user_1976476427

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

Toys

3D servis

Stackable organizer for small things (140x160mm)Inside height 26mm, 37mm, 48mm&nbsp;Bigger size is here: <a target="_blank" href="https://makerworld.com/en/models/201543" rel="nofollow noopener">https://makerworld.com/en/models/201543</a>&nbsp;

Stackable organizer for small things (140x160mm)

Organizers

SmashD

If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! Slice it, print it, done.&nbsp;&nbsp;If you are not using the one-click printing method, or are not using a Bambu printer, read on:<h4>Print Instructions (manual settings):</h4>print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;<h4>Filament Swaps:</h4><ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Fire Engine Red</li><li>At layer #15 (1.28mm) swap to Beige</li><li>At layer #24 (2mm) swap to White for the rest.</li></ul><h4> Filaments I've used:</h4><ul><li>Black: <a target="_blank" href="https://amzn.to/486FCDo" rel="nofollow noopener">Extrudr PLA NX2 matt schwarz</a>*</li><li>Fire Engine Red: <a target="_blank" href="https://amzn.to/42yHYtu" rel="nofollow noopener">PLA+ Esun Fire Engine Red</a>*</li><li>Beige: Bambu Lab PLA Basic “Beige”</li><li>White: <a target="_blank" href="https://amzn.to/4blLxaA" rel="nofollow noopener">Extrudr PLA NX2 matt weiß</a>*</li></ul>&nbsp;Notes:<ul><li>*The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)</li><li>I am not affiliated with the Coca Cola Company or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.</li></ul>

Coca Cola Coasters - Vintage (incl. Holder)

Coasters

izboxo

Print in place, works after you get it off buildplate. Print this brainteaser and have fun with your friends! Challenge them who can build it faster!NOT EVERYONE CAN BUILD IT! I've printed it for my grandma, she's been strugling with it all day then I've came to rescue her. :D&nbsp;Cube can be printable in multicolor or single color. (Multicolor looks better :D)

Cube Chain Brain Teaser

Fidgets

TrocheHole

<figure class="table" style="width: 100%"><table style="background-color: #f5f5f5; border: 12px solid #f5f5f5"><tbody><tr><td><figure class="image image-style-side"><a href="https://makerworld.com/models/459303" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-05-10_145eb9783fdb7.jpg"></a></figure><h3>[Information]</h3>The LID model designed specifically for the basket has also been released for this &#34;Purge Chute &amp; Basket&#34; model.<h3><a target="_blank" href="https://makerworld.com/models/459303" rel="nofollow noopener">Visit this link to download.</a></h3></td></tr></tbody></table></figure>&nbsp;<h2>Description</h2>The magnetic Chute &amp; detachable Basket for the poop purged from the X1C, P1S, and P1P.Both the Chute and Basket are easily detachable, but they are also securely attached to prevent accidental movement.The use of the Fixture (the light gray part in the photo) is strongly recommended, as it is very effective in preventing the Chute from shifting.Please also check the photos and print profile for additional information.&nbsp;&nbsp;<figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_fb8010ae2dc76.jpg"></a></figure><figure class="image image-style-side"><a href="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg?image_process=format,webp" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000201311/design/2024-06-14_0c093a9de20f.jpg"></a></figure>──────────<h2>Update</h2><h4>[ June 14, 2024 ]</h4><ol><li>“Fixture2”, which allows stable installation of the Chute without magnets, has been added. (*It can also be used with magnets.)</li><li>As requested, the “Extra-Short” size basket has been added.  </li></ol><h4>[ April 7, 2024 ]</h4>New sizes have been added to the basket model.<ul><li>Short</li><li>Medium (*original size)</li><li>Long</li><li>Wide</li></ul>──────────&nbsp;<h2>Printing Tips</h2>No supports are needed. But, the overhang angles of the Chute and Basket are 30 degrees.If you are using a filament that is NOT good at printing overhangs, please enable support settings yourself.&nbsp;<h2>Compatible Magnet Types (for the Chute)</h2><ul><li>DIA 13mm x T 2.5mm</li><li>DIA 12mm x T 3mm</li><li>DIA 12mm x T 2mm</li><li>DIA 10mm x T 3mm</li><li>DIA 10mm x T 2mm</li><li>DIA 8mm x T 3mm</li><li>DIA 8mm x T 2mm</li><li>DIA 6mm x T 3mm</li><li>DIA 6mm x T 2mm</li><li>No Magnets</li></ul>&nbsp;

[ Jun.14 ] Poop Chute & Basket for X1C/P1S/P1P

Printer Accessories 

Codyinbody3

I'm a big Jordan fan so I thought I'd make this fan art into a lamp for others to print. Enjoy!

Air Jordan LED Lamp

Lightbox

Nigh87

Gengar figure

Pokemon

HG_Design

Easter surprise eggsEaster eggs to put surprises inside.Designed 80mm high to be printed in two parts.Hope you like it.

Easter surprise eggs

Holiday

JabHook

*UPDATED FILE 3-7-2024&nbsp;I have worked on this model since it was placed here and am releasing version 2 - The lid has a major update where it now will snap together which enables the tumbler to have a nice clean look and the lid fits flush with the cup brim.  tree supports are added where needed.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_cc0b77770ff58.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/658611/2024-03-07_0a351c94d6685.jpeg">Assembly for the lid -  grab a small pliers and remove the little support under the middle of the top lid piece.  place a small dab of glue in there and snap the bottom part of the lid to that.  let it dry and you are all set to go.&nbsp;&nbsp;Here is a replica of the famous Stanley tumbler but in a keychain version.There is storage inside so you can keep your daily pill(s) if you are on the go, a folded bill (money), earrings, or other small items.&nbsp;Have fun!

Tumbler keychain - Stanley version, storage inside for pills, cash, or small item

Keychain

3DXAV

Check my video:<a target="_blank" href="https://www.instagram.com/reel/C35IsrrrZqr/" rel="nofollow noopener">https://www.instagram.com/reel/C35IsrrrZqr/</a><a target="_blank" href="https://www.tiktok.com/@3dxav/video/7340605163985456390" rel="nofollow noopener">https://www.tiktok.com/@3dxav/video/7340605163985456390</a><figure class="media"><oembed url="https://www.youtube.com/shorts/6yWw4YdneCw"></oembed></figure><figure class="media"></figure>Other videos:<a target="_blank" href="https://www.instagram.com/reel/Cx_ftW2PEmj/" rel="nofollow noopener">https://www.instagram.com/reel/Cx_ftW2PEmj/</a> I decided to embark on the challenge of creating a functional prototype of an Airless Soccer Ball, specifically designed for 3D printing. My goal was to develop a model that not only replicated the essence of the original design but also offered significant improvements in terms of durability and performance.&nbsp;Incorporating the design principles of the Airless Basketball, I immersed myself in the modeling process to adapt them to the context of Soccer. The result was an innovative prototype that challenges the traditional conventions of soccer balls, eliminating the need for inflation and providing a more consistent and reliable gaming experience.&nbsp;My Other Airless Models:<ul><li><a target="_blank" href="https://makerworld.com/en/models/141676" rel="nofollow noopener">AIRLESS BASKETBALL V2</a></li><li><a target="_blank" href="https://makerworld.com/en/models/141620#profileId-244813" rel="nofollow noopener">AIRLESS BASKETBALL V1</a></li><li><a target="_blank" href="https://makerworld.com/en/models/223516" rel="nofollow noopener">AIRLESS AMERICAN FOOTBALL</a></li></ul>&nbsp;&nbsp;<h2>SUGGESTED MATERIALS: I have already seen many impressions of my Airless Ball&#39;s prototype and I can list the filaments with the best results in rebound and resistance:</h2><ol><li><a target="_blank" href="https://www.kimya.fr/en/product/3d-peba-s-filament-kimya/" rel="nofollow noopener">KIMYA PEBA-S</a> (personally tested) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-06-21_e9475b9e75071.gif">  </li><li><a target="_blank" href="https://www.amazon.com/FLASHFORGE-Flexible-Printer-Filament-Spool/dp/B09V7HXGKR?ref_=ast_sto_dp&amp;th=1&amp;psc=1" rel="nofollow noopener">FLASHFORGE Flexible PLA</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-09_2003d59356e57.gif">  </li><li><a target="_blank" href="https://ataraxiaart.com/?product=ataraxia-art-flexible-pla-filament-1-75mm-3d-printer-filament-1kg-spoolbetter-than-tpu89a-shore-hardnesspatent-formulacompatible-with-bowden-extruderwith-filament-storage-bag-fpla-slate-gray" rel="nofollow noopener">ATARAXIA ART</a> Flexible PLA  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-05_a5f624f4dcfe3.gif">  </li><li><a target="_blank" href="https://www.sainsmart.com/products/gt-3-flexible-pla-filament" rel="nofollow noopener">SaintSmart GT-3 High Flowability Flexible PLA Filament</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-02_61bab51abbecc.webp">  </li><li><a target="_blank" href="https://spool3d.ca/flexible-pla-1-75mm-3d-printer-filament/" rel="nofollow noopener">Spool3DCA PLA Flex</a> <a target="_blank" href="https://spool3d.ca/flexible-pla-1-75mm-3d-printer-filament/" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-02_8be1955631815.gif"></a>  </li><li><a target="_blank" href="https://overture3d.com/collections/overture-super-pla" rel="nofollow noopener">Super PLA + Overture</a> Super PLA+ by Overture excels in printing smaller ball versions, avoiding fracture risks. Its excellent bounce makes it perfect for smaller models, offering enhanced durability and fun. In larger models, it may encounter strength issues, only print small. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-06_f6d89282f7fd7.gif">  </li><li><a target="_blank" href="https://www.kimya.fr/en/product/3d-filament-tpc-91a-kimya/" rel="nofollow noopener">Kimya TPC -91A 3D</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000208034/design/2024-03-13_5900a9186ebb3.webp"></li></ol> Disclaimer: None of these brands sponsor me&nbsp;&nbsp;Precise Dimensions: The ball&#39;s design is based on precise dimensions, matching those of a size 5 soccer ball (21.65cm in diameter), ensuring consistency and adhering to the standard dimensions of a full-size soccer ball. Scale if you wish&nbsp;Authentic Details: All characteristic elements of a soccer ball have been integrated, including hexagonal and pentagonal panels, as well as stitching details, to achieve an authentic and recognizable appearance.&nbsp;Uniform Surface: The model&#39;s surface has been precisely designed to ensure high-quality 3D printing and a smooth finish, without imperfections or deformities, contributing to an optimal gaming experience.&nbsp;3D Printing Optimized Design: The ball&#39;s design has been optimized for 3D printing, minimizing support areas and overhangs, facilitating the printing process, and reducing the need for post-processing.&nbsp;Ready to Print: No assembly is required, as the ball is designed as a single piece, ready to be 3D printed directly, simplifying the process and ensuring faithful reproduction of the original design.