0.16mm layer, 2 walls, 15% infill

Three styles, same profile, pre-plated

0.16mm layer, 2 walls, 15% infill

plate 1: Print in parts, do not arbitrarily adjust the position; plate 2: 0.12mm layer height

0.2mm layer, 2 walls, 15% infill

39mm wide Mounting Base

Increase wall thickness and infill density as appropriate

layer height below 0.16mm, do not adjust placement direction or modify supports

0.16mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 100% infill

Character Angle Correction Version

0.28mm layer, with brim

Do not arbitrarily adjust the bottom surface, as this will reduce the strength of the stressed surface

Bottom Cover (Reinforced Snap Version)

Reinforced top and bottom, resistant to deformation

All on a single plate, color separation requires manual adjustment of positions

pre-plated, only one top plate needs to be printed, the box is optional to print.

All variations on a single plate, print what you choose

Base (can be scaled appropriately to fit different razors)