user_1805442672

Blendell

A giant tribute inspired by one of the most basic LEGO bricks - the 1x1 Round Plate.&nbsp;&nbsp;They're designed to be stackable and stay together, just like the real LEGO 1x1 round plates, but slightly optimized for printing.&nbsp;&nbsp;3:1 (~25mm dia) and 4.5:1 (~37mm dia) versions are included in the same print profile. Just pick which plate to print.&nbsp;&nbsp;If you want even bigger, I recommend using <a target="_blank" href="https://makerworld.com/en/models/136221#profileId-148171" rel="nofollow noopener">this version optimized for 10:1 scale!</a>&nbsp;&nbsp;Raw .stl file is at 1:1 scale if you want to scale it to any other sizes.&nbsp;&nbsp;Enjoy!

Giant LEGO Dots

lEGO

CasaPrint3D

Important: Using a heat-resistant material is critical for this project, especially for the clip that attaches to the vent. Beware of risk of clip deformation after parking under the sun, it may become loose over time (even with PETG). Temperature inside a car&#39;s dashboard can easily exceed 65C (150F) on a typical summer day.&nbsp;Please note than plastic-to-plastic contact will often generate a bit of noise, but personally I don&#39;t even notice it when I&#39;m cruising. If you already printed the V1 version, the only parts that have changed in geometry and that need to be reprinted are: ‘shaft’, ‘nacelle_top’, &#39;tip&#39;, and ‘fan_with_brims’. The default vent clip included, is now printed flat for increased strength.&nbsp;This miniature jet engine easily attaches to your car&#39;s AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container.&nbsp;Among the things you can place inside here are some options:<ul><li>Freshly roasted coffee beans</li><li>A cotton with a few drops of essential oils</li><li>Aromatic plant leafs (lavender, rosemany, etc) - make sure they don&#39;t pass through the lid once it&#39;s closed</li></ul>Utilization<ol><li>Place the aromatic elements inside the recipient and screw the lid on top.</li><li>Screw the top cover</li><li>Place the fan - the side with extruded circle goes up </li><li>Insert the shaft - press until it clicks or hits the bottom. Make sure it is well aligned.</li><li>Place the tip of the fan and screw the car vent clip on the rear part. In case the tip doesn&#39;t stay atttached try scaling it down slightly.</li></ol><img class="image_resized" style="width: 71.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-16_4560e8ec92314.png">Important:<ul><li>Printing with a heat-resistant material (i.e, ABS / ASA)</li><li>If the fan is too lose, which may happen depending on your tolerances try scaling it down slightly.</li><li>If the vent clip doesn&#39;t work for your car, I have included a second design as well.</li></ul>If that still doesn&#39;t work, please feel free to reach out to us in the comments.<ul><li>The fan may not spin at lower air conditioning settings, but a bit of WD40 on the shaft may help.</li><li>As a general caution: Do not place any ingredient that can be bad for breathing and do not manipulate while driving.</li><li>Remember that this file is for personal use only - For a commercial license please check our <a target="_blank" href="https://www.patreon.com/CasaPrint3D" rel="nofollow noopener">Patreon</a></li></ul>Print Settings:<ul><li>0.16mm layer height for the fan, the rest can be done at 0.2</li><li>No supports</li><li>Clean the fan from any burr or imperfections after print to improve the spin.</li></ul><a target="_blank" href="https://www.youtube.com/shorts/2Zy5KAO0LXY" rel="nofollow noopener">https://www.youtube.com/shorts/2Zy5KAO0LXY</a>&nbsp;If you&#39;d like to support our work, you can donate here: <a target="_blank" href="https://ko-fi.com/casaprint3d" rel="nofollow noopener">[Ko-Fi]</a> or give us a boost 🚀. Your contribution, no matter how small, helps us to continue bringing more 3D models to life. Thank you!&nbsp;Make sure to check out our latest design!: Anti-strees fidget pen with gears for 0.2mm nozzle.<a target="_blank" href="https://makerworld.com/en/models/458729#profileId-366866" rel="nofollow noopener">https://makerworld.com/en/models/458729#profileId-366866</a>&nbsp;<img class="image_resized" style="width: 50.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-10_c31a44e8121fa.gif">&nbsp;Happy printing!

Turbofan aroma diffuser - Car vent mini Jet engine

Valentin15

This is a WZ3605E, JL3605 (or similar) power supply housing. You can assemble your own power supply with minimal soldering skills! Psu_enclosure houses all the components including the power supply itself, connectors and the on/off switch. I connected everything inside with 0.75mm diameter wire (change wire size according to your load expectation). You will need to solder the connections while assembling it, also use heat shrink tubes to avoid short circuits inside the housing.It is a bit tricky to put everything together but it can be done, everything should snap into place.Psu_bottom_cover screws directly into the enclosure on the bottom side with four m3x10mm.I used hex socked m3x10mm, their heads stick out the base of the power supply but that can be improved by attaching rubber feet to the screws themselves. Bill of Materials:<ul><li>1x WZ3605E / JL3605 or similar</li><li>1x DC Power Jack (5.5 mm Hole, 2.1 mm Pin)</li><li>2x 4mm Female Banana Plug (red and black)</li><li>1x KCD1-11-2P ON/OFF Switch</li><li>4x Hex Socket Pan metric 3 x 10mm length</li><li>19 - 22 AWG copper wire</li><li>Heat shrink tubes</li></ul>

Desk power supply housing

ELECTRONICS

Silver Surfer

Just a little Q-Tip and Cottonpad-Organizer.My first self developed model.

Q-Tip and Cottton Pad Organizer

BATH

3D Print Masters Hub

Measuring Cup Set-Great measuring cup set!-Easy print, designed this way to avoid print supports 👍🏻-Tie together thru hole in handle.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Measuring Cup Set

CAFFE

user_2964458025

I wanted something to hold my Lost Mary vapes, so designed this. It holds 5 fairly snugly, and has holes at the bottom (so you can puff away while the vapes are still in the holder if you wanted to for whatever reason). Quite a niche design, but I am learning fusion360 and this is the first thing I've done. I'd recommend at least 35% infill to give it a bit of weight, printed at 0.2mm layer height on a Bambu Lab p1p.

Lost Mary (vape) Holder

VAPE

Scratchplate3D

A stable small shelf for things like keys, spices, small cans, etc.Simply screw or clue it.Needs no Support.Now you can find here different sizes.Please don´t print this with silk filament.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Small Shelf

SHELFS

Bhoy

ifixit Tweezer Replacement Tips

MOBILE PHONE TOOLS

The Big Greek

&nbsp;Take a look at my new <a target="_blank" href="https://makerworld.com/de/models/94736#profileId-101318" rel="nofollow noopener">Wiper Upgrade Adapter</a> also Simple<ol><li>Carbon Rods Cleaner X-Axis (simple) Print the model <img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_a77ef7125092a.jpg"> </li><li>grab a sponge :-) <img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_5e3e84a78b2fb.jpg"> </li><li>cut out 2 pieces with a size of 20mm x 30mm <img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_175ffbbad9b58.jpg"> </li><li>place these in the model <img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_7af60d64eaee9.jpg"> </li><li>fill it up with ISO and clean the rods <img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_4a110edc33fe7.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_b19062c83217d.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_959881071e828.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_401182c78825b.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/378303/2023-12-08_5dd7754cacc91.jpg"></li></ol>easy to use, easy to clean&nbsp;If you like it, rate it. THX&nbsp;Have FUN&nbsp;

Carbon Rods Cleaner X-Axis  (simple)

PRINTER TOOLS

raupulus

Housing for the &#34;pico inky&#34; e-ink screen used with raspberry pi pico

Raspberry Pi Pico e-paper display case (Pico Inky)

TOOL CASES

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;