Séarlas

Paul.thwaites

Another AI art I made and used hueforge to make colourful.&nbsp;Just done with PLA I had On hand and 0.08m settings &nbsp;Black Pla baseBlue Pla at layer 5Orange at layer 9White at 19

Hueforge Drippy Wolf

Wall Decorations

LiL_PPJ

groot keychain

Key Chains

squinn

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will best work for your drill bit, and then the cover on the back can be easily removed with a twist to dump the debris when you're done. A protruded pointer is included on the top of the piece to help with alignment.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163361/2023-11-11_s7cilgno7l35.gif"></figure>This model has been designed so that no supports or brim are required, and the STLs are oriented as they should be on the print bed. Post print, the front and middle piece can be simply snapped together, so no glue or other hardware is required. I printed all three pieces of the one shown in the pictures in PLA, but TPU would likely work really well for the bottom “cover” piece if you have it.

Drill Guide and Dust Catcher

Tools

PaulBPunkt

The matching Coupon-Giftbox is ready! :)<a target="_blank" href="https://makerworld.com/en/models/65072#profileId-68398" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/542884/2023-11-15_eac1158b94e0a.jpg"></a>Christmas is just around the corner and with it the time for presents. Surprise your loved ones with a small coupon for a 3D print. Even though many of you probably also print things for your friends for free, the coupon lowers the recipient's inhibition threshold to ask for it.The coupon can be folded along the perforated line and validated.&nbsp;The coupon can be printed quickly and is therefore also suitable as a last-minute gift.I have uploaded two profiles, one in two colors and one in three colors.&nbsp;The coupon ist optimized for printing in 0.2 mm layer height.&nbsp;Update: Für meine deutschsprachigen Landsleute habe ich auch noch eine deutsche Version (Gutschein für einen 3D-Druck) als Printprofile ergänzt.&nbsp;Update: I now also have a custom coupon online that you can write on as you wish: <a target="_blank" href="https://makerworld.com/en/models/188878#profileId-208228" rel="nofollow noopener">https://makerworld.com/en/models/188878#profileId-208228</a>&nbsp;&nbsp;Happy printing! :)

Coupon for one 3D-Print

Gifts

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Toys

筋斗云の点线面

&nbsp;<a target="_blank" href="https://www.bilibili.com/video/BV15C4y1j7UF/?spm_id_from=333.999.0.0&vd_source=5de71fde39d0a93532c374c066ad3b38" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-11-15_85bb99b7989f8.gif"></a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_4e2237aad8575.gif"></figure>20240309更新：上传AMSlite装饰盖板stl（原始模型文件）&nbsp;<figure class="image image_resized" style="width:64.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2024-03-09_a404cbac01e9d.png"></figure>  这是专门为A1MINI小面积打印的设计版本，可以让AMS lite改成竖直放置，更简单方便换料操作方式，更小的占地面积，合理的后置进料管线布局，具体的组装说明和更多细节，点击上面gif进入视频页面。&nbsp;主要优化了：1.AMSLite的耗材穿线原来在底面，现在改成了正面可视，不用再盲操作了；2.减少了台面的占地面积，从原来长方形占地面积，变成了一个小方块；3.后面的耗材换料不用再碍手碍脚了，现在都在正面直接换料；&nbsp;另外侧面的螺丝来自AMSlite主体的对应孔洞螺丝，所以只需要放入底座前把螺丝拧下来，放上底座后再和底座一起拧上去就ok。&nbsp;来自deepl翻译：This is a specially designed version for A1MINI small area printing, which allows AMS lite to be placed vertically instead, simpler and more convenient way to change the material operation, smaller footprint, reasonable rear feeding pipeline layout, specific assembly instructions and more details, click the above gif to enter the video page.&nbsp;Mainly optimized:1. AMSLite's consumable threading was originally on the bottom surface, but now it has been changed to be visible on the front side, so you don't have to operate blindly anymore;2. Reduced the footprint of the countertop, from the original rectangular footprint, into a small square;3. The back of the consumables change materials do not have to get in the way again, are now in the front directly change materials;&nbsp;In addition the side of the screws from the AMSlite body of the corresponding holes screws, so only need to be put into the base before the screws down, put on the base and then screwed up with the base on the OK.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_ce097d54b5016.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-12-06_65897a89971a9.png"></figure>储物盒底座版本在这：👇（点击图片直达）The storage box base version is here:👇 (click on the image to go straight to it)<figure class="image"><a href="https://makerworld.com/zh/models/59700#profileId-61765" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/245979/2023-11-09_885dbb8dc2522.gif"></a></figure>&nbsp;&nbsp;

【筋斗云】原创设计-A1mini AMS lite 立式底座（小面积可打印版本）

Bambulab A1

Pro Phone Stand