user_2052704866

DrJones

A simple, but flexible spool adapter for the AMS lite and spools with a big inner diameter (~73mm). This adapter is quite flexible and thus fits various spools with slightly different inner diameters around 73mm. &nbsp;This model also comes with a scad file, so you can adapt the adapter to different sizes. The difference between inner and outer diameter should probably not exceed about 30mm though.&nbsp;Printing: use vase mode and a line width of 0.8mm (a 0.4mm nozzle is fine).

parametric spool adapter (AMS lite)

工具

LoFi Layers

Unleash the terrifying power of Venom with this intense Hueforge 3D print! Featuring dark and menacing accents, this artistic interpretation captures the raw and chaotic essence of the Venom symbiote. Perfect for fans of Marvel and unique art styles, this piece will be a standout addition to any collection.&nbsp;Get the <a target="_blank" href="https://makerworld.com/en/models/487611#profileId-400427" rel="nofollow noopener">Hueforge Display Desk Organizer</a> to display your 100x100 prints!&nbsp;Print Details:<ul><li>Dimensions: 200x200mm</li><li>Print Settings: 100% infill with a layer height of 0.08mm and a base layer of 0.16mm</li><li>Min Depth: 0.88mm</li><li>Max Depth: 1.9mm</li><li>Actual Depth: 1.9mm</li></ul>Filaments Used:<ul><li>PLA BambuLab Basic Black: Transmission Distance: 0.3</li><li>PLA BambuLab Basic Gray: Transmission Distance: 2</li><li>PLA BambuLab Basic Jade White: Transmission Distance: 5</li><li>PLA BambuLab Basic Red: Transmission Distance: 4</li></ul>This print uses 4 unique filaments.Swap Instructions:<ul><li>Start with Black</li><li>At layer #11 (0.96mm), swap to Gray</li><li>At layer #13 (1.12mm), swap to Jade White</li><li>At layer #16 (1.36mm), swap to Red for the rest</li></ul>3D printers, you can grab the print profile at <a target="_blank" href="https://makerworld.com/en/@LoFi_Layers" rel="nofollow noopener">makerworld.com/en/@LoFi_Layers</a>.Follow me on Patreon at <a target="_blank" href="https://patreon.com/LoFi_Layers" rel="nofollow noopener">patreon.com/LoFi_Layers</a>.#3DPrinting #Venom #Marvel #Hueforge #3DPrintedArt #CreativeDesigns #HandmadeArt #CustomArt #PLA3DPrinting #MakersGonnaMake

Venom Symbiote Hueforge

毒液浮雕

FYTY112

Project: tailor.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #13 (1.12mm) swap to Jade White for the rest. Do not Adjust Z axis it will ruin the print

taylor swift hueforge

泰勒

Remy DiT

Print layer height 0.08mm / Buse 0.4&nbsp;Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray Dark At layer #15 (1.28mm) swap to Gray Light At layer #21 (1.76mm) swap to White for the rest.

工具

毒液浮雕

泰勒

所有的