勤奋的钬钬

jeepboy5

This is my first upload (please be gentle). This is a mini version of a croc (right) shoe. I recommend TPU but I guess others could work also. it is a pain removing support from bottom but on the other hand the rough surface will give you better traction when you put your crocs in 4 wheel drive. Enjoy!!

Crocs Keychain

l'l'IllI

橙豆造物

作者的版本需要大量胶水，但是我比较懒，不喜欢用胶水，所以做了这个没有胶水的版本。但是需要一些支撑，这个支撑拆除也非常简单大概需要30秒时间就能拆除完。请放心打印，预留的洞是为了方便拧螺丝预留的，总共两个版本，一个版本需要少量胶水，一个版本不需要胶水，这个可以根据自己的需求做选择。&nbsp;The author&#39;s version requires a lot of glue, but I&#39;m lazy and don&#39;t like using glue, so I made this version without glue. But it requires some support, and the removal of this support is also very simple and takes about 30 seconds to remove. Please feel free to print. The reserved holes are reserved for the convenience of tightening screws. There are two versions in total. One version requires a small amount of glue, and one version does not require glue. You can choose this according to your own needs.

For Endless Loop Express Glue-free，小火车轨道无胶水版本

环游火车

user_4109525575

两只抱着爱心的皮卡丘，一公一母，高度100MM，适合作为情侣桌面摆件，淘宝目前没有同款在售。Two Pikachu holding hands, one male and one female, with a height of 100MM. They are suitable for being desktop ornaments for lovers. Currently, there is no similar product available on onlineshop.

two love pikachu 公母皮卡丘相恋

多色

PartyLime

GEN 12: please see my profile for the GEN 12 ball. There&#39;s a limit of 500mb on one page so I had to make another for the latest Gen. It bounces really well and feels super durable in TPC I wasn&#39;t satisfied with the current models of the airless basketball on here as they only had a single lattice. This took me days make sure the double lattice worked in CAD - SolidWorks was not built for this! As I don&#39;t have $2,500 to spare, I worked from the images available online.I printed it in TPU. It doesn&#39;t bounce as much as a standard basketball in TPU so I suggest a stiffer material.&nbsp;GEN 9: I have added a gen 9 version. It is a little closer to the original and should weigh about the right amount when printed in TPU/PLA&nbsp;GEN 10: I have adjusted the size of the hex holes and increased the filled on them. I&#39;ve also increased the lattice thickness to 8mm to hopefully increase bounce. The logo on the top and the airless gen 10 tag have also increased in size a little to improve how they look. Lastly, the holes around the seam are now pentagons as in the original ball&nbsp;GEN 11: I have added a new version with cut-outs throughout the seams. This will hopefully make the bounce more consistent.&nbsp;The original version I uploaded was removed due to “abnormal download data”. MakerWorld support took all my points but said I could re-upload so here it is again. Hopefully that won&#39;t happen again. MATERIALS:Extrudr Hard TPU (58D) - good durability about 40% bounceOverture Super PLA+ - 100% bounce but broke easilyOverture easy nylon (PA6) - broke almost instantly (the community have suggested “annealing” the print in water to increase durability)BASF Forward AM Ultrafuse TPU 64D - good durability and 60% bounce (BEST SO FAR)BASF Ultrafuse TPC 45D - good durability and great bounce. I recommend annealing this one at 110°C for 10 hours at least.

Airless basketball

BALL

sipura

&nbsp;Hello everyone, &nbsp;We made a new model, A1 mini kit card, so now you can make your own A1 mini 3d farm :D&nbsp;You have two kit cards, so you don't need AMS to print.One for white, and the other for gray or black (your choice).We printed them in both combinations and we can't decide which one is prettier.&nbsp;Clean the bed plate well because there are parts that are very thin, such as "cables", so that you have no problems with printing.&nbsp;Normally, very simple printing and very simple assembly.It is recommended to glue all parts.&nbsp;&nbsp;In the video below, a short overview of how to assemble the A1 mini&nbsp;<figure class="image image_resized" style="width:90.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/573937/2024-02-23_cb796ffb8d98f.gif"></figure> ENJOY PRINTING :D&nbsp;

l'l'IllI

环游火车

多色

BALL

打印机