superdaN

humebeam

About&nbsp;This is a silica gel box for about 100 g of silica gel. The silica gel you use should be 2 mm in diameter or larger. The box has a lid that slides in place and it is secured with a single M3 head cap bolt (6 to 12 mm bolts will fit).I keep one of these in each of my dry boxes that hold about 8 spools of filament, it keeps the humidity down and the prints are improved. The silica gel box is quite sturdy with 3 mm walls and could be made a little thinner if you want to save some filament, I will upload the step files so you can edit the design easliy. A complete (empty) box with lid is around 80 g.&nbsp;Support&nbsp;All my designs and mods are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)<ul><li><a target="_blank" href="https://www.paypal.me/humebeamengineering" rel="nofollow noopener">https://www.paypal.me/humebeamengineering</a></li></ul>Threaded or heated insert?&nbsp;I've uploaded two versions: One version is designed for a heated M3 insert, I use the Trianglelab inserts linked below under BOM myself.The other version is threaded where you just need to screw in an M3 bolt, it's natually not as strong but is fine as long as you don't overtighten it.&nbsp;BOM - Bill of Materials&nbsp;You need some head cap allen bolts and some brass inserts. I use these:&nbsp;<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_AUubZY" rel="nofollow noopener">M3 Hex Head Cap Allen Bolt (6 to 12 mm will fit)</a></li><li><a target="_blank" href="https://s.click.aliexpress.com/e/_AtayyQ" rel="nofollow noopener">Trianglelab M3 Brass Embedded Nut</a></li></ul>You also need some Silica gel beads. I recommend these that change colour from blue to pink so you know when to reactivate/dry them:<ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk4wDZR" rel="nofollow noopener">500 g Silica Gel Beads (Blue)</a></li></ul><h3>Print Settings</h3>Printer:Qidi X-MaxRafts: NoSupports:NoResolution: 0.2 mmInfill:25%Filament: eSUN ABS+ (Various colours)&nbsp;Notes: &nbsp;Just print it. No supports are needed. The lid can be printed both normally and upside down depending on which finish you want, it can look quite nice printed upside down if you're printing on glass for example or on the textured side of the awesome <a target="_blank" href="https://s.click.aliexpress.com/e/%5C_9u6HmN" rel="nofollow noopener">Energetic PEI</a> sheet.It's available for most printers.&nbsp;Pictures<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_n6oufdc7rjcg.jpeg"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_gvz4f308veky.jpeg"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_zfjkvvwg3mxg.jpeg"></figure><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/466667527/draft/2023-09-18_cxmu99x8gp1b.jpeg"></figure>

Silica Gel Box with Sliding Lid (for 100 g gel)

ToPrint

madizmo

This is the latest version of my AMS saver after bambu asked me to take down my old models. Apparently some people managed to damage the feeder leds with some of the previous models. This version mounts to the top of the feeder unit using double sided sticky tape so there is absolutely no chance of causing any damage to your AMS unit. I used the clear 1mm thick sticky tape off Temu on mine and they are stuck very well. I&#39;ve been using 100mm ptfe tube with no issues, if you seem to get loading issues try 85mm. The ID of the ptfe hole is 4.2mm but because of the print orientation it can still be tight, i run an allen key through it along the top edge to smooth the layers a bit. You can play with flow rate a bit as well if too tight&nbsp;works best with my <a target="_blank" href="https://makerworld.com/en/models/172221#profileId-189118" rel="nofollow noopener">filament guides</a>, the ones in the pictures i&#39;m still testing but the originals work great&nbsp;&nbsp;Disclaimer: This is a modification to the machine and any issues caused by these mods will not be covered by Bambu.

ToPrint

P1S