Sps00789

bmish builds

This lineart bouquet is an elegant wall art piece designed with minimalism and ease of 3D printing in mind. It captures the charm of a handpicked bouquet, neatly arranged and ready to improve the look of your walls. Its slender profile can be effortlessly hung using a single pin at the top flower or with a few pieces of tape strategically placed at the center of the flowers. The design is optimized for low material usage and a quick print time.&nbsp;The wall art bouquet features versatility in size; it can be scaled to fit different spaces however it is essential to keep the Z-Axis dimension unchanged to maintain the integrity of the design (.8mm or 4-layers).&nbsp;For best results be sure to clean your print bed prior to printing. I would recommend using a Textured PEI plate to get the cleanest look as the bottom layer will be what is showing once it is on the wall. &nbsp;Comment if you would like me to add a base/stand and I will design it and post it ASAP.

Spring Flower Bouquet Wall Line Art

Wildflowers

w00lfy

Wall mounting HEX shelves including a stencil to mark for screwholes and a spacer to mount them in equal distances to each other. &nbsp;My default profile uses lightning infill which makes them super light.&nbsp;The shelves mount to the wall with two 4mm taper head screws (non visible once mounted)

HEX shelves wall mounting

Windrose

This pop-up catapult prints in place, the only extra part needed is a rubber band. Though even if you don't have a rubber band, you can still launch manually!&nbsp;Note: Before printing you may want to test your printer's tolerance for print in place hinges. To do that, you can use my <a target="_blank" href="https://makerworld.com/en/models/388977#profileId-289900" rel="nofollow noopener">Print in Place Tolerance Test</a> model. By default, the catapults have 0.2mm of tolerance between separate parts.&nbsp;You can print this in PLA or PETG.&nbsp;When printing via the 3mf file, you should import it into Bambu Studio as a single object having multiple parts. I would recommend at least 25% infill on the arm, 15% for everything else is fine.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/bZmboski8D0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bZmboski8D0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Colors in photo examples:<ul><li>Prusament PETG - Prusa Orange</li><li>Overture PLA - Purple</li></ul>

Print in Place Pop-up Catapult

Etsy Shop

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Overture v2 print profile is the original print profile updated with a new model. It's a redesign based on user feedback and also uses about 40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>OVERTURE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the OVERTURE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

Wildflowers

Fun

Etsy Shop

Printer Mods