user_1995650133

达文西FPV

关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！<ul><li>Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!</li><li>Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!</li><li><a target="_blank" href="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili</a></li></ul><figure class="media"><oembed url="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure><a target="_blank" href="https://www.douyin.com/user/self?modal_id=7369237370975096118" rel="nofollow noopener">达文西FPV的抖音 - 抖音 (douyin.com)</a>

My Neighbor Totoro Bus龙猫巴士

home

Per Mejdal Rasmussen

Cable extension box using the WAGO 221 inline splicing connector.&nbsp;Benefits<ul><li>Compact.</li><li>Very strong strain relief.</li><li>Mountable with countersunk screws.</li></ul>How to make<ul><li>Print in PETG, because it is more fire retardant than ABS or PLA.</li><li>Insert WAGO 221-2401 or WAGO 221-2411 inline splicing connector.</li><li>Secure with M3 screws and nuts. Suggest screws are 14mm with hex head.</li></ul>If this model useful for you, please support me by clicking on the “Boost” button above.<ul><li>At 100 boots, I will make and release a model that can split the connection.</li></ul>&nbsp;Video:<figure class="media"><div data-oembed-url="https://youtu.be/SfNtMvaK5H4?si=KGLEgdQbKCcScEe7"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SfNtMvaK5H4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Extension box for WAGO 221 splicing connectors

hardware

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

garden

Longracks Labs

5 inch sanding disc holder with grit labels. If you need to modify the labels you can copy and remix on <a target="_blank" href="https://www.tinkercad.com/things/0y8UUHFgj3H-glorious-gaaris-robo/edit?returnTo=%2Fdashboard" rel="nofollow noopener">Tinkercad</a>. I printed this with no supports and it did pretty good, a few strands loose that I cleaned up with a shart knife. I am happy.

5 inch sanding disc holder with grit labels

wood shop 

<h2>Gridfinity 2x2 holder for hex screwdriver bits from printables</h2>

Gridfinity 2x2 holder for hex screwdriver bits

gridfinity

jfalk54

Goes from 1/8" to 1" see image for list of all sizes. Perfect for a multicolor print!