user_1930650783

wuguigui

Updated 20240520Someone asked for the extra height of the lamp, so I added a part called&#34;Icosahedron-Pole Extra height&#34;, you can choose to add 1, 2, or 3… of these parts, but be careful of the strength and the center of gravity. The print profile was added as well.__________________________________________________________________________________________________________________________&nbsp;Updated 20240407After using the lamp for some time, I found the Pole parts started to incline, the bottom of the pole was too weak to hold the weight of the lamp, so I modified the shape of the pole&#39;s bottom&amp;leg parts as the image shows, shorten the hanger part, now this issue should be fixed.The parts&#34; Icosahedron-Hanger&#34;, &#34;Icosahedron-Pole Bottom&#34;, &#34;Icosahedron-Pole Leg01&#34;, and &#34;Icosahedron-Pole Leg02&#34;  were replaced in this upgrade, and these parts in the print profiles were replaced as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-04-07_57daeaf83d776.png"></figure>__________________________________________________________________________________________________________________________&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;This is an Icosahedron lamp designed for <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">Bambu Lab LED Lamp Kit 001</a> , I designed a pole hanger to hold it, so you can put it beside your computer or bedside as a night lamp.It can be built in 3 types, you can also try to make a different lamp for yourself.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>Recommended filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambu PLA Tough</a>, <a target="_blank" href="https://shrsl.com/4duvh" rel="nofollow noopener">Bambu PLA-CF</a>, or other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>The models can be separated in Bambu Studio, so you can make the shell and the back side in 2 colors. Because the white shell version is easy to leak the back color, so I made different parts for the white shell. You can download the parts name with &#34;White shell&#34;, If you want to print a white shell lamp. All parts can be printed without supports, the pole parts need a raft to make them stable on the board.这是一盏可使用拓竹LED模组的正二十面体吊灯，可自由组合拼接，正反面双色打印。白色款由于容易透出背部的颜色，专门做了与黑色款不同的模型，请选择文件名带有”White Shell&#34;的模型打印。所有部件可无支撑打印，灯杆打印时底部需加至少两层衬垫（Raft)，建议模型与衬垫距离设为0，以保证稳固，打印后切除底部残余衬垫即可。安装说明见以下图片，其他详情见<a target="_blank" href="https://www.bilibili.com/video/BV1rC4y167s8/?spm_id_from=333.999.0.0&amp;vd_source=ddcaa334bf40e5b233718d3c3f743c02" rel="nofollow noopener">B站视频</a>Watch the video to get more information.&nbsp;Assembly instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_369dcb1e0eea4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_6bca9810c5931.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a6097df6bc009.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_a2772edf695be.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_668d16c5e68ff.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_031c1a8499649.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_2e88e08ac77a4.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_05fe0c50d5c13.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_b175560990aa4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000162037/design/2024-01-29_c82d75e94cf9f.jpg"></figure>Click &#34;Like&#34; if you like it, feel free to boost me or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&amp;locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a>, thank you! Have fun!If you want to sell the printed model, you need a Commercial license at: <a target="_blank" href="https://www.patreon.com/wuguigui/membership" rel="nofollow noopener">https://www.patreon.com/wuguigui/membership</a>&nbsp;

Icosahedron Lamp for LED Lamp Kit 001

JDJDJD

The Smoothy Mount is the official mount designed for use with the <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">Smoothy PTFE Bowden Y Connector</a>. The Smoothy allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;The Smoothy can happily rest inline without a mount which has some advantages, but some users have requested a mounting method so I'm delivering for you!&nbsp;The Smoothy Mount features a universal mounting design so it can be used with either an M3x8mm screw or magnets.&nbsp;Having the mount separate allows for easy removal of the Smoothy without removing fasteners like screws, etc.&nbsp;I've designed a couple images with placement ideas but the location and method is up to you.&nbsp;The screw mount is most secure, while the magnets allow for more flexible placement. On the X1C, the screw hole closest to the outside edge of the machine works best.&nbsp;Several magnet sizes are now supported for flexibility (see files). The magnets need to be fairly strong. If you don't have strong magnets, I recommend the screw mounting method.&nbsp;The Smoothy Mount is compatible with Smoothy models that have flanges at both ends, which includes:<ul><li>Smoothy V2 PC4-M6</li><li>Smoothy V2 PC4-M10</li><li>Smoothy V1 PC4-M10</li></ul>If you have a Smoothy V1 M6 with no flange, simply upgrade to a Smoothy V2 and you'll be good to go!<h2>FEATURING:</h2><ul><li>No Supports</li><li>No Brims</li><li>No Overhangs</li></ul><h2>NOTES:</h2>I printed all tests successfully with the following:<ul><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Walls: 4+</li><li>Infill: Gyroid</li><li>Brims: Disabled</li><li>Supports: Disabled</li><li>Orientation: Vertical, wide side down</li><li>Glue Stick: Yes</li><li>Bambu Lab X1C</li><li>Cool Plate</li></ul><h2>UPDATES:</h2><ul><li>Support for several new magnet sizes has been added!</li></ul>The Smoothy can be used commercially, but can't be resold.&nbsp;Enjoy!&nbsp;Download The Smoothy PTFE Bowden Y Connecter here: <a target="_blank" href="https://makerworld.com/en/models/18174" rel="nofollow noopener">https://makerworld.com/en/models/18174</a>

灯

P1S