Roksteadyii

Williams Industries

This originally was going to be a modular standing display for small toys or other small items. While this worked great for that purpose, I ended up needing a way to better display all of our tiny prints that we sell at shows. This has worked perfectly for us, especially with the magnets helping them stay in place even when 1000&#39;s of people are digging through them.&nbsp;I used 12mm x 2mm magnets, make sure they are good and strong before gluing them in. I did the negative space in BS in case you want to mod that for a different size. It is a good snug fit so make sure your printer is dialed in. Mine fit perfect with the profile I used with Matte PLA.&nbsp;There are 8 plates with several purposes<ul><li>Plate 1- single box with no magnet</li><li>Plate 2 single box with 4 magnets for ones that are going to be in the center</li><li>Plate 3 single box 3 magnets for corner pieces</li><li>Plate 4 single box 3 magnets for front middle pieces</li><li>Plate 5 quad box with no magnets</li><li>Plate 6 quad box 4 magnets for the corner</li><li>Plate 7 quad box with magnets on all sides for middle pieces</li><li>Plate 8 quad box with six magnets for center front pieces</li></ul>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000510121/design/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;&nbsp;

Modular Display 

show

DjangoCashflow

Check out my other Kit Cards: <a target="_blank" href="https://makerworld.com/en/models/252373#profileId-268741" rel="nofollow noopener">Imperial Lambda Shuttle</a> <a target="_blank" href="https://makerworld.com/en/models/232273#profileId-249216" rel="nofollow noopener">X-Wing</a> Landing Gear can be found <a target="_blank" href="https://makerworld.com/en/models/402365#profileId-303977" rel="nofollow noopener">here</a>Display Stand can be found <a target="_blank" href="https://makerworld.com/en/models/403956#profileId-305629" rel="nofollow noopener">here</a> Set your coordinates for an immersive build experience with the &#34;Millennium Falcon Kit Card,&#34; a high-detail masterpiece that embodies the core of the most storied spacecraft in the Star Wars galaxy. Tailored for enthusiasts who appreciate the confluence of model-making and the cultural phenomenon of Star Wars, this kit is the fruition of a labor of love, designed to honor the cherished memories of fans worldwide. Features:Precision-Crafted Assembly: Developed from the ground up with a 0.4mm nozzle and the Bambu A1&#39;s 180x180 build volume in mind, this Millennium Falcon is designed as a kit card with every detail, ensuring an assembly experience that is both engaging and faithful to the ship’s legendary design.  Tool-Free Construction: Embodying the ease and simplicity of kit card modeling, this Millennium Falcon requires no additional tools or glue for assembly, offering a clean and straightforward build process that reflects the ingenuity of its design.  Intricate Detailing: Every panel, port, and plate is rendered with remarkable precision, inviting builders to explore the Millennium Falcon&#39;s intricate design as seen on the silver screen.  Engaging Build for All Ages: With components engineered for ease of identification and removal, modelers of all skill levels can enjoy bringing this icon of space adventure to life.  Compact and Comprehensive: The kit is thoughtfully planned to utilize the capabilities of the printer, with every detail scaled to be perfectly captured at the size allowed by the nozzle, delivering an incredibly detailed model that belies its simplicity.  Upcoming Enhancements: A custom stand and landing gear are on the horizon, promising to complement your Millennium Falcon display with a touch of elegance. Printing Advise: For a stellar print of the Millennium Falcon Kit Card, stick close to these succinct guidelines or employ the custom profile provided for optimal results:<ul><li>Layer Height: 0.08mm for capturing the finest details.</li><li>Print Speed: Very slow, to ensure precision.</li><li>Infill: 10% lines infill for internal support with minimal material.</li><li>Walls: 2-3 perimeters for robustness without compromising detail.</li></ul>Add modifier to only use ironing on the desired layers: <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_e33ff2e0bc08e.png"><img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_95ac1dfc11b69.png"> Assembly Instructions Look up table for all pieces <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_55fe8b31e5355.png">  <figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/FMXPxzwQ83w"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=FMXPxzwQ83w"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/FMXPxzwQ83w" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure> Step 1: Main Body Assembly<ul><li>Locate the MainBodyMid (labeled as &#39;1&#39; on the kit card).</li><li>Take four pins from the array marked &#34;Pins&#34; on your kit card.</li><li>Align the pins with the holes on the MainBodyMid (1) as indicated in the assembly guide image. Press them firmly into place, ensuring they are securely fitted. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_a97e4e95e5e6d.png"> Step 2: Securing the Main Body Sections</li><li>Take the MainBodyUpper (2) and MainBodyLower (3) sections from your kit card. Align the MainBodyUpper (2) with the top of the MainBodyMid (1), ensuring the pins inserted previously fit into the designated holes of the upper section.</li><li>Similarly, align the MainBodyLower (3) with the bottom of the MainBodyMid (1), matching the pins to the corresponding holes on the lower section.</li><li>Carefully press both the upper and lower sections onto the pins with equal pressure on both sides to avoid bending or breaking. The pieces should slot together seamlessly, creating a sturdy central structure of your Millennium Falcon. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_4bf60043625c8.png">  </li></ul>Step 3: Cockpit Assembly<ul><li>Identify the CockpitUpper (4) and CockpitLower (5) pieces from your kit.</li><li>Retrieve a single pin from the &#34;Pins&#34; section.</li><li>Orient the CockpitLower (5) so it aligns with the underside of the CockpitUpper (4).</li><li>Insert the pin through the corresponding hole in the CockpitUpper (4) and press into the hole in the CockpitLower (5) until both halves are firmly connected. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_4faa352ff2eba.png"> Step 4: Attaching the Cockpit</li><li>Locate the areas on the MainBodyMid (1) where the cockpit will be placed.</li><li>Take two pins from the &#34;Pins&#34; section of your kit card.</li><li>Insert the pins into the holes on the MainBodyMid (1) and MainBodyUpper (2) designated for the cockpit attachment, as shown in the visual guide. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_5f414a4a83b25.png"></li></ul> Step 5: Finalizing the Cockpit Installation<ul><li>Carefully align the assembled cockpit (comprising CockpitUpper (4) and CockpitLower (5)) with the pins protruding from the MainBodyMid (1) and MainBodyUpper (2).</li><li>Gently slide the cockpit onto the pins until it sits flush against the main body.</li><li>Ensure that the cockpit is securely attached and properly aligned with the rest of the structure, with no gaps or misalignments. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_3d2b8f76c6bd1.png"></li></ul> Step 6: Sidepiece Installation<ul><li>Select two pins from your kit and locate the pin insertion points on the MainBodyLower(3) and MainBodyUpper (2) where the sidepiece will be attached.</li><li>Carefully insert the pins into the designated holes on both the upper and lower parts of the main body, as indicated in your assembly guide.</li><li>Take the sidepiece (identified as &#39;6&#39; in your parts list) and align it with the pins.</li><li>Press the sidepiece firmly onto the pins, making sure it fits snugly against the main body with no gaps.</li><li>Repeat on other side <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_45856ac8a4cda.png"></li></ul> Step 7: Assembling the Radar Dish<ul><li>Begin by taking the dish (9) and the dish holder (7) from your kit.</li><li>Insert the dish onto the holder, ensuring a tight fit.</li><li>Locate the dish base (8) and find the corresponding pins on the MainBodyUpper (2) that are designated for the radar assembly.</li><li>Align the dish base with the pins, and then carefully fit the dish and holder assembly onto the dish base.</li><li>Once aligned, gently press down so that the entire radar dish assembly attaches securely to the MainBodyUpper (2). <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_78b7bb38cc5aa.png"></li></ul>Step 8: Mounting the Cannons<ul><li>Select the cannons (labeled &#39;10&#39;) from your kit.</li><li>Identify the hole on the top of MainBodyUpper (2) designated for cannon placement.</li><li>Take the pin on the base of a cannon and align it with the hole.</li><li>Gently press the cannon into the hole, applying even pressure until it bottoms out, ensuring it is fully seated and secure.</li><li>Repeat this process with the corresponding cannon on the MainBodyLower (3), ensuring symmetry and proper alignment. <img src="https://makerworld.bblmw.com/makerworld/draft/840253/2024-03-27_8ddc6ea0030d2.png">  </li></ul> Congratulations on Assembling Your Millennium Falcon Kit!You&#39;ve successfully navigated the assembly of this iconic starship, demonstrating skill worthy of a true pilot of the Millennium Falcon. Revel in the craftsmanship and detail of your completed model, a testament to your dedication and the legacy of Star Wars.Enhance Your Millennium Falcon ModelTo complete your display, don&#39;t forget to download the matching stand, landing gear, or the closed hatch, each designed to complement your Millennium Falcon perfectly. These finishing touches will soon be available to elevate your model to exhibition-ready status. Keep an eye out for their release and ready your collection for these final additions!

Millennium Falcon Kit Card - High Detail - No Glue

Star Wars 

Bearded Printer

Let&#39;s mix things up with another type of dragon: The water dragon!&nbsp;This creatively designed and articulate &#34;Water Dragon&#34; model is engraved with intricate details that capture the imagination, giving it a sense of mystique and fantasy! Its lightweight structure enhances its flexibility, making it an unbelievably realistic dragon that moves and twists just like the real thing.&nbsp;Engage your senses by handling and playing with this articulating dragon. Whether you prefer posing it or fidgeting with it, you will get lost in the fascinating world this model opens up. Dive deeper into the realms of fantastical beasts with this unique Water Dragon, the perfect addition to any collector&#39;s 3D model repertoire.&nbsp;You can admire its stunning details in the images available, ranging from High Poly to Medium and Highest Poly versions. Experience cutting-edge 3D modeling and add a splash of magic to your collection!&nbsp;As I start to get into more organic-looking designs, I&#39;m always looking to improve in my capabilities. Don&#39;t be afraid to send me your feedback and let me know your thoughts on these new designs.

Water Dragon - Articulated Dragon

Dragons

HG_Design

Harry potter cauldron lampThe inner hole allows a USB cable to pass through, to be compatible with any light.The top cover can just be put down.Hope you like it&nbsp;

Harry Potter Cauldron Lamp

Halloween

planpa3d

These Must be printed with a multi material or multi color printerMMU printing on my Bambu Textured PEI plate these turned out perfectly. All Can be printed with only four colors, with the standard AMS, but I separated a 5th color for the Flower cup design if you so wish to change the center color of the flower.&nbsp;filaments Used<a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/pla-metal?variant=41002960552072" rel="nofollow noopener">Bambu metallic Green ( Pipe container for coasters)</a> <a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/pla-metal?variant=41002951737480" rel="nofollow noopener">Bambu metallic Gold</a> <a target="_blank" href="https://us.store.bambulab.com/products/pla-basic-filament?variant=41135419228296" rel="nofollow noopener">Bambu basic PLA Green</a> <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Clog-Free-Consumables-Dimensional/dp/B087QCWCWC/ref=sr_1_1_sspa?dib=eyJ2IjoiMSJ9.ZglIibVwdJ5BC_tDROwREF0wsqv8VDNae70ncGiPdZ-Pdw6pUXXHRalcNaYdmOL62IJ3YPhwb_BvQwYAeYj9rreikbgUAOcCxy6fuGsj4e6oaHubihF_9Kvtne1SXtS3dq-bUTOs-0e5jQL45BHBDcWj3hwgEB5t45sKWXh5zvBBA8ne8LmCZzXO1Mixr8OnYKXaXmm1eH8Z2Gx-eXQUhKqqdcLG-pZwaZ045ufrQbA.SFCN67L2YnCwXF9Bs4uaBea5J1dGTBHtVjUxKmud96s&amp;dib_tag=se&amp;keywords=overture+royal+copper&amp;qid=1709826183&amp;sr=8-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;psc=1" rel="nofollow noopener">Oveture silk Copper (Brown)</a> <a target="_blank" href="https://www.amazon.com/Polymaker-Filament-Metallic-Powerful-Printer/dp/B0B8HWB55D/ref=sr_1_1_sspa?crid=3BK880TDO4N3T&amp;dib=eyJ2IjoiMSJ9.b0-g4Mcl8JYROET7fxyRCnCkqje0BrJghW1mGGnCVrjjx6rvls24bgfa99ThpW8p9Qnd8a9zq_68AklG1yj_SfggMEJOjk5utyElOhEvxPHO2B1yQE9NpSWO8TyEaFiwhV6zpZxfSSPlLnPEpzM2y9CWY-D3MrWhm0kvaNxyPDTyey7jaP5YAR-LKdXe14w-MW1ro2XBKlSk1M2o6ivHj95SVGVw_EWSZHfrTW4Hl6k.KVyRs1v985uMh917OskUBiFZqod38BBs0W5iYxteYJ8&amp;dib_tag=se&amp;keywords=polymaker%2Bmetallic&amp;qid=1709826222&amp;sprefix=polymaker%2Bmetallic%2Caps%2C119&amp;sr=8-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;th=1" rel="nofollow noopener">Polymaker Metallic Blue</a> <a target="_blank" href="https://www.amazon.com/Polymaker-Filament-Metallic-Powerful-Printer/dp/B0B8HVV139/ref=sr_1_1_sspa?crid=3BK880TDO4N3T&amp;dib=eyJ2IjoiMSJ9.b0-g4Mcl8JYROET7fxyRCnCkqje0BrJghW1mGGnCVrjjx6rvls24bgfa99ThpW8p9Qnd8a9zq_68AklG1yj_SfggMEJOjk5utyElOhEvxPHO2B1yQE9NpSWO8TyEaFiwhV6zpZxfSSPlLnPEpzM2y9CWY-D3MrWhm0kvaNxyPDTyey7jaP5YAR-LKdXe14w-MW1ro2XBKlSk1M2o6ivHj95SVGVw_EWSZHfrTW4Hl6k.KVyRs1v985uMh917OskUBiFZqod38BBs0W5iYxteYJ8&amp;dib_tag=se&amp;keywords=polymaker%2Bmetallic&amp;qid=1709826222&amp;sprefix=polymaker%2Bmetallic%2Caps%2C119&amp;sr=8-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;th=1" rel="nofollow noopener">Polymaker Metallic Red</a> <a target="_blank" href="https://www.amazon.com/Polymaker-Filament-Metallic-Powerful-Printer/dp/B09DKQP746/ref=sr_1_1_sspa?crid=3BK880TDO4N3T&amp;dib=eyJ2IjoiMSJ9.b0-g4Mcl8JYROET7fxyRCnCkqje0BrJghW1mGGnCVrjjx6rvls24bgfa99ThpW8p9Qnd8a9zq_68AklG1yj_SfggMEJOjk5utyElOhEvxPHO2B1yQE9NpSWO8TyEaFiwhV6zpZxfSSPlLnPEpzM2y9CWY-D3MrWhm0kvaNxyPDTyey7jaP5YAR-LKdXe14w-MW1ro2XBKlSk1M2o6ivHj95SVGVw_EWSZHfrTW4Hl6k.KVyRs1v985uMh917OskUBiFZqod38BBs0W5iYxteYJ8&amp;dib_tag=se&amp;keywords=polymaker%2Bmetallic&amp;qid=1709826222&amp;sprefix=polymaker%2Bmetallic%2Caps%2C119&amp;sr=8-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;th=1" rel="nofollow noopener">Polymaker metallic silver (flower cup center)</a> <a target="_blank" href="https://www.amazon.com/DURAMIC-3D-Filament-Printing-Dimensional/dp/B07TWDF866/ref=sr_1_1_sspa?crid=IO3RG7ZC7RRV&amp;dib=eyJ2IjoiMSJ9.LLUj_QSyrfsG1ryPQv8xDTx5HTEsGyQ1uk4seEbcdH7gFbge25PlEyLDwUMtATtxGjyWa-LEedwJrcmjsAxUR_ZXf8jx_8ZO_E1ucNJlvSG7gTFzu_7Nt9FdDUwUqJlCHl2GldLY-TALSb62f-tqQJ5V9giLOoiHXh7Y60eRhLbqmEly96-fETxpqKMtp9RnQfkReS6J9wjVidTHINomCQAXRkuDVRCqhHtH8mW8Chc.qZKxABlMbkkMSZCI48aSpHBZD49iSVqAadqVLaHCpEQ&amp;dib_tag=se&amp;keywords=duramic+pla+plus&amp;qid=1709826321&amp;sprefix=duramic+%2Caps%2C120&amp;sr=8-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;psc=1" rel="nofollow noopener">Duramic PLA Pluss black</a>

Mario Kart Coasters Multi material print

Super Mario

Xmas

Recko

<h2>Nintendo 64 Miniature</h2>Little Nintendo 64 with controller and cartridge. Scale is about 1:4.&nbsp;<h4>Universal Slicer Settings:</h4><ul><li>Material: PLA</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.12mm</li><li>Infill: 5% Rectilinear</li><li>No Supports</li><li>May need brim</li></ul>

Nintendo 64 Miniature

Video Games

fay3dlab

I saw πxel8ed version of the suspended millenium falcon and i was inspired to make my own version.. i thought making the ship facing front with the strings looking like the streaking of lightspeed.. the falcon model by aaskedall from thingerverse was already a great design so i just used his model as a remix.. i did have to slightly change the model so it will print for a smaller version for my suspended millenium falcon..&nbsp;UPDATE:I have uploaded a new version model V3 that can be color picked for multicolor printing.. just learned how to do it.. unfortunately i cant edit the old print profile.. so you'll have to add them manually&nbsp;UPDATE 2:I made a LED version of the suspended millennium falcon that is backlite using led strips.. it is an addon part that will connected to the suspended ship.. so you just have to print the addon LED parts only.. not the whole ship.. i've upload the file at <a target="_blank" href="https://makerworld.com/models/113145" rel="nofollow noopener">https://makerworld.com/models/113145</a> <img src="https://makerworld.bblmw.com/makerworld/draft/491035/2023-12-30_4312a40409637.gif">

Suspended Millennium Falcon

kit card

Hamstah

Print-in-place planetary gear spinner. Spins freely straight off the plate.&nbsp;I set up two print profiles for this model: Heavy outer ring - prints using 43g of filament to make the outer ring heavier. This gives it a bit more inertia, but feels heavier in the hand.Light outer ring - prints using 29g of filament. Feels lightweight in the hand and prints faster, but doesn't have as much inertia.&nbsp;Both spin great - I'd say pick the print profile based on how you want it to feel in the hand.

Print in Place Planetary Gear Spinner

Fidgets

Ryschweitzer

A book nook inspired by the Hogwarts Express. I&#39;ve cut the model into pieces for easy printing. I used super glue, hot glue, and some fairy lights to make it stand out. I&#39;ve attached an assembly guide below to help you put the book nook together.&nbsp;*ADDITION*I&#39;ve uploaded a remixed version of the Hogwarts Castle from @Usefulprint to work as a window box.&nbsp;Window Box Hogwarts Castle Extension: <a target="_blank" href="https://makerworld.com/en/models/405431#profileId-307284" rel="nofollow noopener">https://makerworld.com/en/models/405431#profileId-307284</a>&nbsp;&nbsp;&nbsp;