I have to use brim-ears on the a1 mini for the small and middle sized model.

Works great Thanks

Printed in PLA-Basic. Works . Thanks

Printed in PLA-Basic. No Problems. Thanks

Work quite well for a pice of plastic. Thanks

The print in PETD didn't turn out so well. The second attempt in PLA filament was very good. I recommend using PLA.

It Works. Tanks.

works. Thanks

Printed at 100% with PLA Matte. Nice Model thanks.

Printed in PLA-Matte. No problems. Thanks

Easy to print. Nice Model. Thanks

Printed in PLABasic. Works very good. Thanks

Printed in PLA Matte. Works good. Thanks.

Printed downsized 100% in PLA Matte. Thanks

Now it works much better. Thanks

This profile seems to have more tolerances. That's why the spring slider jumped out of its guide. I drilled a small 1.8 mm hole in the slider and the housing and glued a piece of filament into the slider. Now it works.

Thanks, closed one defekt Port.

Nice. Printed in PLA wood and green.

It is more confortable to load the disks. Thanks