strips</li><li>No additional parts are needed for assembly.</li><li>Print in place hinged design</li><li>Satisfying to open and close</li><li>A fun way of giving the ‘annoying’ person in your life, more than just a generic gift card.</li><li>Perfect for Birthdays, Weddings, Christmas or any other occasion that involves giving gifts :)</li><li>The Box, Lid and Ribbon Strips are interchangeable with my ‘Fun Version’ (See my profile)</li></ul>&nbsp;Assembly/usage:After printing all parts-<ul><li>Insert your gift of choice into the smaller half of the box.</li><li>Close the box</li><li>Assemble the ribbon strips in the cross pattern</li><li>Poke the cross head screw driver through both holes in the ribbon strips and hold in place with your finger</li><li>Offer up the ribbon strips to the lid of the box and locate the screw driver into the threaded hole</li><li>Tighten the screw driver with the tips of your fingers until the ribbon strips are snug</li><li>Use the second screw driver to insert all 14 screws around the outside of the box making sure they're done up snugly.</li><li>The box is now impenetrable without the cross head screw driver! - The ‘victim’ has to find and unscrew this from the ribbon strips before being able to open the box….mwahaha</li></ul>&nbsp;Extra Info:<ul><li>The print profile for the A1 mini has the main box separated into 2 parts. This doesn't affect anything and the two parts can simply be pushed together at the hinge, after printing. This should be very obvious when you have the parts in your hands.</li></ul>&nbsp;Please post your makes and rate your experience :) It's very much appreciated :P

*Annoying* Gift Card Lock Box - Print In Under 2 Hours - Multi Colour No AMS

Puzzle Box

MingGY

Featuring intricately designed articulated joints, this spider model can mimic the movement of a real spider. Each joint is meticulously crafted to allow flexible bending and rotation, bringing the spider to life in your hands.       For the best printing quality, I recommend using a 0.2mm nozzle&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_2cc4b022d7666.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_19e21135eccbc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_cd22cff008e8e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_74a81940d15ba.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_dd140ac93d014.jpg"></figure>

spider

Pranks

Lamps

mr3dproject

Simple tags with hook to use as a keychain. Put letters via slicer to write names, rooms or anything else.&nbsp;&nbsp;I&#39;d appreciate a like/follow or Boost and further support! Thank you

Name-Tag Keychain

Keychains

soarpix

<h2>2-door JEEP Wrangler - fully printable</h2>This is a 2-door version of my first Jeep Wrangler. You can find the 4-door version <a target="_blank" href="https://makerworld.com/en/models/433397" rel="nofollow noopener">HERE</a>.<ul><li>Complete model kit</li><li>Spinning wheels </li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different colors</li></ul>The body, vinsch and rearview mirrors was printed with bed support. Everything else was printed without support.5mm steel axle L=80mm (or use the printable one)&nbsp;If you have any questions, let me know in the comments or on my <a target="_blank" href="https://www.youtube.com/soarpixcom/" rel="nofollow noopener">YouTube channel</a>.&nbsp;You can also follow me on <a target="_blank" href="https://www.instagram.com/soarpix3d/" rel="nofollow noopener">Instagram</a> to see the designs i&#39;m working on =)&nbsp;HAPPY PRINTING!<h2>VIDEO OF 4-DOOR VERSION =) <a target="_blank" href="https://youtu.be/yHEh-oRqgo0" rel="nofollow noopener">https://youtu.be/yHEh-oRqgo0</a></h2>

2-door JEEP Wrangler - fully printable

Jeep

Drones

Maker1O1

Flexi-Facehugger orignally made by sh and licensed under CC BY-NCScaled and remixed for AMS by me.

Flexi Facehugger LONGER TAIL!  Xenomorph Alien VS Predator Articulated flexible print in place

Articulated

WildWolf_3D

Base/Peana Máscara Wolverine!&nbsp;Diseño realizado para exponer máscaras de Wolverine escala 1:1. Está pensado para imprimir con impresoras con sistema de multifilamento.Para montarla es necesario:&nbsp;-Paquete de modelos 3D.-Tuera hexagonal M8 DIN934 → x2-Arandela grande M8 DIN9021 →x1-Imán redondo de 7x2 → x12-Varilla roscada M8 L250mm (está medida se puede ajustar escalando la funda de la varilla, por si quieres que la máscara quede más alta o más baja).&nbsp;La máscara que se ve en las fotos es diseño de Do3D, pero sirve para cualquier máscara de Wolverine impresa en 3D.&nbsp;Espero que os guste!

Wolverine Mask Base/Stand - MARVEL

Helmets & Masks

3DMN

Unleash your inner superhero with our Batman figure! Dive into Gotham City&#39;s thrilling adventures with this meticulously crafted collectible.&nbsp; If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a>

I am Batman

Eccodyne

MINI ARADE PROJECT (v1.0) &nbsp;Welcome to the Mini Arcadee Project - Build your own mini arcade with a 5 inch screen to play your favorite 80s and 90s console games! This model has been tested with Raspberry Pi3 and Pi4 and works very well. Using an AMS makes the printing of this model with indivual colors very easy. Just paint as required in your slicer. All parts have been printed with a layer height of 0.2mm.&nbsp;You will need the print bed size of the X1 or P1 printers (256x256x256), it will not fit onto the smaller bed of the A1 Mini (180x180x180).&nbsp;Required hardware/tools for this build:<ul><li>5 inch screen: You will need a 5 inch screen with HDMI/USB connectors on the top of the screen module, not at the side (see photo). Otherwise you will not be able to fit the screen with all cables into the arcade, there will not be sufficient space.  My 5 inch screen has the following overall dimension, you want to look for something in the same spec range: 77.93mm x 121.11mm <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_d8ca529b5a6b5.jpg">  </li><li>Sound module and speakers for the Raspberry Pi: To get decent sound from the arcade, a WM8960 Audio-HAT-module an two speakers are required. You can get these via known online stores. Speaker size is approx. 45mm x 100mm (see photos). WM8960 and speakers usually come in a set. <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_ddfe700b8b65d.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_75f442a16978f.jpg">  </li><li>Flexible HDMI/USB cables and plugs Normal HDMI and USB cables for the screen (video signal and power) will not work given that these are way too bulky and will not fit into the arcade. There are flexibles cables available on various shopping portals and you need the right plugs for your Rapsberry Pi model, for example HDMI plugs for the Pi4 (Micro HDMI) are different than those for the Pi3 (normal HDMI plug size). The same goes for the power supply (USB-C vs. Micro-USB). See photos for the cables and plugs I bought for the Pi4. <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_7bf160df72b7f.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_a808b2643187c.jpg">  </li><li>Magnets You will need 8 circular magnets with a width of 6mm and a height of 3mm (see photos).  </li><li>Screws The following screws are required: 2x M2.5 x 6mm for the housing and 4x M2.5 x 5mm (or 4mm) screws for the Raspberry to be fixated on the Pi Baseplate.  </li><li>Bluetooth game controller(s) You will need one or two Bluetooth games controllers to play with the arcade.  </li><li>Superglue Use super glue to fix the joysticks to the housing.  </li></ul>Print instructions:All*.3mf files provide for indivual settings, so no one-in-all print profile has been uploaded!  Assembly instructions:&nbsp;IMPORTANT: Read note on facing of magnets before adding these to your prints!!<ul><li>Print “Housing Part A.3mf” with colors of your choice and fit m5 magnets into the holes in the build (2 on the bottom of the housing which will keep the Raspberry Pi in place and 2 at the back of the housing which will keep the backplate in place, see photo). <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_cadf3dfbab15.jpg"> Important: After adding the magnets to the housing, place one further magnets on each of the magnets in the housing. Mark the top of the added magnets with a pen. You will need this to know how to place these markes magnets to the backplate correctly for the magnets to not push off themselves. If you do not follow this procedure you will not able to remove the magnets from the prints without damaging these!  </li><li>Print “Housing Part B.3mf” with colors of your choice. The .3mf files provides for the required supports and modifiers (100% infill), see image below.  <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-13_9659e46b89b1e.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-13_e368e3bad83e8.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-13_624456a08ed6a.png">    </li><li>Print “Pi Baseplate.3mf” and add magnets to the baseplate from those added in step 1 above. The surface of the magnets you have marked in step 1 will need to face into the print, not facing out of the print! <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_336a4621e8802.jpg">  </li><li>Print “Backplate.3mf” and add magnets to the holes using the procedure described in step 2 above - the marked surfaces of the magnets need to face down into the backplate.  </li><li>Print “5 Inch Screen Holder.3mf” and “Screen Fixation.3mf” (this one two times). Place your 5 inch screen on the screen holder and fixate it with the “Screen Fixation” brackets. You can move the brackets towards the center of the screen to make them stay in place better.  </li><li>Print “Large Speaker Holder.3mf” two times.  </li><li>Place the “5 Inch Screen Holder” with the mounted screen into the slot of “Housing Part A”. Be gentle, do not use force.  </li><li>Place “Housing Part B” on “Housing Part A”. The screen holder slot of “Housing Part B” needs to fit on the screen holder. Be gentle. do not use force. The pin on “Housing Part B” will move into and rest in cutout on “Housing Part A” (see photo). Using a gentle procedure will avoid that the pin will break off. <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_0fd8f06e67a0f.jpg">  </li><li>Use two M2.5 x 6mm screws to fixate “Housing Part A” with “Housing Part B”, see photo for details. <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_4fd848b7b5085.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_31b96082dbdb8.jpg">  </li><li>Mount your Raspberry Pi on the “Pi Baseplate" using the four M2.5 x 5mm (or 4mm) screws.  </li><li>Connect your Raspberry Pi and the 5 inch screen with the flexible cables and plugs.  </li><li>Add a power cable to your Raspberry Pi and guide the cable through the cutout at the bottom of “Housing Part A” (see photo). <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_799fbd5f5f2eb.jpg">  </li><li>Push the speakers into the “Large Speaker Holder” prints. No glue or screws required. Then press the “Large Speaker Holders” with the attached speakers into the speaker-cutouts of “Housing Part A”. <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_b1ab3e6c76ee7.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/531978/2024-02-12_89cb7203620f7.jpg">  </li><li>Add the "Backplate" to the back of the arcade which will stay in place with help of the magnets added to the parts.  </li><li>Print “Joystick.3mf” two times with a color of your choice.  </li><li>Print “Joystick Ball.3mf” two times with colors of your choice. Push the Joysticks into the Joystick Balls, a little force may be required, no glue needed. Place the Joystick into the cutouts of “Housing Part A” and use superglue to keep them in place.  </li><li>Print “Marquee.3mf” with colors of your choice. Push the marquee into the cutout of “Housing Part A”. If requied, use a small piece of dual sided sticky tape to keep the marquee in place.  </li><li>Print “Coin Door.3mf” with colors of your choice. Push the Coind Door into the cutout respective cutout of “Housing Part A”.  </li><li>Print “Button.3mf” 16 times with colors of your choice and push these into the button cutouts of Housing Part A". No glue required.  </li><li>Print “Round Speaker.3mf” two times with colors of your choice and push these into the cutouts of “Housing Part A”. Again, no glue required.</li></ul>You can install Retropie on an SD-card and add your games - also install the drivers/settings for the 5 inch screen and the sound module according to the instructions of the relevant manufacturers. Do not forget to unmute the channels of the sound module if you cannot hear anything. Finally, connect your bluetooth game controller(s) with your Raspberry Pi and you are ready to go!&nbsp;Happy to help with any questions you may have. This design took quite some time and test prints - if you would like to support my work, pleasde consider a tip using the link in my profile. Many thanks for your support!&nbsp;&nbsp;

Mini Arcade Project

Arcade

DylansLightBoxes

Spiderman Light box. Easy to print, one plate for the lid and one plate for the back. Simply add a 1m white led strip and you have a great light box! The hole on the back is designed to fit a 20mm wire grommet (easily found on amazon).

Spiderman Light Box

Light Box

Mentech

the best thing that could happen to me in 3d printing is Boomerangs, it&#39;s a new hobby for me, so I&#39;m adding my second boomerang and try how long it can stay in the air for an incredible time Printing PLA, PETG, ABS, ASA

Boomerang V1

Fun Stuff

elikoll

Every StarWars fan has to print this.Let me see your finished prints. 🤩

Stormtrooper Helmet Croc Charm Starwars Brick 

Crocs

bovineblitz

Made some modifications to michelem&#39;s handy and attractive tabletop shelf organizer - 1) extended the width to 192mm primarily so I could fit two vitamin bottles side by side, and 2) tapered the top trim piece so for a nice flush finish. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455137/design/2024-05-05_70fc83fa35dbc.png"> The 3MF includes only the rough top with sizes up to 180mm, and I added a 120mm shelf as well so 180 and 120mm matches the height of two 150mm shelves. It probably doesn&#39;t really need it but for the two tallest ones I also included a version with a brace across the back for extra stability. It should print well without any supports, and I&#39;d suggest a little glue when you insert the connectors/trim.

Wider Tabletop Shelf Rack + tapered top trim

Shelf

pbbence1994

This kit card is based on the famous Blue Angels U.S. Navy flight demonstration squadron's F/A-18 Hornet Fighter jet. Create a nice formation flight display on your office desk by printing out multiple models! Cut the parts out with pliers, nail sissors or hobby knife. The assembly is easy and self explanatory. The parts should fit together tightly, but you can always use a bit of super glue to secure the parts together. If you don't need the frame I uploaded the model without it. Please keep in mind that the fine texts and details require very fine lines on the first layer so you need perfect bed adhesion. I recommend to use some adhesion spray like 3dLac. Stay tuned for more kit card planes! Have fun printing it!

Plane Kit Card (F/A-18 Blue Angels)

Punch Cards

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-18_5fb8e169839cd.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 45 minutes to 1.5h to print!<h2>This Keychain pack has 50 items in it separated onto 36 different plates! Games included:</h2><h3>Metroid, Zelda I &amp; II, Duck Hunt, Super Mario Brothers, Dr. Mario, Punch Out, Donkey Kong, Ice Hockey, Excitebike, Balloon Fight, Kid Icarus, and Ice Climber!</h3><h2>Check out My other Video Game Keychain Packs here:</h2><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bf102988c5d4e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_af8e11b72f8b8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_d591f34521b71.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_65642b6d44be1.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_39c8a218834e3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5772d38e54629.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_e1de8136a8cba.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_652472aa40ac8.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5bb325e63de11.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Like this pack? Check out my other video game keychain packs here:  <figure class="table" style="height: 261.055px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bee3dac9a4a4f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_ca2f6c28ed6ef.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_1f9887d1aa63b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Nintendo Classics Keychain Pack

Key chains

wuguigui

This is a 3D printable clip based on my previous design: https://www.thingiverse.com/thing:4849576I modified the shape of the teeth(To help maintain the bite force in the initial state), the round shape can fit the gap easily, with no influence by the printing results.I'm using Bambu Lab P1P with high accuracy to print it, so I left 0mm between the body and the teeth, and all parts fixing well.The recommended filament is Bambu Lab PLA-CF（3 walls, 40% infill grid pattern) or PETG. You can try other materials as well.If you like it, please click"like" for me, it will encourage me to design more new things. Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)Recommended Filament: Bambu Lab <a target="_blank" href="https://shrsl.com/4duvh" rel="nofollow noopener">PLA-CF</a>or <a target="_blank" href="https://shrsl.com/4duvd" rel="nofollow noopener">PLA-Tough</a>Thank you!

Clip - with bite force in the initial state

House

braga3dprint

Transform your Raspberry Pi into a Network Attached Storage (NAS) with this specially designed enclosure! Originally conceived by Michael Klements using transparent acrylic and laser-cut files, this version is adapted for 3D printers.&nbsp;For detailed instructions and inspiration, check out Michael Klements&#39; original blog post and YouTube video:<ul><li>Blog Post: <a target="_blank" href="https://www.the-diy-life.com/how-to-build-a-raspberry-pi-nas-using-open-media-vault/" rel="nofollow noopener">https://www.the-diy-life.com/how-to-build-a-raspberry-pi-nas-using-open-media-vault/</a></li><li>YouTube Video: </li></ul><figure class="media"><oembed url="https://www.youtube.com/watch?v=H4Be2kfLJmA"></oembed></figure>Build your own NAS and enjoy a functional and innovative storage solution!

Raspberry Pi DIY NAS

Tech

Tri-3D

Print with AUX fan off to prevent warping.&nbsp;For Commercial Rights To This Model: https://www.patreon.com/Tri_3D

DeadPool Mask Light Box / Wall Art

Marvel

Fletch

The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.&nbsp;<figure class="image image_resized" style="width:32.87%;"><img src="https://makerworld.bblmw.com/makerworld/draft/714871/2024-03-08_74e55f987e327.jpeg"></figure>&nbsp;This was a challenging model to create from scratch (for me anyways) in pieces that could be put into a kit card. It went through many iterations and prints before being ready to share with all of you Star Wars fans. There are a few small pieces that have small connections. A profile with each part broken out is available in case there are any issues during assembly.&nbsp;Tips<ul><li>Try not to put too much pressure on the frame when attaching the engines. The engine connection to the frame is rectangular, so make sure they line up.</li><li>Snapping the main top and bottom pieces to the frame has a slight offset on the clips. The first half is easy since you can see the frame, try to align the edges before attaching the other half to the frame.</li><li>Plates on the top side should be assembled last.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/714871/2024-03-08_737c1aea18b258.jpg"></figure>

Imperial Star Destroyer Kit Card - Star Wars

Star Wars Models

kriswillcode

8 grams of filament, 20 minutes to print, and no assembly!&nbsp;Update: I added a new profile for a switch with increased tolerances. It&#39;s less “clicky” than the standard version, but should print easier if you&#39;re encountering problems with the toggle fusing to the body. <a target="_blank" href="https://makerworld.com/en/models/467451#profileId-392548" rel="nofollow noopener">Loose - 0.2mm layer, 3 walls, 15% infill</a>&nbsp;Taking inspiration from my <a target="_blank" href="https://makerworld.com/en/models/66672" rel="nofollow noopener">original fidget toggle switch</a>, I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it&#39;s definitely still a work-in-progress), so please report any issues you encounter.<h3>Print Settings</h3><ul><li>Material: PLA (see below)</li><li>Nozzle Size: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Vertical Walls: 3</li><li>Top/Bottom Layers: 5</li><li>Infill: 15%</li><li>Supports: Nope</li></ul>The switch has been tested with several different filaments. All PLA variants tested (standard, matte, CF, silk, and Plus/Pro/Max) worked great, but standard and CF worked best. PETG was also tested, but the switch&#39;s &#34;click&#34; action wasn&#39;t very strong.&nbsp;The model has some areas with limited bed contact, so make sure you have decent bed adhesion. A glue stick or another adhesive is very helpful here.&nbsp;After printing, you&#39;ll need to &#34;break&#34; the toggle from the axle. This requires a small amount of force, but you should be able to accomplish this using only your hands. You&#39;ll also need to flip the switch a few times to fully wear it in and smooth out the action.&nbsp;I designed the tolerances to be fairly loose for a 0.4mm nozzle. If you&#39;re having trouble with the toggle fusing to the axle, lower your extrusion flow ratio by a percentage point or two. I also added a new “loose” variant with increased tolerances, but the action is less “clicky.”&nbsp;If you print one, please post a make! If you encounter any issues, post a comment. Thanks!

Print-in-Place Fidget Toggle Switch

Fidgets

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Functional

BODY3D

Fidget Flower

Toys

Galactic Armory

3D Print Files in 1:48 scale for wargaming and miniature printing. 11 additional poses are included in my Patreon for the months of March and April 2024!&nbsp;12 different poses included! &nbsp;The base of each standard trooper is compatible with wargaming standards.&nbsp;Includes pre-supported versions of each file.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

B2 Battle Droid Miniature

The Crafty Maker

&#34;You can&#39;t win, Darth. If you strike me down, I shall become more powerful than you can possibly imagine.&#34; ―Obi-Wan Kenobi to Darth Vader —&nbsp;The Duel on the Death Star was a duel between Jedi Master and survivor of Order 66 Obi-Wan Kenobi and his former apprentice and now sith lord Darth Vader on the first Death Star. Obi-Wan sacrificed himself so that Luke Skywalker, Leia Organa, Han Solo, Chewbacca, R2-D2 and C-3PO could escape in the Millennium Falcon. (source: Star Wars Canon Wiki)&nbsp;The design requires the following colors<ul><li>Black</li><li>Bright Blue</li><li>Bright Red</li><li>Light Grey</li><li>Dark Grey</li><li>White</li></ul>These are the filaments I&#39;ve used<ul><li>R3D PLA Black</li><li>Fillamentum ExtraFill PLA Sky Blue</li><li>Fillamentum ExtraFill PLA Traffic Red</li><li>Prusament PLA Gravity Grey</li><li>Fillamentum ExtraFill PLA Iron Grey</li><li>R3D PLA White</li></ul>You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)  &nbsp;Print instructions&nbsp;No need for AMS or MMU. All color changes are done using filament swaps.<ul><li>100% infill</li><li>Arachne wall generator  </li><li>Plate 1: - Start with Black  - at layer #4 - 0.80mm swap to Bright Blue - at layer #7 - 1.40mm swap to Bright Red</li><li>Plate 2:  - Start with Dark Grey - at layer #3 - 0.60mm swap to White - at layer #6 - 1.20mm swap to Light Grey</li><li>Plate 3:  - Light Grey</li><li>Plate 4:  - Start with Dark Grey - at layer #3 - 0.60mm swap to Light Grey</li><li>Plate 5:  - White</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you&#39;ll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Star Wars Duel on Death Star Shadow Box

Decor

DesignCraft

DISCLAIMERS:<ul><li>Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.</li><li>INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a matching spool to test so your feedback is important!</li></ul>Description:&nbsp;This adapter system wraps the edges of an INLAND 1kg 199x64mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>INLAND nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print INLAND.A for the left-hand side and INLAND.B for the right-hand side</li><li>Affix to each respective side of the INLAND spool</li><li>See attached photos</li></ul>Notes:<ul><li>The reason for separate models is that the spool's wall width is thicker on the side with the branding label.</li><li>I'm not sure if all INLAND spools are wound in the same direction so if the branding label is on the opposite side you may need to swap the rings from what I have here in the instructions.</li><li>It may help if you remember that INLAND.B is for the Branding side of the spool.</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

Coasters

Drone Fun

LED Light Stuff

Puzzle Box

Pranks

Lamps

Keychains

Jeep

Drones

Articulated

Helmets & Masks

DC

Arcade

Light Box

Fun Stuff

Crocs

Shelf

Punch Cards

Key chains

House

Tech

Marvel

Star Wars Models

Fidgets

Functional

Toys

Star Wars Models

Decor

3D Print Tools