user_2143808917

martinMaker

USB and SD card Holder

functional home products

office supplies

Sevro

Update 22.05.2024I changed settings in my print profile. I decreased Top Z distance in support from 0.2 to 0.1 so now support hold better the model. This setting eliminate problem with nose.Important: If you want better quality of this model open door of your printer (if you have X1 Carbon) &nbsp;&nbsp;A sculpture inspired by John Bizas arts.It can stands on its fins or on stand. The stand fit tightly without glue.&nbsp;&nbsp;

Whirpool Shark

Home Decor

Twisted

mag holder for vr60/vr80 9 round magazines. it goes together with 4mm shock cord, and is molle compatible, or simply put some nylon webbing through the slots to make a belt loop. this will hold the mag tight so no tie down necessary. i printed thjis in petg-cf for added durability and longevity. although ABS or ASA should also work

vr 60 magazine holder

Gun accerssories

干撒思密达

龙珠龟仙屋

Memorabilia Decorations

EEEEEE

<img class="image_resized" style="width: 56.55%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000460232/design/2024-05-10_c3b95794b406a.jpeg">This thrown indoor glider prints in PLA, using 2g of filament and 6m of print time. It should be thrown like a paper airplane, and matches/exceeds the stability of the previous versions when used properly.&nbsp;Instructions:Remove the glider from the build plate, be careful to not warp the wings if the plate is heated. Fold the 2 stabilizers up 90 degrees relative to the downwards-facing head. Make sure that the stabilizers are folded relatively straight, with equal wing space on either side. Lift the elevators 25-40 degrees up relative to the head. Refer to the picture above for troubleshooting.&nbsp;To throw, grab between the head and wing of the plane with your thumb and index finger. The elevators and stabilizers should be facing up, and the head should be facing down. Throw straight similar to a dart or paper airplane. Use a medium amount of strength.

Pocket Indoor Glider v6

Stuff for kids

jfmg

Updates:- [03/06/2024] - Fix Pause layer height- [01/06/2024] - Stopper feature - Added a new Base + Stopper and Stopper slider. These pieces will allow you to lock the spiral.  <figure class="image image_resized" style="width: 45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465270/design/2024-06-01_7d2047ba79be2.png"></figure> - [17/05/2024] - Updated the “Base” piece to have 5 circles in the bottom face in case you want to glue rubber feet - [16/05/2024] - Added Top piece with 2 and 3 jaws &nbsp;This is a new version of <a target="_blank" href="https://www.printables.com/model/619340-helping-jaws" rel="nofollow noopener">Helping Jaws</a>No screws, inserts or bearings are needed. 100% Printed parts.&nbsp;Tested with PLA, no supports needed&nbsp;<h4>Tips:</h4>Print the spiral and the teeth as perfectly as you can. Use “Ironing” on the top surfaces of the Spiral and Base to make them as perfect as possible. After assembling, things might be a bit stuck but just open and close the teeth several times until it starts to spin freely.<h4>Optional:</h4>I added slots for 8mm diameter nuts (M8) in the Base and Spiral for weight.  These are optional but it feels better to handle the Helping JawsI also used machine oil (any thin oil will work) to make it as frictionless as possible.Apply the oil to the spiral and below the spiral.

Helping Jaws

Tools

Litolunar

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.58mm) swap to dark grey At layer #9 (0.74mm) swap to White for the rest.

Hueforge batman

Wall art

Informalmarc

A free pen holder I made using the Helldivers model from HD2 and rigged up in Blender.

Helldivers 2 Pen Holder

_aron_

Secure your 20mm straps with ease using this 3D-printed strap lock! Designed for straps with a loop on one end, this lock prevents accidental slippage and provides a quick-release mechanism for easy removal. The design is made to fit the 20mm straps on Lundhags outdoor pants precisely.&nbsp;Key Features:<ul><li>3-Piece Design: Easily printable and assembles easily using just some 1.75mm filament and a lighter.</li><li>1.75mm Filament Pins: Melted and flattened for a secure, robust fit.</li><li>Loop Retention: Prevents the looped end of your strap from sliding out.</li><li>Quick-Release Lever: Securely locks your strap in place but allows for quick removal when needed.</li><li>Customizable: Print in your favorite color filament to match your gear.</li><li>Perfect for: Watch bands, clothes, backpacks, camera straps, pet collars, and more!</li></ul>Printing Tips:<ul><li>Recommended material: ABS filament for durability.</li><li>Layer height: 0.2mm</li><li>Infill: 100%</li></ul>Assembly (video below):<ol><li>Print</li><li>Insert 1.75mm filament into the designated holes and cut to length.</li><li>Melt and flatten the ends of the pins to secure.</li></ol><figure class="media"><oembed url="https://www.youtube.com/watch?v=QCM9tLyIr4A"></oembed></figure>

20mm Quick-Release Strap Lock with Loop Retention

handy odds and ends

Tassesin

Not much to say really. I wanted to make silica box design for my vacuumed spools which is functional and easy to use.&nbsp;Features:<ul><li>lightweight - 17g</li><li>easy, fast printing and small footprint</li><li>no post processing - just insert the lid</li><li>click lock on the lid</li><li>fits tight on the spool</li><li>strong enough to withstand the force of the vacuum bag</li></ul>Printing tips:Can be printed from PETG or PLA. Don&#39;t use brittle type materials.&nbsp;&nbsp;P.S. If you like my work please boost, like, rate or comment. This will help me to continue materializing my ideas in this new world for me. Happy printing! You can check my other models <a target="_blank" href="https://makerworld.com/en/@Tassesin" rel="nofollow noopener">HERE</a>.