MyisSs

Dead Pixel

<h3>Description</h3>A box designed specifically for storing cables. You can choose from one of three sizes. It has a lightweight design and requires only 65g to 85g of plastic to print depending on a size. I recommend to use PETG or PLA+ for better durability. Extended container&#39;s edge prevent cables from slipping out. The box&#39;s dimensions are: 9 compartments - 172mm x 81mm x 60mm (suitable for A1 mini without scaling) 10 compartments - 201mm x 81mm x 60mm 12 compartments - 241mm x 81mm x 60mm If you are looking for a box compatible with Gridfinity try my another design <a target="_blank" href="https://makerworld.com/en/models/510993" rel="nofollow noopener">https://makerworld.com/en/models/510993</a> . I tried to keep the same lightweight concept and combine it with benefits of grid modular system. The boxes from that set are slightly bigger and heavier so it&#39;s up to you to choose which is better for your needs. <h3>Compatibility</h3>This organizer is ideally suited for managing short (up to several meters) flexible cables. It is not suitable for thicker or stiff cables like HDMI, DisplayPort and similar types.&nbsp;<h3>Updates</h3>23.06.2024 - Added variants with 9 and 12 compartments25.06.2024 - Added another design compatible with Gridfinity <a target="_blank" href="https://makerworld.com/en/models/510993" rel="nofollow noopener">https://makerworld.com/en/models/510993</a>

Cable Organizing Box

收纳

casatift

Rain Lamp with LED kit 001下雨灯你可以将他作为你的盲盒手办展示You can use it as your blind box figure display.&nbsp;展示模型照片及配置使用易生PLA matte打印，如果遇到打印有问题，可参考我使用的材料，或者查看评论区看看成功打印所使用的材料。如果偶遇几根断丝，可在打印完成后修剪去除，不影响整体观感。The model photos and configuration shown are printed using ESUN PLA matte. If you encounter printing problems, you can refer to the materials I used, or check the comment area to see the materials used for successful printing. If you encounter a few broken wires, they can be trimmed and removed after printing is completed without affecting the overall look and feel.&nbsp;20240531更新V2版本及缩小尺寸的版本以适配A1 mini。更新优化了伞的高度，观感上更舒适，并增加了伞柄模型。&nbsp;20240531 updated V2 version and downsized version to fit the A1 mini.The update has improved the height of the wing for a more comfortable look and feel, and added a model of the wing handle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479514/design/2024-05-31_d7ae4df15be7d.jpg"></figure>&nbsp;请确定使用Arachne作为墙生成器，并在预览中可以看到拉丝之后再进行打印。放慢速度，加强冷却，以及打开舱门降低热床温度都有助于获得更好的打印效果。Make sure you use Arachne as the wall generator and you can see the strings in the preview.Slowing down, increasing cooling, and opening the hatch to lower the temperature of the hot bed all contribute to better printing results.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479514/design/2024-06-04_664b98e6eef07.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479514/design/2024-06-04_691720f9b0a45.png"></figure>

Rain Lamp with LED kit 001下雨灯（upgraded to V2)

灯具

150x150mm的仓鼠的屋子，粮食盆在二楼，有楼梯，放在角落里非常节省空间，屋内空间比较大，底部空设计，方便清理，楼梯、粮食盆、围栏等使用双面胶等粘上去即可，拆卸方便，经我家仓鼠一点时间使用效果非常好。The room for a 150x150mm hamster has a grain basin located on the second floor and stairs, which are very space saving when placed in the corner. The interior space is relatively large and the bottom is designed to be empty, making it easy to clean. The stairs, grain basins, fences, etc. can be glued with double-sided adhesive, making disassembly convenient. The hamster in my house works very well in a short period of time.

仓鼠屋 家 城堡 有粮食盆 楼梯等 Hamster House（150mmX150mm）

仓鼠

SavageLau

Hey guys, this is my table organizer design for MakerWorld Office helper contest. (3/5)&nbsp;This design have many elements. Please check detail description and print profile break down below:All design is muti-color capable, but takes really long time to print.This design have some big first layer models. Make sure you clean your build plate, and enable bed leveling before prints. Some of the boxes edges might very easy to curve up, if you fail to do so.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_35ec2371ea6de.png"></figure>&nbsp;<h2>Elements:</h2><h3>Tunnel:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_1e83b412309e9.png"></figure><h3>Block box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6d6e9fe944d04.png"></figure><h3>Question box:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_f36ac575df8b9.png"></figure><h3>Star and coin container:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_5810c509a6e7e.png"></figure><h3>Bucket:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-26_d13696b40a3b.png"></figure><h3>Holder 4 & 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_6b8e4c56fd1e2.png"></figure><h3>Drawer 4 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_b9b71497afbdd.png"></figure><h3>Drawer 3 slots:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_be968b6848ba9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_54f4281440f91.png"></figure>&nbsp;<h3>Muti-color:</h3>It is very easy to paint the model. But takes way too long to print, so I did not put it on my printing profile. You can try it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454482/2024-01-17_ce2597d7373d2.png"></figure>&nbsp;<h2>Filaments color: </h2>@dprodriguezf was comment regarding filament colors, here is the lists:Tunnel: Bambu Lab PLA (Green)Coin/Start container: Creality Ender PLA (Skin)Questions box: Sovol PLA (blue)Bucket: R3D UV-color change PLA (Pink)Short block: wood, R3D UV-color change PLA (Purple)Longer block: Giantram PLA (Blue Marbel), Giantram PLA (Matte Terracotta)Drawer 3 slots: Creality HP Series (Matte red)Drawer 4 slots: 3DF (Coral)

Modular Mario desk organizer

储物/整理/收纳

我用铝型材DIY了鞋架，因为没有合适的托板来支撑的我板材所以我画了这个2020铝型材托板，厚度5MM，槽孔宽6.5mm，长12MM，做了加强筋处理更加牢固。 匹配M5/8及以上的螺丝长度。 I DIY the shoe rack with aluminum profiles, because there is no suitable pallet to support my plate, so I drew this 2020 aluminum profile pallet, the thickness is 5MM, the slot width is 6.5mm, the length is 12MM, and the stiffener treatment is more firm. Compatible with screw lengths of M5/8 and above.

2020 Profile Adapter (Pallet) 2020型材转接件（托板）

型材配件

Darren

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;This is an adapter add-on for Autotray for use in the rear passenger seats.  Like Autotray the adapter is designed for durability.  It may take a bit longer to print and a bit more filament but it will last a long time and will withstand use and abuse.&nbsp;The adapter uses a horizontal 12 sided polygon for additionnal angular adjustment in addition to that already provided by Autotray.&nbsp;A must for trips with children and teenagers.&nbsp;Autotray is a a modular tray system for use cars and trucks. You can use it to hold meals, laptops, phone, tablets and many other things.&nbsp;I welcome any comments and suggestions about improving Autotray.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;The link for the 3d model is :&nbsp;<a target="_blank" href="https://makerworld.com/en/models/425827#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827#profileId-329526</a>&nbsp;Autotray Lite - Compact&nbsp;If you want a more compact version of Autotray you can look at Autotray Lite : <a target="_blank" href="https://makerworld.com/en/models/432891?from=search#profileId-337490" rel="nofollow noopener">https://makerworld.com/en/models/432891?from=search#profileId-337490</a>&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000428386/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;

Autotray - Rear seat adapter

车载

Feralghoul

3D printed grips for the GPD Win Mini.

GPD Win Mini Grips

掌机

XH_Lab

<h2>Updated </h2>with a new post-card design to make him more sturdy, universal with older models, you don&#39;t have to re-print all theSwivel base provides internal cable storage space<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000067398/design/2024-05-26_5da56ff7144e6.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000067398/design/2024-05-26_c3cd6822bedef.jpeg"></figure>&nbsp;

Apple Watch Stand compact

手表架子

鸦无量

这是问号砖块机箱的升级套件。我对机箱的散热进行了进一步改良，增加了更多散热孔和风扇位。然后还增加了顶部的提手、两个2.5英寸硬盘位和底部的橡胶脚垫。最终终于达到了一个我个人觉得比较满意的状态。<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_1fa6919ec2d8a.png">新上传的模型文件仅包含改动的部分，剩余模型文件请在我的上一个项目里下载。这是链接：https://makerworld.com/zh/models/166193&nbsp;2024年2月26日更新：我又调整了一下机箱背面风扇和PCI位的位置，以避免产生干涉。请使用最新的“问号砖块机箱_背面_散热增强v2.stl”或者“问号砖块机箱_背面_散热增强v2.3mf”重新打印机箱背面！！！&nbsp;升级后的机箱兼容性：   机箱外尺寸218.4×208.4×198.4mm（9L，含问号）   ITX主板（170×170mm）   散热器限高48mm   双槽全高PCI位   显卡限长183mm   2.5英寸硬盘位2个   Flex电源   5cm机箱风扇位2个   12mm开机按钮（开机线）<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_c2b51fd4a96f78.png">新增的可选配件：   硬盘支架   提手   橡胶脚垫<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_a2f0b89581e698.png"><img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_183014ad23b808.png">升级后的所需的五金配件：   M3×10沉头内六角自攻螺丝（机箱各个面连接用）    M3×12沉头内六角自攻螺丝（机箱各个面连接用）    M3×14沉头内六角自攻螺丝（机箱各个面连接用）    M3×14沉头十字平尾自攻螺丝（机箱各个面连接用，隐藏螺丝）    M3×8大扁平头十字自攻螺丝（固定主板用）    M3×5×7圆头带垫十字螺丝（PCI位）    M3×4×5铜嵌件螺母（PCI位、提手T形螺母用）   M4×30×8扁平头十字螺丝（固定机箱风扇用）   M4.5×12圆头十字平尾自攻螺丝（固定机箱风扇用）    M4蝶形螺母（固定机箱风扇用）   M4×10圆头十字平尾自攻螺丝（固定橡胶脚垫用）   19×15×11橡胶脚垫（机箱脚垫）&nbsp;说明视频：<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1Jy42187PP/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1Jy42187PP&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1Jy42187PP&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Mario Question Block ITX Case Upgrade Kit|马里奥问号砖块ITX机箱升级套件

ITX机箱

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

玩具

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Spinning Filament Swatch Display - Lifts Swatches

工具

jimdt7

Introducing a custom-designed model inspired by the IKEA Skadis system! This custom pegboard is 23 by 23cm and boasts a versatile 6x6 grid of peg inserts, ideal for organizing spaces with precision and style. This model is also fully compatible with both original IKEA Skadis accessories and 3D printed accessories.&nbsp;Engineered for easy installation, the board features four corner holes perfectly sized to accommodate screws with diameters up to 6mm, ensuring a secure and hassle-free mounting process on your wall.&nbsp;For added convenience, an accompanying second file includes a specially designed spacer. This 1cm spacer facilitates a seamless fit between the pegboard and the wall, optimizing functionality and allowing for effortless customization of your storage and organization setup.

Ikea Skadis Pegboard 23x23cm

洞洞板

VRsculpts

A cute simple baby octopus with a crochet/knitted look. Keychain file as well as a 3 inch figurine without the keychain hole included in the print profiles. Easy print with minimal color changes, print them in several different colors!&nbsp;The angry octo is based on Dirty Heads “shocktopus” and was originally released via my Patreon but has since been moved to my “vault” on Cults3D.  Joining my Patreon will give you a 50% off coupon code to use on any of my Cults3D files to allow you to purchase previous months models no longer available on the Patreon:https://cults3d.com/en/3d-model/art/crochet-pokemon-mario-vrsculpts-dec-2023-patreon-releases

Octoplush - Amigurumi Baby Octopus Keychain

钥匙挂件

DesignAndMakeIt

注意：<ol><li>该模型榫卯的孔是5mm的，插销是4.8mm的；</li><li>模型榫卯处没有留空隙，受打印精度影响比较大，建议加好支撑，调好机器，不然可能会很难安装；</li><li>模型需要把机器放进去再安装，模型安装好之后，机器拿不出来，也放不进去；</li><li>耗材安装时需要把AMS抬起来一点；</li><li>安装榫卯时，可以把架子放在地上，一只手用力往下按压，另一只手塞插销进去；</li></ol>AMS Lite干燥箱，A1 Mini可打印， 使用磁吸开门&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/293925/2023-12-14_ac583aee4aa99.jpeg">&nbsp;&nbsp;使用榫卯的方式连接&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/293925/2023-12-14_65597e0d782fd.png">&nbsp;另外需要：亚克力板 200*470*5 mm 2块， 200*240*3mm 2块， 238*468*3mm 2块磁吸条 10*2mm 10米气管接头 PU-4 4个变色硅胶干燥剂胶水

AMS Lite Dry Box 干燥箱

3d打印机配件

Štístkáč

This 3D model is a reindeer designed with a Voronoi pattern, which gives it a modern, cellular look. It's perfect for festive decoration or as a year-round piece of art.<h3>Detailed Description and Usage</h3>The Voronoi Reindeer model is a delightful blend of natural inspiration and contemporary design. With its intricate Voronoi pattern, it captures the essence of a reindeer in a stylized, abstract way. This model can serve various purposes:<ul><li>Holiday Decor: It's a unique addition to any holiday display, especially for Christmas.</li><li>Educational Tool: Great for teaching about Voronoi diagrams in math or design classes.</li><li>Gift: A thoughtful present for those who appreciate modern art or are fans of wildlife.</li></ul><h3>Recommended Colors and Other Essential Information</h3>While the natural white color gives it a minimalist and snowy feel, you can also paint it to match your style or the holiday theme—think traditional brown with a red nose for a Rudolph twist or metallic colors for a modern look. If you're new to painting 3D prints, acrylic paints with a primer can work well.

Voronoi Reindeer

精美摆件

Need4Speed

Cute Snowman mold to make some little snow-friends.&nbsp;You can adjust it's size in Bambu Studio

Snowman Snow Mold / Maker

雪地玩具

T3D Objects

Flowers plant pot

花盆

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

收纳

灯具

仓鼠