Stule

Lox-3D

Deutsch&nbsp;Ich Empfehle vor jeden Druck das Filament für mindesten 6 Stunden bei 55° zu Trocknen um kleine Blässchen bildung im Druck zu vermeiden die durch feuchtigkeit entstehen.&nbsp;Die Druck Profiele sind perfekt für TPU abgestimmt es gibt eins für Transparentes TPU und eins für Normales TPU dazu muss nur das Testmodel gelöscht werden und seine eigene STL eigefügt werden.&nbsp;Das Model eignet sich super für ein Farbtest mit verschiedenen schichten von 0,2mm - 1mm dicke um die Transparents zu sehen.&nbsp;Ebendso ist ein kleiner Test dabei um zu sehen ob die Lochdiminsion passen.&nbsp;---------------------------------------------&nbsp;Englisch&nbsp;I recommend drying the filament for at least 6 hours at 55° before each print to avoid small bubbles in the print caused by moisture.&nbsp;The printing profiles are perfectly tailored for TPU - there is one for transparent TPU and one for normal TPU. All you have to do is delete the test model and add your own STL.&nbsp;The model is great for a color test with different layers of 0.2mm - 1mm thick to see the transparents.&nbsp;There is also a small test to see whether the hole dimensions are correct.

Perfect TPU printing Profile / Color Sample & hole test

Quantum.Grower

This a my remix of the Flipper Zero Case. I had to make my own remix because all the Printable models were giving me errors when attempting to slice them in PrusaSlicer (prior to getting my X1C). This case allows you to store your Flipper Zero with the silicone case on it. The top lid has a cut out so you can insert the stock foam and USB cable. Underneath the USB foam in the top lid is a cut out for SD Card storage as well. Please leave a comment and rating if you enjoy this remix!&nbsp;Additional parts needed for this build:<ul><li>4x M3 x 20mm (front hinges)</li><li>2x M3 x 16mm (rear hinges)</li></ul>&nbsp;The edits I made were:<ul><li>Added the insert so you can fit a FZ with a silicone case.</li><li>Added missing front bezel to top lid.</li><li>Added SD Card text to inside of top lid.</li></ul>

tpu

flipper 0