user_1951307420

MingGY

这只金鱼的全身由许多铰链连接，因此可以灵活运动。需要注意的是，正如实拍图所示，这只金鱼仅展示了上半部分，并不是一条对称的金鱼的一半。因此，你无法通过打印两次将其拼合成一条完整的金鱼。当然，如果大家更喜欢完整的金鱼，我后续也可能会制作一些可以拼合成完整金鱼的3D模型。敬请期待！&nbsp;This goldfish&#39;s entire body is connected by many hinges, allowing it to move flexibly.It&#39;s important to note that, as shown in the actual photos, this goldfish only showcases the upper half and is not a symmetrical half of a complete goldfish. Therefore, you cannot print it twice to assemble into a complete fish.Of course, if everyone prefers a complete goldfish, I may consider creating some 3D models that can be assembled into a complete fish in the future. Stay tuned!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451918/design/2024-05-03_5f27e19f50625.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451918/design/2024-05-03_d2bb78969e866.jpg"></figure><figure class="image"></figure>

flexi goldfish

for Alice

cyanidesugar

Can it do the Kessel Run in 12 parsecs? Who knows?! &nbsp;This is a fairly simple print-in-place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises 4 filament colours, 3 for the Hueforge print, and one for the Millennium Falcon. &nbsp;If you are using the one-click 3MF file on Makerworld, all appropriate settings have been applied to the print. If you are not using the one-click printing method, or are NOT using a Bambu printer, see the print instructions below: &nbsp;Print Instructions: <ol><li>Print the hueforge print (0mm - 2.08mm) at 100% infill.</li><li>The Millennium Falcon portion of the print (2.08mm - 80mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm.</li><li>You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-80mm.</li><li>You do not need any supports for this print. </li><li>I used Burnt Titanium as the background for the print, but you can use any variation of a dark or black colour.</li><li>I used Polymaker's Starlight Mercury for the Millennium Falcon, but you can use any gray or silver variant, or whatever you like!</li></ol>Filament Swaps: &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;Filaments Used: - PLA Flashforge Burnt Titanium Transmission Distance: 2.5 - (You can use black!) - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8- PLA Polymaker Starlight Mercury (This is for the Millennium Falcon!)&nbsp;Swap Instructions: - Start with Burnt Titanium - At layer #7 (0.68mm) swap to Teal - At layer #11 (1mm) swap to White- At layer #23 (1.96) swap to Starlight Mercury (this is the Falcon!)&nbsp;The wonderful Millennium Falcon model was sourced from <a target="_blank" href="https://www.printables.com/model/212461-fillenium-malcon-improved" rel="nofollow noopener">here</a> by <a target="_blank" href="https://www.printables.com/@Gareth42_280557" rel="nofollow noopener">Gareth42</a>. If you haven't yet, you should definitely print the standalone model, because it it marvellous! &nbsp;Have fun, and let me know how you go with the print! &nbsp;____________________________________ Commercial License to Sell PrintsIf you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my <a target="_blank" href="https://patreon.com/cyanidesugar3DP?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener">Patreon</a>! ____________________________________&nbsp;

for Alice

space