DavidyLorena

Brem95

I modelled this case off of the official files from flipper, it is close to the silicon case that they sell. Print this in TPU and reduce your volumetric output.

Flipper Zero TPU case

flipper zero

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_rk3rntee47nu.png"></figure><h4>Dimensions (LxWxH)</h4>132 x 150 x 32mm (100% scale)<h4>Basic information</h4>The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.<h4>Files information</h4>I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_vigsf58o172r.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_s3a36s7dnq9a.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_iogqewhn95rb.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_gdflo6b9cpom.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_g5kaaodclbq6.png"></figure>If you like my work, and want to support it, you can buy me a coffee at <a target="_blank" href="https://www.buymeacoffee.com/jd3d" rel="nofollow noopener">https://www.buymeacoffee.com/jd3d</a> , so that I can keep my designs free for everyone.

Articulated Sea Turtle (singlecolor and multicolor)

Clara 

angrelou

Update 03/03/2024Thank you all for the support. I uploaded a new design of Darth Vader's signature ship, the TIE Advanced x1.&nbsp;Hello everyone, I know there are already designs for this model, but the reason I created a new design is to make it compatible with color (ams).As you can see, it has a more complete design by having more pieces and details, such as color on both sides of the wings, which makes this design unique.Tips: 1.- Remember to calibrate the bed before making this design. 2.- It is designed to use a bit of force and not require glue.If you liked the design, check out my profile and subscribe, you won't regret it.

Tie Fighter kit card Star wars 

star war

FLOWERS GEAR

“OFFICE” Post-it note Box / OFFICE便利贴盒

oficina 

StlCraft

<figure class="table"><table><tbody><tr><td style="background-color:hsl(0, 0%, 0%);">I have added a version with the heart separated from the body to make it easier for you with printing.</td></tr></tbody></table></figure><blockquote><h3> I'm just getting started, follow me please! </h3></blockquote><figure class="table" style="width:97.18%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="background-color:hsl(0, 0%, 90%);"> 🌟 Welcome to the community! 🌟&nbsp;Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models for a few users?Take advantage of the offer 5 dollars per month for the first 100 users. &nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539553/2024-02-15_77e50735e01fa.png"></figure></td></tr><tr><td><h2><a target="_blank" href="https://www.patreon.com/TinyMakers3D" rel="nofollow noopener">SUBSCRIBE</a></h2></td></tr></tbody></table></figure></td><td style="background-color:hsl(0, 0%, 0%);">&nbsp;New model available visit my profile. I am uploading a model every day. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/539553/2024-02-13_eeca3a450b8c.png"><figcaption><a target="_blank" href="https://makerworld.com/en/models/183775#profileId-202994" rel="nofollow noopener">DOWNLOAD</a></figcaption></figure><figure class="image image_resized" style="width:64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/539553/2024-02-15_ba12aaec748b3.png"><figcaption><a target="_blank" href="https://makerworld.com/en/models/186289#profileId-205080" rel="nofollow noopener">DOWNLOAD</a></figcaption></figure>&nbsp; </td></tr></tbody></table></figure>&nbsp;&nbsp;

♡♡♡  COUPLE IN LOVE for anniversary gift. Elegant and minimalist Home decor

san valentin

hubuki

Sitting Cat Upright

animales 

limpieza 

Chris1974

This is a beer bottle opener shaped like a knuckle duster.&nbsp;Print out the model. It has a slot inside to insert a small coin (designed for 0.05 euro coin)Insert the coin in the slot and you can use it as a beer bottle opener!!! Enjoy!&nbsp;(This is not legal advice, check local laws) Everyone knows it is not smart to carry around a knuckle duster, but it is no problem to have a plastic beer opener.(This is not legal advice, check local laws).&nbsp;Print it very sturdy so it doesn't brake when opening bottles…&nbsp;Print profile has a plain version and a colored version..

Beer Opener knuckle duster

personal

JonnayLin

My wife and I tried making onigiri a little while back but she had trouble forming it right, so I designed and printed out a mold to help her out!Video: <a target="_blank" href="https://www.youtube.com/watch?v=xYvrjWH4Gsw" rel="nofollow noopener">youtube.com/watch?v=xYvrjWH4Gsw</a>

Onigiri Mold

comida

Bexter

Three types of drainpipes for playmobil

drain pipe, water pipe. toy, model toy

fontanería 

3DPrintNovesia

<ul><li>Convert any plastic water bottle into a watering cap or a portable dog shower. Fill your bottle with water, pull the portable outdoor shower lightly on the neck of the bottle, turn it over and press it together.</li><li>Perfect for outdoor use. The portable dog shower is practical when you are out and about with your furry friend. Ideal for your dog or for yourself if nice.</li><li>Perfect dosage: depending on the pressure on the bottle, you can easily dose the water jet.</li><li>Can be used as a hiking shower, camping shower or portable beach shower. Rinses off sand, dirt and mud effortlessly; the shower time is more than a minute with a 2 litre bottle.</li><li>Makes showering your dog quick, easy and more comfortable for your dog to enjoy showering. </li></ul>

Watering Bottle Cap

accesorios útiles

Xeraj

Test model PETG temp tower..3mf file contains encoded temperature changesIt is necessary to download the .3mf file in Raw models&nbsp;<h3>Update:</h3>Instruction:<ol><li>Click on the “Download or Print” button</li><li>Then pick “Download STL”</li><li>Download “PETG_calibration_set_temp.3mf” file</li><li>In Bambu Studio change filament to PETG</li><li>Print.</li></ol>

Calibration Tower PETG

pruebas

TripleGWorkshop

Shout out to PALADINQP for this ridiculously cool model.→ https://cults3d.com/en/users/Paladinqp/creations→ https://cults3d.com/en/3d-model/home/pupa-solar-opposites-free-free-3d-print-model

Pupa from Solar Opposites

solar opposites 

BamBam Design

Mini Bit Tool HandleEasy printable small bit tool handle for normal hexagon bits (¼" ~ 6,35mm).Holes for Magnets Ø6x1mm are integrated. You can simple glue the magnet in if you want.You can choose “Normal Handle and "Extra Grip Handle” with a fuzzy skin.After print it could be a bit tightly, after a few uses it has the perfect fit.😉&nbsp;Happy printing👍&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Mini Bit Tool Handle - Screwdriver

herramienta

update 02/11/2024I uploaded a new model witch solves the problem of the hook breaking when force is applied.Thanks you all for your comments, making this model better for everyone. Download the V 2.0 &nbsp;Lately, I&#39;ve noticed that they always upload the same STL file to all platforms and always encounter the same problem.I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.At the moment, i only created 3 models, but i will be uploading more models soonEnjoy the 3D printAs always, have fun, and I&#39;ll be uploading more things soon.(I recommend using pla+)If you liked the design, check out my profile and subscribe, you won&#39;t regret it.

Toothbrush Travel Case

viajes

iskimo

A box to hold your Wingspan food tokens (including nectar) and eggs. The model uses four 5x1mm magnets for a better fit. It's best to superglue those in.

Wingspan Food & Egg Box

juegos de mesa

Catherine Doucet

<h2>Stay organized with the citrus-shaped pill box, adding zest to your daily routine</h2> <h3>For a more rugged pill box, take a look at my <a target="_blank" href="https://makerworld.com/en/models/171841#profileId-188656" rel="nofollow noopener">UTILITY PILL BOX</a></h3><img src="https://makerworld.bblmw.com/makerworld/draft/495460/2024-02-01_f342925c2943c.png"><figure class="image image_resized image-style-side" style="width:55.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/495460/2024-02-01_60fada3ca7242.png"></figure>

Citrus Pill Box - Orange, Lime, Lemon, Grapefruit

medicinas

Collecticraft

Meet the Minimalist 3D Printed Self-Watering Geometric Planter – a cool and easy way to add style to your indoor or outdoor space. This planter has a unique shape that looks modern and simple, interlocks perfectly without any extra supports messing up its sleek design.&nbsp;Made with strong materials, it's not just nice to look at but also smart. This planter waters your plants all by itself, so you don't have to worry about it. There's a special space inside that holds water for your plants, keeping them happy and healthy.&nbsp;The cool angles of the dodecahedron shape make it look interesting with shadows and light. It's clean and classy, fitting in easily with any room or garden style.&nbsp;This self-watering planter is not just a home for your plants; it's a stylish piece that makes any space look great. Put it on a table, hang it up, or place it on a shelf – it's sure to catch eyes with its unique shape, simple style, and handy watering feature.&nbsp;Say hello to the Minimalist Dodecahedron 3D Printed Self-Watering Planter – a modern, easy-to-use piece that brings nature into your home with a touch of style.

Self Watering Geometric Planter

decoracion

ThomaS

This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling beeds of desiccant out that stuck to the spool when removing it).You will need 2x bases and 4x rods. The bases simply clip together and the rods just sit on top (you can glue the rods to the base, but it's not necessary). Printed in 0.2 mm layer height, 3 perimiters, 25% infill, and no supports. &nbsp;Update 8/1/2024: Added STEP file.

Spool Holder Drybox - Ikea Samla 22L

Para la impresora 

Daniel3D

10.01.23 Update: Due to the change by makerworld, the box was renamed from "Bambu Filament Swatches Rugged Box" to "Filament Swatches Rugged Box". Tags have also been removed13.12.23 Update: Added print plates for one sample (X1,P1,A1)13.12.23 Update: Added new inserts: Non branded, PLA, PETG, ABS, ASA.11.12.23 Update: Added pictures for assembly23.10.23 Update: Added sample23.10 23 Update: New Version of the insert with more space.&nbsp;Rugged box for Bambu Filament Swachtes. All 80 pieces fit exactly into the holder or you can print them out yourself. The file for a sample is included Print with 0.2mm layer, 15% infill.&nbsp;the only thing you need are six M3x30 screws.You simply screw it into the hole provided as shown in the instructions in the picture&nbsp;&nbsp;The latches are redesigned from https://www.printables.com/de/model/39729-tool-box-parametric

Filament Swatches Rugged Box

Varios

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

juguetes

LayerModels

Make your own name or message out of moss using the 3D printed self-supporting moss letters. No need to glue as the structure holds the moss in place. Letters can be displayed on a table or hang on the wall. Reindeer moss is natural and doesn't need any maintenance or watering! The moss can be ordered <a target="_blank" href="https://layermodels.com/pages/moss" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://layermodels.com/pages/moss" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/245576/2023-12-07_268e83c2fab48.jpg"></a>&nbsp;The numbers and symbols package is available for a small fee (less than a coffee!) <a target="_blank" href="https://cults3d.com/en/3d-model/home/moss-numbers-and-symbols-pack" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/home/moss-numbers-and-symbols-pack" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/488752/rich_content/9c5ff40e-e392-463a-8992-7ee80da115ac/thumbs/cover/800x800/png/symbols_2000x2000.webp"></a>&nbsp;Print settingsPrinted in PLA. Standard print profiles will work. Some bridging is required so use sufficient cooling.----------Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

Moss Letters for names

letras

threedee

Just a simple gyro style keychain with spinning moveable heartsI use .2 layer, .4 nozzle and 10% infill with 3 wallsYou can use whatever settings work for you

Gyro Heart Keychain

coche

JSchwieb

Whipped up these Pumpkin Themed Halloween coasters, I have been making them as gifts for friends and family. &nbsp;You can print them either face down or face up depending on what type of texture you want. I use the paint by layer feature to select the first design layer to be a different color. Make sure you're using enough top or bottom layers so that the infill isn't visible!

Spooky Halloween Pumpkin Coasters

divertidas

Marc Elbichon

🐈🐭 There are other variants, checkout <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/528929" rel="nofollow noopener">the entire collection</a>!🎅🦹♀️🧛🧝 Other characters in <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/594647" rel="nofollow noopener">this collection</a> !&nbsp;Update 2024-02-02: V2 - Redraw from scratch, scale up a little bit Jerry for better details, separate stl files&nbsp;I like the original model but add some issues with it, I rework the stl splitting and painting for better result.&nbsp;Simply print and put at a bottom of a wall, shelf, etc.. with a piece of double sided tape

Tom and Jerry Decorative Wall Hole

123cut

Given the fact that I haven't invented anything because I noticed that there are already many similar ones around, I simply created one that suited my needs. I tested this clip for about a month before sharing it here, and it has no issues during printing or calibration. I compared it with some existing models that are equally valid, refining small details. - The new ultra-thin version has no problems during the printing process. - The enhanced versions of the clips ensure better grip and increased durability. Thanks to all your support and suggestions, we have reached the perfect version. Any subsequent changes will be purely aesthetic, and if you'd like, you can also suggest your own design. The most beautiful ones will be featured in the description, and each contributor will be assigned a letter in the print profile.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/518331/2024-02-06_26c1574d6c113.png">

Anti-Dust screen for Stepper Motor

bambulab 

noriwl

A new version of the rick flip off hanger.

Rick and Morty portal hanger decoration split version

rick y morty 

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;