Sholphin02

Pirate Bay:<ul><li>Rock</li><li>Water</li><li>Dock</li><li>Wood</li><li>Flame (fuzzy skin)</li><li>Flag (the skull is on the top of the flag, you can stop and change filament or use AMS)</li></ul>&nbsp;

Pirate Bay

Jeux

filete3d

Airless Tennis Ball 2.0, a complete redesign based on feedback received from more than 10,000 downloads of the previous model.&nbsp;Updates:Improved hex mesh density to add strength and functionality in a wider range of materials. General increase in thickness for a better feeling of weight and bounce. Polished seam line to achieve homogeneous bounce capacity throughout the entire ball and better aesthetic approximation.&nbsp;The conclusions on recommended materials show that to achieve impact resistance it must be printed on flexible materials with a certain level of hardness to keep bounciness.&nbsp;Recommended materials for bounciness aproach are TPU 98A and PLA Flex (as seen in gif from 3DJVModels, check his profile!). They are materials similar in their hardness, which provide a bounce distance of +-50% from the drop height, while the official bounce is 53-58%.TPU 95A resists impacts without breaking but has a bounce reduced to approximately 20% from drop height.&nbsp;Among flexible materials, TPU in its different hardness provides an incredible level of layer adhesion, which is why it achieves the highest tested impact resistance without cracks.&nbsp;PLA or PLA+ will work only for displaying purposes. We do not recommend using these materials if you want to make it bounce as it can break easily.&nbsp;Check my current state on airless balls:Airless Ping Pong, Table Tennis Ball: <a target="_blank" href="https://makerworld.com/en/models/386079#profileId-286461" rel="nofollow noopener">https://makerworld.com/en/models/386079#profileId-286461</a>Airless Baseball Wiffle Softball Ball v2.0: <a target="_blank" href="https://makerworld.com/en/models/227359#profileId-244997" rel="nofollow noopener">https://makerworld.com/en/models/227359#profileId-244997</a>Airless Basket , Soccer, Voley or Handball Ball v1.2: <a target="_blank" href="https://makerworld.com/en/models/223189#profileId-241192" rel="nofollow noopener">https://makerworld.com/en/models/223189#profileId-241192</a>Airless Golf Ball: <a target="_blank" href="https://makerworld.com/en/models/383904#profileId-284030" rel="nofollow noopener">https://makerworld.com/en/models/383904#profileId-284030</a>&nbsp;

Airless Tennis Ball 2.0 Pickleball Wiffle

Sport

mrkernelpanic

Use the provided print profile and print the blades horizontally. I used Super PLA+ which is less brittle and a little bit dampening to avoid cracking,but harder to print unfortunately.&nbsp;You need 2 of M4x50mm screws and nuts to fix the blades to the hub adapter.

Folding Propeller for Flipsky 7070 E-Foil Motor

Kite

Industriee

Simple Cable holders

Tools

halil_d

Bambulab A1 Mini AMS Lite Portable Wallmount

This small ventilator is ideal for use in hot summer days. It is built with 120mm PC fan and is ideally printed with a diamond sheet build plate for better optics. Parts:1x 120mm USB fan: https://www.amazon.co.uk/s?k=usb+fan+120+uphere&amp;crid=1WTPS6BBFNFM4&amp;sprefix=usb+fan+120+uphere%2Caps%2C76&amp;ref=nb_sb_noss 4x fan screws that should be included with the fan 4x M3 with min. 10mm (Optional) 4xM3 2.5 mm Brass Insert Nut

PC Fan Ventilator

Gadgets

hexacontaphilie

I put every letter in a different file so you can arrange it on you print bed. You can scale the parts but don't scale all the axis the same otherwise the tickness will change.If you want the first layer as the visible layer, don't forget to horizontally flip the parts in you slicer.You can fix it on a wall with double-faced tape.

Porsche logo silhouette wall decoration

Muskoka Research

<div><h1>Summary</h1><div>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLEAdditional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stlAssembly (See Pictures):<ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"> Duramic PLA+ / TPU </a><pre><code> Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

Hardware

PyroGhostX

RC Airplane Ceiling Hanger

AnubisC

在我原有的展示架基础上适当缩减了厚度，展示更多的小船细节，可以作为色卡使用预留的方块可以粘贴材料名称，我暂时没有标注标签On the basis of original display stand, the thickness has been appropriately reduced to show more details , which can be used as a color card. The reserved blocks can be pasted with material names, but I haven&#39;t done so yet

小船展示架轻量版 3DBenchy Dry Dock Display Stand

3D print

Buedan123

Boxster 987 

Déco

bdwilson

One of the things I continue to worry about with my A1 mini, is putting pressure down on the Z-Axis when removing the PTFE connections from the AMS Lite Filament Hub. The rings are very small and difficult to get to with my stubby meat hands. I looked at the other removal tools out there, but none of them met my needs:<ul><li>PTFE holes had to be big enough to not scratch the PTFE, but small enough to not move around too much (so you could pull it back up the PTFE if you don't want the extra 5.5mm of height on the Filament Hub all the time.</li><li>Needs to provide enough leverage to push down the PTFE connectors (this is why they are extruded a bit)</li><li>Needs to not add too much extra height (only 5.5mm added to height).</li><li>Need to be able to pinch to remove without putting pressure on Z-Axis.</li></ul>The plate has both the round and rectangle versions, so you can try either. The clip that goes around the AMS hub is small enough to leave on as it still allows the filament hub to “spring”.&nbsp;EDIT: I have updated the models and 3mf so that they stay flat on the printer bed without the need for a brim.

A1 AMS Lite Filament Hub PTFE Removal Release Tool

A1 Mods