3Design

CoNcLuZiOn

<h4>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</h4><h4>Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #19 (1.6mm) swap to White for the rest.</h4>

Bookmark - ballerina HUEFORGE AMS

book stuff

Sakul

🍦Pop &amp; Catch Toys Ice Cream Cone🍦 The Pop and Catch Ice Cream Toys are the perfect pastime activity for a beach days or playing in the garden! These Pop &amp; Catch launchers are designed to resemble colorful ice cream cones can be used with normal platic balls like a ping pong ball or even with a 3d printed version. For assembly, put the cage on top and twist, for the launch mechanism you need a rubber band, use a shorter one for more power. The Flipper is inserted from the side of the cone and clipped into postition, now hook the rubber band in place, there are different options to do this, depending on the length of your rubber band. Have fun!

Pop & Catch Toys Ice Cream Cone

toys

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

power generation 

RealNationPrint

Personal Brick Generator  Create your own Brinkset! Just set your variables export it and print so many bricks u like in  any kind of Color u want!  Choose your kind of Brick: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_796dff4e9d569.png"> Change your Scale Parameter:  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_49f47690f88ab8.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_14b701c97ddee.png">&nbsp;Download the MF3 and print them! Bottomside to the plate!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_3a256e13e3554.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_bfa3808e99d118.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476736/design/2024-05-29_60cf87f099cd58.png"> Visit my other Model <a target="_blank" href="https://makerworld.com/en/@RealNationPrint/collections" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint</a>I&#39;d appreciate a like/follow or Boost and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Personal Brick Generator 

lego

Markury

I saw a tiktok with a keyboard that was all ducks and I had to have one. This one is only suitable as an escape key or similar since they don't like to sit next to each other. Edit: An experimental “v2” version is provided that has enough clearance for multiple ducks to sit next to each other. Still, this version does not address that keys interfere with each other in adjacent rows. I did make an updated version, and it's available for purchase on the orange website that starts with a “P” on my profile, Markury.&nbsp;Please share your makes. Happy printing!&nbsp;Note: My print preset has supports under the beak with support blockers inside the keycap. You might be able to get away with no supports if you slow it down enough.

Ducky Artisan Keycap (AMS)

key caps

DonMatis

Since doing some redecoration to my living room, decided to make a unique collection of filament paintings (hueforge), base and holder to create your own unique coaster set. My choice was one of each but you can mix and match to create your own favourite set.&nbsp;The holder can hold up to 6 coasters. For each coaster you will need to print one base and glue them together with a super-glue.&nbsp;Coaster Base / Coaster HolderPrint these with 0.20 layer height and about 10-15% infill. You will need to print one Coaster Base for Each Coaster and one Coaster Holder&nbsp;<h4>Filament Paintings</h4>All Hueforge/Filament Paintings, you can print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm and use a tight brim to keep them on printer table and avoid wrapping.&nbsp;Microworld<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_631kq738owln.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #5 (0.48mm) swap to Gray</li><li>At layer #10 (0.88mm) swap to Light Gray</li><li>At layer #16 (1.36mm) swap to White for the rest.</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;SpiderWeb<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_ehl2zljrpt71.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #4 (0.4mm) swap to Gray</li><li>At layer #10 (0.88mm) swap to Gray</li><li>At layer #17 (1.44mm) swap to White for the rest.</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Faces<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_egssllt4onye.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #5 (0.48mm) swap to Gray</li><li>At layer #10 (0.88mm) swap to Light Gray</li><li>At layer #18 (1.36mm) swap to White for the rest.</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Robot Face<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_059vamrm6172.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #5 (0.48mm) swap to Gray</li><li>At layer #9 (0.88mm) swap to Light Gray</li><li>At layer #16 (1.36mm) swap to White for the rest.</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Smile<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_pxfee0mwyuoi.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #6 (0.48mm) swap to Gray</li><li>At layer #10 (0.88mm) swap to Light Gray</li><li>At layer #17 (1.36mm) swap to White for the rest.</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Mouth Kiss<figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/736696212/draft/2023-09-06_07wbusdv1md1.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA+ Sunlu Gray</li><li>PLA Overture Light Gray </li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #6 (0.48mm) swap to Gray</li><li>At layer #10 (0.88mm) swap to Light Gray</li><li>At layer #15 (1.36mm) swap to White for the rest.</li></ul>

Mix and Match Coaster Set

coaster

matt.pongratz

Printed in PLA 0.2 Layerheight with 15% Infill. Should fit very tightly, but 2 magnets can be used to secure the inlay. If you opt for using magnets use 10x1.5mm

Magnetized Box

magnet

UniDuni3d

I have my notebook on my desk setup, but weekly I need to use it on other places.&nbsp;I cound&#39;t find an easy and fast way to organize the cables down the desk, so I designed this one!&nbsp;Hope it helps you too!

Under Desk Cable organizer! Fast fix/removal

cable tidy 

Mr.Friend 弗兰德先生

打印说明：层高设置随意，无需支撑即可打印 五金与配件：m3*6内六角螺丝9枚，皮筋两根，一小段耗材。组装教程：<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1Gy421q7Lt/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1Gy421q7Lt&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1Gy421q7Lt&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

弹射出鞘埋鞘环首唐横刀1.0 Flute knife

weapons 

Josh-3D

Check out the other two games in the series<a target="_blank" href="https://makerworld.com/en/models/140755#profileId-153348" rel="nofollow noopener">Checkers</a><a target="_blank" href="https://makerworld.com/en/models/134530#profileId-145997" rel="nofollow noopener">Chess</a>&nbsp;[Update] After getting some feedback, I adjusted the print profile, so the color change isn&#39;t discharged into the infill. I also increased the bottom shell layers. Since the main color scheme of this is white/black/green, it makes sense to reinforce those settings to avoid color bleed. Also added an A1 Mini plate for the Mini users!&nbsp;[Update 2!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/840057458" rel="nofollow noopener">Wcad00 </a>for the added clip![Update 3!] Shout out to <a target="_blank" href="https://makerworld.com/en/u/982974221" rel="nofollow noopener">SoftWareCrash </a>and <a target="_blank" href="https://makerworld.com/en/u/425227684" rel="nofollow noopener">Adminstrator</a> for their contributions. The “Pocket” version, a 50% scaled version, and for a set of Xs and Os, with the Xs cut to fit inside the Os.&nbsp;A Travel TicTacToe game, for those long spans stuck at sea, where you don&#39;t want to risk using a pencil on the side of your life raft! Or uh, you know, any other occasion too, like road trips down the coast with friends, or spending family time playing games!&nbsp;Player piece quantity is setup so that X goes first!&nbsp;The clearance is tight. The X and Os should fit fine, but if your printer is sloppy, it might be a tight fit.&nbsp;&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.&nbsp;&nbsp;

TicTacToe - Travel Edition

games

FADY

REMIX FROM BAMBULAB&#39;S WIRELESS MOUSE REQUIREMENTS LIST:Mouse Kit 002 from BAMBULAB :<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>Bottom Part:<a target="_blank" href="https://makerworld.com/en/models/13716#profileId-14573" rel="nofollow noopener">https://makerworld.com/en/models/13716#profileId-14573</a><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466135/design/2024-05-18_06b1c77edebe6.png"></figure>1/ added extrusions from both sides of the mouse for better handling<img class="image_resized" style="width: 13.11%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466135/design/2024-05-17_e36a974efe2de.png"><img class="image_resized" style="width: 12.38%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466135/design/2024-05-17_7da73cf3a1652.png">2/ increased bottom surface for more stability when pressing the buttons<img class="image_resized" style="width: 12.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466135/design/2024-05-17_94047fe40b4ce.png">3/ Easier to click right button4/  with tree supports (also printable without supports)5/ with brimErgonomic mouse cover for the wireless mouse from bambulab

ERGONOMIC + Easy click wireless mouse cover

bambulab

HpInvent

The Phone Pillow: Crafted to resemble a cozy cushion, this unique accessory is actually made from durable plastic. Its plush design provides a comfortable resting place for your device, seamlessly blending functionality with style.&nbsp;It&#39;s comfortably sized for an Iphone 15pro Max or similar size. If you have a smaller phone you can downsize the model to reduce print time ;) Because of many requests I added a version with a cable slot for the charging cable to the print profiles.&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>  There you can also find exclusive Models for Patreon Subscribers only ;) If you Just want to give a one time Support you can buy me a coffe here ;)  <a target="_blank" href="https://buymeacoffee.com/hpinvent" rel="nofollow noopener">https://buymeacoffee.com/hpinvent</a>&nbsp;Here is a small Sneak Peak of a coming Bathroom Set  More Information about the launch date and early acces can be found on my Patreon. <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-06-14_835436fae26ee.png"></a><a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-05-28_f3fb110d8cdec.png"></a> <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener"><img class="image_resized" style="width: 61.65%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-05-30_38b5963246ece.png"></a>Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000465699/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!&nbsp;

The Phone Pillow

phone accessories 

Gunner Lee

A bolt action pen that uses the standard Pilot G2 insert. The 0.2mm nozzle allows for precise tolerances that allow the bolt and threads to work seamlessly. The pen can be printed all in one plate or separate to print colors to mix and match each part. The Pilot G2 can be purchased at any office supply store and is widely available, making this a highly accessible EDC pen.

Bolt Action Pen

stationary

BBN GRAFX

Letters S - V of Alphabet Lore. Each letter is colored up to 4 colors and ready to print

Alphabet Lore Letters S - V

letters

WhatIsHeBuildingInThere

This is a small shelf supported by a skull instead of a conventional bracket. The profile of the shelf is also lined with skull impressions. Very cool unique Goth aesthetic home decor. The shelf was also designed with a tapered pocket in the back so it can easily be hung flush on the wall with picture hanging nails. It was printed in Esun black PLA and Esun Bone White.1 color change and a fairly fast print. I've also printed on a rainbow PEY holographic build plate with neat results. Enjoy :)

Human Skull Shelf

models

FunkyArt

<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_o9x116e39b26.gif"></figure>What is the most obvious thing to do when the handle of your drawer breaks off? Replace it with a push to open mechanism ;) Extend your drawers with the convenient push2open mechanism.The drawers should have rails. it is also important to ensure that the drawers can still be pushed in when upgrading, otherwise they will stick out a little. The brackets should be used for fastening, they are designed in such a way that they cannot be attached at any point, this is to avoid disturbing the mechanics. they can be glued or screwed, and they also allow easy replacement. All you need is a Spring (⌀ 7-8 mm x 40 mm) and some PLA & PETG &nbsp;&nbsp;<h3>Assembling:</h3><figure class="image image_resized image-style-side" style="width:49.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_inrxs9jhvk7r.jpg"></figure>&nbsp;&nbsp;&nbsp;First you should install the slide as shown in the picture. once the slide is in, it should not be able to fall out. make sure that the slide runs smoothly, if not, check for support residue or similar problems. If necessary, you may also have to grind the "rail" on the housing a little.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_jx5j340l2jhs.jpg"></figure>&nbsp;&nbsp;&nbsp;These two hooks are not the same, make sure the hook is installed below the axle height. You should also place the spring as shown in the picture. This is actually the only part where something can be installed incorrectly :) &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-right" style="width:49.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_0o97yw2e53j0.jpg"></figure>&nbsp;&nbsp;Here I have taken the side with the "R", which belongs to the back or closed side. I pressed it into the spring first and then installed both together. the slide should be fully extended (like picture above) so that the hook finds its correct place immediately. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-left" style="width:49.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_arthoszohmbq.jpg"></figure>&nbsp;&nbsp;&nbsp;Now install the spring, if there is no hole you have forgotten to remove the support ;) If it is to short you can pull them to increase the size a little (like i did). Then carefully bend in the cover parallel to the back. This should ideally be a little flexible (petg), then it should fit without any problems. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<figure class="image image_resized image-style-align-right" style="width:49.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/199069/2023-10-11_xcdsurslner1.jpg"></figure>&nbsp;&nbsp;Now the whole thing should work. If it doesn't, press both hooks together again, they should be even with the housing. If this doesn't work either, check if there is support on the inside of the slider (on both sides). To use the whole thing for a longer time, you should apply a little grease to the grinding points.&nbsp;&nbsp;&nbsp;

Push2open - Reliable and powerful (Latch mechanism)

moving parts

IntroA Case/Stand for your Nintendo Switch, to make it look like a Retro TV!&nbsp;I remember this old TV my dad had when I was a kid, and something struck me, that I wanted that for my Nintendo Switch! A Retro TV styled case to stick it in, for a little added fun when I&#39;m not playing at the big screen. Comes with lots of handy spaces too, to tuck secrets in!&nbsp;The front panel uses magnets to keep secure. There&#39;s a pathway too, to allow for a USB-C cable for power and what have you.&nbsp;There&#39;s a secondary profile included, which has a stand for the TV, to lean it at a more comfortable viewing angle. Not required, but might be desired!<figure class="image image_resized" style="width:29.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_939e426832faf.png"></figure>UpdateAdded a print profile for the original switch! I don&#39;t have an original Switch myself, but a user here helped test the fit and looked good! Will update it if any issues crop up though. I printed a copy to make sure it still prints good and the buttons fit, and they do! Enjoy!&nbsp;Community SpotlightCheck out the <a target="_blank" href="https://makerworld.com/en/models/415649#profileId-317808" rel="nofollow noopener">accessories </a>made by <a target="_blank" href="https://makerworld.com/en/@SteveKeller" rel="nofollow noopener">@SteveKeller</a>! In particular Steve has done a remix of the volume/power buttons for the original, and so make sure to check those out, as I&#39;m willing to bet they&#39;ll have an improved fit (I don&#39;t have the original, so wasn&#39;t able to fully test the fit myself) Lots of other cool stuff too! &nbsp;Tools &amp; AssemblyFeatured Filament:Bambu PLA Basic BrownBambu PLA Metal Iridium GoldBambu PLA Matte Charcoal&nbsp;Tools needed:Hex DriverDrill bit (For clearing out holes on the front panel, for the knobs)&nbsp;Hardware needed:2 M3x8 screws (For the knobs)2 M3x10 screws (For the back)8 4mmx6mm magnets <a target="_blank" href="https://www.amazon.com/dp/B075PMYRFT" rel="nofollow noopener">(Here&#39;s an amazon link to the magnets needed)</a>&nbsp;On the front panel, clear out the holes for the knobs, so you can feed the M3x8 screws in. The holes were capped so the insets on the back side would print cleaner. Once the holes are clear, use M3x8 screws to attach the knobs<figure class="image image_resized" style="width:37.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_be95abb54b4eb.png"></figure>On the back, secure it using 4 M3x10 screws.<figure class="image image_resized" style="width:49.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_a4165b1b7550f.png"></figure>Insert the 3 buttons, making sure they line up length-wise. There will be an additional piece to insert in, to help secure the buttons in place when the switch isn&#39;t installed and the front panel isn&#39;t in.<figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_26af293c328f3.png"></figure>Lastly, insert the 8 magnets into the front panel and main case. Be careful with the orientation of the magnets as you insert them! They are press fit and are a one way operation. The fit is very tight, so you wont be able to pull them out once they&#39;re in. Because they are very tight, it&#39;ll seem tough getting them in, but you can do it! I recommend using a tool or something that you can put the magnet on, to help aid in pushing it in.-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Retro TV - Nintendo Switch Case

gaming 

Mister.D

&nbsp;A wall key holder that mounts with double-sided adhesive tape. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Bird / Key Holder For Wall

keys 🔑 

user_4203152696

This shelf bracket was designed by me, I am an architecture student and I love creating models of elements related to architecture. You can check out my profile to find more models like this.You can print them very easily, not many supports needed if printed upside down.

Organic Shelf Brackets

interior design

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

tools

Bunk.Wire

Artistic R2D2 picture Hueforged robot from Star Wars. You can use as a background any color which is close to the white and it should be good. It would look great on a wall as a poster&nbsp;Remember if you sant to scale, do it only with x and y axis, z must be the same as original.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Army Red Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA Kexcelled Skin Transmission Distance: 4.4Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Army Red At layer #7 (0.64mm) swap to Sapphire Blue At layer #11 (0.96mm) swap to Skin for the rest.

R2D2 artistic poster (hueforge)

Dr.Mussy

<div><h1>Summary</h1><div><h3>Don't forget to "Click A Like" & check out my other Cool designs and Follow my Weekly dose of KooKoo uploads ;)</h3>I was working on something else and then I stumbled on this Cool Fishing Idea, The pocket Fishing Ring is Small, Handy, and just Fun ;)BOM: M3 x 40mm L (spool) M3 x 16mm L (handle) M3 Lock Hex Nut (lock) 3mm ID x 6mm OD O-Ring (spool)If you are interested in other prop firearms, Airsoft parts and designs do join our group on Matrix: <a href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.</div></div>

Pocket Fishing Ring

camping

Boss Tech Print Innovations

Original model is created by Thomas_63847 on Pintables. This Silica Dry Pod is for the standard AMS unit and will work with the Hydra Mod as well. This Silica Dry Pod is designed to work with a round hydrometer to monitor and display the humidity levels in your unit. Can print lid in different colors to have a two tone look. Works great at maintaining the proper low humidity levels in your AMS unit keeping your filament dry and improving your print quality for amazing printing results! Works much better than the pouches/ packets. Would highly recommend checking out Silica Dry Pods for your AMS unit to not only help improve filament longevity but also the quality of your prints. If you ever see your AMS Cabin Humidity drop below Green this will help fix that issue and maintain a proper low level humidity. Prefect to print with your favorite material, if you use a high heat material you can also use these Silica Dry Pods to re-dry your silica beads as well.&nbsp;&nbsp;Check out our other Silica Dry Pods such as our ones for the side of unit, Square Hydrometer, and our regular ones without the Hydrometer.This design does not require a support to print if you have your printer setting dialed in, however for those that would like the easy of mind please use plate #1 that includes support, for those that would like to print without support use plate #2. For those that would like to make a two tone one please use plates #3 and #4.&nbsp;Plate #1 has the Dry Pod with Round Hydrometer with Support + Lid&nbsp;Plate #2 has the Dry Pod with Round Hydrometer without Support + Lid&nbsp;Plate #3 Has Dry Pod With Round Hydrometer without support&nbsp;Plate #4 Has Lid&nbsp;<h3>Print Times</h3>1 silica box + lid will take about 2h 41mins, and the plate of 3 silica boxes with lids will take about 7h 52mins. I will also add a filling funnel that can be printed to add the silica beads into theses boxes to fill

Silica Dry Box Round Hygrometer for Bambu Lab AMS

printer 

vidguide

Space X Drone Ship - This was originally designed as a coaster, but makes a good model too. Colorised, and painted ready to print in one go.

Space X Drone Ship / Barge - Coaster/Model

space x

Rup_Made

Hello,&nbsp;here is a modular rack system for a Gridfinity box i found on Printables. <a target="_blank" href="https://www.printables.com/de/model/495142-rugged-gridfinity-box-parametric" rel="nofollow noopener">https://www.printables.com/de/model/495142-rugged-gridfinity-box-parametric</a>&nbsp;The Rack is made for the 4x4x6 variant of the box.&nbsp;Per stack you need one bottom part and as many modul parts as you have boxes.&nbsp;The moduls are held together by 4 M3x12 Hex head screws witch are self tapped into the print.&nbsp;Material is Bambulab PLA-CF but feel free to print in any material you wish.&nbsp;No supports needed.

Rack for Gridfinity box 4x4

storage

Zurlingo-3D

<h2>Marshall Mini Stack Smartphone Amplifier/Stand</h2>&nbsp;Features:<ul><li>A Scale Replica Of A Marshall JCM800 Head And Cab</li><li>80mm x 15mm Phone Slot</li><li>Functional Speaker Grill</li><li>Bass Expansion Chamber</li><li>Downward Facing Ports</li><li>Separated Into Parts For Easy Multicolour Printing</li><li>Greatly Improved Audio Quality Over Stock Phone Speaker</li><li>Much Better Low/Mid Frequency Response With A Noticeable Bass Boost</li><li>Much More Directed Sound Projection</li><li>Master Volume is set to 11 as a nod to Spinal Tap </li></ul><figure class="media"></figure>I have separated this model into separate print profiles for easy printing. This will save you having to adjust settings within Bambu Studio when using a 0.2mm nozzle. The only thing you need to do is physically swap nozzle and change the nozzle type on the printer itself :)&nbsp;Assembly:<ul><li>All parts must be glued together. It requires the smallest amount of glue to hold the parts in place, so be cautious not to use too much.</li><li>The logos have a recessed impression in the speaker grills of the main body, for easy alignment.</li></ul>&nbsp;Extra Info:<ul><li>The front panel and white edging strips must be printed with a 0.2mm nozzle to retain as much quality as possible. At this scale the text is barely readable, but does still give the desired effect. You can of course scale the amp up enough to retain all of the text if you want to :)</li></ul>&nbsp;<ul><li>The main body will print with no support (The example print was printed this way) BUT this does require two 80mm un-supported bridges and some clean up with a sharp craft knife post print. This is in order to get a nice fit with the edging strips.</li></ul>&nbsp;<ul><li>The feet are important to the overall sound quality. If the amp is rested directly on a flat surface then there is nowhere for the ports to project the sound. You can also change the EQ of the sound by adjusting this height (increase Z axis scale of the feet only, in Bambu studio.)</li></ul>&nbsp;I really hope you like this one! - It&#39;s been a fair amount of work to achieve what I wanted with this design and I&#39;m really happy with how it turned out :)&nbsp;Please rate and review your printing experience&nbsp;Don&#39;t forget to add a picture of your amp to the comments below :P&nbsp;Thanks for looking!<h3> </h3>Please also check out my latest mini amp here:<a target="_blank" href="https://makerworld.com/en/models/513021#profileId-429098" rel="nofollow noopener">https://makerworld.com/en/models/513021#profileId-429098</a> &nbsp;<img class="image_resized" style="width: 48.12%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000415129/design/2024-06-26_961bc99b784b7.png">&nbsp;

Marshall Mini Stack Smartphone Amplifier/Stand

audio

Right now I&#39;m a little into modern plant pots for all my plants at home. So I designed some new ones. Hope you like the design ! There are differtent versions availible in the print profiles Just choose the print profile you like best. The Pots can simply be scaled to you demands&nbsp;Due to many requests for commercial licenses for my 3D models I created a patreon page. You can become a member to get permission for commercial use or just want to support my work : <a target="_blank" href="https://www.patreon.com/user?u=79128277" rel="nofollow noopener">https://www.patreon.com/user?u=79128277</a>&nbsp;Also check out my other Designs!I have a bunch more stuff in my profile!! <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener">https://makerworld.com/en/u/3624704578</a><a target="_blank" href="https://makerworld.com/en/models/428498" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-04-18_7588ba5642a27.png"></a><a target="_blank" href="https://makerworld.com/en/models/426994" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-04-15_b0f8912a15393.png"></a><a target="_blank" href="https://makerworld.com/en/models/427979" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-04-15_b1e75bac7bd51.png"></a><a target="_blank" href="https://makerworld.com/en/models/416941" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-04-08_ebe2de8bae1b3.png"></a><a target="_blank" href="https://makerworld.com/en/models/232706" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-03-06_ea517b7dbe741.png"></a><a target="_blank" href="https://makerworld.com/en/models/394559" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-03-27_3b061a50c97b7.png"></a> <a target="_blank" href="https://makerworld.com/en/u/3624704578" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000438449/design/2024-03-08_a8a626fc04c78.png"></a>  &nbsp;&nbsp;&nbsp;Happy printing!

Modern ribbed Planter Plant Pot Vase Series 2

🪴 plants

frizzl3Dmama

Meet your new desk buddy!  This fidget desk plant is the perfect way to bring the springtime joy indoors and right to you. Place the stems into the holes in any arrangement you like. Each of the leaves and petals are articulated for additional movement, and the vine includes a print-in-place chain. Whether you&#39;re pausing for a break or mulling over a problem, this fidget-friendly design not only boosts productivity but also adds a touch of fun to your workspace. I am really proud of this model at this point in my 3D modeling journey but I also already have so many ideas for future improvements and variations. If you have ideas, please let me know in a comment! And if you print this design, please consider sharing your photos here. I&#39;d love to see how they come out!&nbsp;Happy Spring!

Fidget Desk Plant

fidget

Print Design

Because why settle for one lamp when you can have two? Its clever collapsible feature makes it versatile, portable and effortlessly switches from casting a warm, ambient glow to providing a more focused lighting, giving you the best of both worlds.&nbsp;Use the handle of hang it where you need or to change the lighting!!