user_1760203098

ohgoose

Print your very own super credits to show everyone your dedication to democracy&nbsp;“For the Federation! And for personal glory, of course.”&nbsp;Print info:<ul><li>0.2mm layer</li><li>15% infill</li><li>Multicolor and single color support</li><li>No supports</li><li>Size is easily adjustable, 50 mm is recommended smallest.</li><li>Ironing enabled</li></ul>

Helldivers 2 Super Credit

currency

3Deen-Druck

A blue shell from Mario Kart as a gold trophy for the winner of a tournament.&nbsp;The blue shell might needs to be resized to your likes. It is fully colored and should be printed using an AMS and the colors:■ blue□ white■ black■ gold&nbsp;-------------------------------------------------------------------------------------------------------------------------------Please don't forget to LIKE👍, Comment ✍ and RATE ⭐⭐⭐⭐⭐ - it would be awesome! Thanks❣

Blue Shell Mario Kart Tropy Gold

mario

Ronzoguy

Crafted with a side cutout in the shape of a rectangle, allowing seamless insertion of a USB light strip. Additionally, featuring a serrated back for effortless hanging. Their lightweight design permits easy hanging with just a thumbtack.&nbsp;Pro Tips:Utilize a hot glue gun for securing the LED strips, offering a swift and tidy method. I&#39;ve found this to be the most efficient technique. Some LED strips may lose their adhesive properties over time, leading to detachment.Apply a silver or reflective material on the rear surface. Personally, I&#39;ve employed silver tape, but various alternatives exist. This facilitates even light distribution throughout the box, enhancing brightness.

Princess Peach LED Lightbox

light boxes 

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;We are Venom!&nbsp;L3GO inspired, stands approximately 8 inches tall and is fully articulating! Two versions of the chest are included, as some had trouble removing supports when printing vertically. The split horizontal chest does require glue or some other bonding agent to reassmble. I tried using the built in pegs and dowel rods, but it never aligned perfectly, so I opted to do without. It&#39;s a small enough piece that it shouldn&#39;t require it. I use DAP Rapid Fuse from the Home Depot, it has a long enough working time to allow for readjustments after gluing.&nbsp;When gluing, glue only on the inner edge! Otherwise you&#39;ll have squeeze out and the glue will stain the model. I recommend some small spring clamps also to keep it in place once glued until dry. The seam is nearly invisible after putting the arms and head on.&nbsp;Be sure to check out our other L3GO inspired Marvel models! More are being added weekly!

Bricks Venom

lego

fay3dlab

This is the new ship for my suspended star wars collections..This time its the Tie Interceptor.. I fully modelled everything using Tinkercad..<figure class="image image_resized" style="width:53.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_31a58700f3377.png"></figure><figure class="image image_resized" style="width:58.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_851afb31ec719.png"></figure>In order to print the ship vertically.. i had to modify the back thrusters and extend it to lay flat with the wings.. &nbsp;For the frame.. I thought this time im going to make a minimal frame for the ship so the tie interceptor details can be seen from any angles..The LED strips channel also is simple to install.. nothing fancy needed.. just insert the the LED strips to size and you're done..i used the new bluetooth LED strip for the lights.. it looked amazing.. There were more animation options when you use the bluetooth controller.. i connected it to my phone and it had a ton of color combination and animation options..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/735962/2024-03-20_9926bdc1cb3fc.gif"></figure>If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light <a target="_blank" href="https://s.click.aliexpress.com/e/_oEk0hDa" rel="nofollow noopener">https://s.click.aliexpress.com/e/_oEk0hDa</a>&nbsp;As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;I hope you guys have fun printing this new version of the suspended ornithopter<figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you'll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you're looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>

Suspended Tie Interceptor

star wars

Williams Industries

Made this for a friend. Can be a coaster, or you can use adhesive to put this on the wall, additionally, you can download my desk buddy stand <a target="_blank" href="https://makerworld.com/en/models/80177#profileId-178576" rel="nofollow noopener">HERE</a> and select the Desk buddy profile and use it as a stand for a desk or shelf. The other profile is for a necklace or scale it down as a keychain or earrings. Layered version in RAW files.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Patreon includes commercial use on all prints.

Kansas City Swifties

keychain 

darvil66

Photo Sizes: 2 Photos 90mm X 60mm 2 Photos 60mm X 60mm 2 Photos 30mm X 30mmThe plates of the second profile can be used as a measurement for the photos.

Photo Frame I Love You Mom

mother's day 

duck.knapp

I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...&nbsp;&nbsp;so I developed my own press. You can print everything except 6x 608 zz ball bearings which you have to press in.&nbsp;&nbsp;For assembly you need: - First the 6 bearings are pressed in - join your arms - arms to the headpiece - arms with headpiece to the base&nbsp;&nbsp;It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose. The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.&nbsp;It&#39;s not an easy print but I think it&#39;s cool XD&nbsp;Material: PETG, ABS, Nylon or so&nbsp;btw: In the pictures you can see the old arms, now they are different lengthsand as always if you think of something that I can change/improve, please let me know

Heat Set Insert Press (99% 3D-Printed)

tools

TJ.Makes

Designed up a model of the Teenage Mutant Ninja Turtles Ice Pops. The file is designed for multicolor prints, but can be printed in a single color. A single multicolor face takes about 3.7 hours to print and a set of 4 with each color will take about 13 hours. Each stick takes about 25 minutes. The stick should slide into the head with a “click”. It maybe be a fairly tight fit but should go with a little force. The stick should fit either side up, choose whichever one looks best from your print.&nbsp;Also included a bonus ice pop model with a bite taken out.&nbsp;If slicing yourself recommend variable layer height for this model and 3 top and bottom layers.

Teenage Mutant Ninja Turtles Ice Pop Popsicle

tmnt

Protopasta

<h2>Summary</h2>Great Scott! Print your own Mr. Fusion Reactor prop that's also a dice tower!Gloop and Protopasta merged together to form a special collab for the February Endless PLA Subscription!Learn more about this collab here: <a target="_blank" href="https://proto-pasta.com/blogs/stories/endless-pla-29-february-2024-we-got-glooped" rel="nofollow noopener">Gloop x Protopasta</a>Want this model a month early and/or sell this design? Become an Endless Designs Subscriber here: <a target="_blank" href="https://proto-pasta.com/collections/endless-pastabilities-subscriptions/products/endless-design-digital-subscription" rel="nofollow noopener">Endless Designs Subscription</a><h2>Print Settings</h2>Rafts: Doesn't Matter                                            Resolution:                     .2mm Layer Height&nbsp;Infill: 15-25%                Filament:    Protopasta HTPLA                         Notes:                    -The Mr. Fusion Base top is a 3mf if you want to print with color  -Supports Needed for Lever -Supports optional for bolt holes on the base bottom and top -Print all parts -Secure the lever onto the front of the base -Secure the Top to the Bottom using the 10mm nut and bolt -Slide the container into place of the base top -Gently pressure fit the knob onto the back -I found that heating it a bit with a lighter helps because it will want to snap if you press too hard -Press the lid onto the top -Some sanding may be necessary due to printer tolerances

Mr. Fusion Dice Tower 

dice towers 

SK07 Skipper07

Hello and EVERYONE, THIS IS MY HALLOWEEN HOUSE I HOPE YOU LIKE IT.

Skippers Halloween House

spooky

Man of Mystery Intl.

So you wanna be a corn star?! You&#39;ve come to the right place.&nbsp;Easily expand your food weapon arsenal with this inconspicuous cob of corn concealing a roughly 30&#34; saber blade for an overall length of around 38&#34; from tip to tip when expanded!&nbsp;The corny sword is the thing you&#39;ve been waiting for every day since you heard about 3D printing swords.&nbsp;All you need is 4- 6x3mm magnets to seamlessly connect the tip to the pommel.&nbsp;The cap is designed with you in mind! For those who really like to fight and will end up breaking the blade, the blades are easily replacable! Just unscrew the corn cob cap and insert a new set of cob saber blades!&nbsp;Printing can be done purely in single colors plates. &nbsp;For more of my telescoping weapons, check these out:The Karrotana: <a target="_blank" href="https://makerworld.com/en/models/148358" rel="nofollow noopener">https://makerworld.com/en/models/148358</a>Banana Saber: <a target="_blank" href="https://makerworld.com/en/models/118301" rel="nofollow noopener">https://makerworld.com/en/models/118301</a>The Pickle Sickle: <a target="_blank" href="https://makerworld.com/en/models/190877" rel="nofollow noopener">https://makerworld.com/en/models/190877</a>7ft Bo Staff: <a target="_blank" href="https://makerworld.com/en/models/413159" rel="nofollow noopener">https://makerworld.com/en/models/413159</a>&nbsp;&nbsp;&nbsp;&nbsp;

Sword on the Cob - The Retractable Corn Saber

silly

warrell72

OverviewThis Pokedex replica provides a convenient and stylish way for Pokémon TCG players & collectors to store, showcase, and access their rarest Pokémon cards, resembling the iconic Pokedex from Kanto.&nbsp;Parts count: 9&nbsp;Key Features<ul><li>Main body prints in place with hinge using only 4 colors</li><li>Additional 4 color components print separately and glue in place.</li><li>Multiple card insert variants:<ul><li>PSA</li><li>Beckett</li><li>CGC</li><li>Get Graded</li><li>Ultra Pro OneTouch Cases</li><li>Ultra Pro Top Loader</li><li>Solid for custom sizes</li></ul></li></ul>Printing Details&nbsp;Recommended filaments:<ul><li>Pokedex: eSun Pla+ AA Cold white, AI Fire engine red, AW-Light Blue, AD Black</li><li>Top Lights: eSun PLA+ AJ-Red, AP-Yellow, AT-Peak Green</li><li>Bottom Buttons: eSun PLA+ AJ-Red, AV-Blue</li><li>Screen: eSun PLA+ AT-Peak Green</li><li>Door Light: eSun PLA+ AP-Yellow</li></ul>Hotend: 0.4mm Hardened SteelPrint time: 6.5hrs&nbsp;Printing Tips:<ul><li>Use the provided print profiles for best results.</li><li>Inserts best printed in TPU or other flexible filaments, but work fine in PLA as pictured.</li></ul>Assembly<ul><li>You will need:<ul><li>x3 Top lights printed in Red, Yellow & Green which glue in the top of the main body</li><li>x2 Bottom buttons printed in Red and Blue which glue in just below your card</li><li>x1 Screen printed in Green which glues in just below the red and blue buttons</li><li>x1 Door light printed in yellow which glues in the empty slot on the door</li></ul></li></ul>

Pokedex Card Holder - Pokemon

TCG stuff 

JamesThePrinter

Mario themed display stand for your Game Boy Advance. It can be printed as an overworld or underground level.&nbsp;Print SettingsSupports are required for the pipe only. Although the pipe can be printed in more than one orientation, I recommend printing as is. This will hide any support scarring underneath your GBA.&nbsp;Assembly InstructionsPress the pipe firmly onto the base in the correct orientation. I recommend gluing in place once you've confirmed the orientation.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Amolen Red Wood PLA</li><li>polymaker PolyTerra Forrest Green PLA</li></ul>

Mario Themed GBA Display Stand

Nintendo consoles 

Jan Design

Tekken Logo Display

signs

3DMagpie

These started as signs for my own use vendor fairs and pop ups that would show off the multicolor printing capabilities of Bambu Lab printers alongside the prints. I couldn&#39;t find anything remotely like what I had in mind so here we are. The signs measure apprx. 101 mm x 62 mm x 2 mm. The lettering is set to apprx. 1 mm. They do vary slightly particularly in thickness because I designed them in Bambu Studio.&nbsp;These came out great for my needs. My hope is they&#39;ll help out other local sellers, too. Some stuff that may help:<ul><li>I&#39;m new to 3D model development so set expectations accordingly. I have tested most of the versions but not all. Let me know if you bump into any issues, and I&#39;ll do my best to fix it and learn along the way. We all gotta start somewhere!</li><li>The main print profile has all the signs face down for that fantastic surface quality. They look great on the Textured PEI plate. I&#39;d love to see Cool Plate and some of those PEO finishes!</li><li>Euro Print Profile for AMS now available with two raw print file versions for both AMS and layer height changes for non-AMS printers. I have NOT finished test printing all variations yet but wanted to get these files available per request. Please inspect your slices carefully before printing! I&#39;m fighting Bambu Studio to get these to line up on the face. When in doubt you may want to print face up and play with your top surface settings instead.</li><li>I included a second 3MF for easier text editing. USE WITH CAUTION! The text goes whacky as soon as you Edit Text in the By Object view. This is not a me thing…it&#39;s a slicer software limitation we&#39;re working around.<ul><li>Bambu Studio doesn&#39;t offer an align feature, so you have to manually adjust z height and sometimes X and Y angles. It&#39;s even worse if you try to edit face down.</li><li>After you with that battle, if you want the cleanest surface finish you&#39;ll need to flip the sign face down and then do some fine tuning after slicing to get the faces flush. (I found adjusting the Y axis 180 degrees to be easiest.)</li></ul></li><li>For those not familiar, STL&#39;s as always are just the geometry. Each was made with separate objects for the sign and text, so if you do want to download just one or two and manually Paint in Bambu Studio it should be a snap with Fill.</li></ul><figure class="image image_resized image-style-side" style="width: 35.75%"><a href="https://makerworld.com/en/models/417013#profileId-319350" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000050853/design/2024-04-06_373c9ecb61763.jpg"></a></figure><h3>NEW! I&#39;ve designed a <a target="_blank" href="https://makerworld.com/en/models/417013#profileId-319350" rel="nofollow noopener">new set of price signs</a> with built-in stands that are a bit smaller, use less filament, and require less print time. I use a mix of both in my pop-up booth! These are the new ones. &gt;&gt;&gt;</h3>Past updates to this original design:&nbsp;ADDED November 26, 2023: Euro Print Profile as well as 3mf versions for AMS and non-AMS change at layer height in the raw print files. WARNING these are raw files and work in progress in response to request. Please check your slices carefully for any errors. Comments alerting me to any issues are welcome so I can fix them!&nbsp;REVISED November 2, 2023: Fixed floating regions on the $12 and $25 signs thanks to a heads up they were failing from a commenter. I&#39;ve replaced the main Print Profile and Face Up 3MF raw file for customization. I also replaced those two STL&#39;s with revised versions.

Price Signs with Oval Stands (Dollar & Euro)

convention 

Randomizy

Uku & Lele are the embodiment of joy and harmony 🌋💕&nbsp;Uku, with a heartwarming smile that brightens even the cloudiest day fills the air with his dreamy melodies and Lele is his equally delightful counterpart, radiating joy and positivity.&nbsp;Together, they create a world where music and happiness intertwine, spreading positivity wherever they go.&nbsp;Just like a sunbeam and a gentle breeze, Uku & Lele are a delightful duo that remind us all to embrace the simple joys in life 🌋💕- - -No support needed.---Get more freedom on this design by customizing even more its base and enjoy an easier printing process thanks to the several splitted parts available for my supporters and the chance to get the multicolor files (on demand) on my links here: <a target="_blank" href="https://linktr.ee/Randomizy" rel="nofollow noopener">https://linktr.ee/Randomizy</a>- - -For any inquieries, please don't hesitate to contact me.---Please don't be shy and upload your make!(If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!)---Check out my Instagram to see all of my works: <a target="_blank" href="https://www.instagram.com/randomizy.3d/" rel="nofollow noopener">https://www.instagram.com/randomizy.3d/</a>---If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and models, and you're interested in having a commercial license for selling your physical printouts of my designs (not files), please consider checking out my link: <a target="_blank" href="https://linktr.ee/Randomizy" rel="nofollow noopener">https://linktr.ee/Randomizy</a>

Uku & Lele (Lava) (Fanart)

Disney 

Bottega 3D

Please read pdf for full instruction.&nbsp;I kindly ask you to post pics of the prints on social using the tag: @bottega.3dthis would help me a lot and push me to post more free models.&nbsp;This dragon is very easy to print. In my opinion best size is 120%. I printed with bambulab at a high quality setting and a 0.16 layer. I use the brim for safety, but in the large version it may not be necessary. Good calibration and retraction is necessary for a great result.For personal use only All my files are protected by Copyright, should NEVER be shared, resold or remixed. To legally sell physical print of my design visit: <a href="www.bottega3d.com" rel="nofollow">www.bottega3d.com</a>Settings: NOZZLE: 0,4 mm. LAYER: 0.16 – 0.20 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO Z-HOP: 0.8 BRIM: If necessary&nbsp;

Yuari, baby magical Dragon, articulated

Flexi

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

Home

the office

Powerpill.prints

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_482e88eb7e05f.png"></figure>This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go! Most keychains take between 30 minutes to an hour to print! This Eevee Evolutions pack includes the following Characters: Eevee, Flareon, Espeon, Vaporeon, Jolteon and Umbreon! <a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">The three evolutions: Glaceon, Leafeon and Sylveon are in Pack #8</a> <a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener"><img class="image_resized" style="width: 30.97%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-14_3ab95d58e1041.gif"></a><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_dc330ce646168.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_0a2962a7126e5.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-07_358b5b8be1e3a.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-26_3bc2fc5b971f6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/213311#profileId-232885" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-02-29_2d186746f8aae.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/213311#profileId-232885" rel="nofollow noopener">Pokemon Keychain Pack #5</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/234438#profileId-250977" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-03-04_2b0f305261921.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/234438#profileId-250977" rel="nofollow noopener">Pokemon Keychain Pack #6</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/253647#profileId-270086" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_c11965538aa41.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/253647#profileId-270086" rel="nofollow noopener">Pokemon Keychain Pack #7</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/472759#profileId-382643" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_7037cee7c2094.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/472759#profileId-382643" rel="nofollow noopener">Pokemon Keychain Pack #8</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/503298#profileId-418741" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-06-18_ee2dfb693b7bd.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/503298#profileId-418741" rel="nofollow noopener">Pokemon Keychain Pack #9</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_4b712df4c57ba.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_ed5d31eadc8b3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_2f3f64f70a6df.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_366891a0ec5ab.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_d454162579477.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-01-15_9db4c750c919b.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Hope you Catch, er, Print them all!! Like this pack? Check out my other video game keychain packs here:<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_1b51dac6130d8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_3888685c1d948.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/197958#profileId-218564" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_231c0706c647e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/197958#profileId-218564" rel="nofollow noopener">Nintendo Classics Keychain Pack</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/442832#profileId-348820" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_6d105be145fb8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/442832#profileId-348820" rel="nofollow noopener">Pac-Man Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/399835#profileId-301320" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_8201d7f9605df.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/399835#profileId-301320" rel="nofollow noopener">Yoshi Keychain &amp; Magnet Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000144042/design/2024-05-17_7b7272f64e966.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Pokemon Keychain Pack #2 - Eevee, Glaceon, Espeon

Pokemon 

theurbanarmorer

A fancy sign worthy of Asmodeus himself. This lightbox is modeled after the Ozzie's Sign from Helluva Boss. It's meant for 4 colors, large and in charge, printing in two pieces on 2 plates at 100% scale it takes up most of the print bed.&nbsp;The back has integrated in keyhole hangers, and due to it's large size I would suggest you put a few LEDs in the center on the backplate and not just on the walls of the box for maximum light distribution, though it's not mandatory if you don't mind it a little dimmer towards the center.