user_1751359940

andrzeju

Flexi Llama

Big Daddy

Lexx_3D

This is the inner pot for my Modern Planter - Fence-Style. It has a waterindicator to see how much water is left. You have to stuff the underpart with styrofoam so that it floats. But be careful because this part is very fragile.Before planting:Please make sure that the rod is up to the top line of the cap when the water level is full (water up to the top edge of the inner pot). If this is not the case, then measure approximately the height of the rod from the cap and feel free to contact me! I will send you a new cap.stl with your measurements.Dimensions:<ul><li>inner diameter at the top: ~124.2mm  /  ~157.2mm</li><li>inner diameter at the middle part: ~119.8mm  /  ~151.8mm</li><li>inner height: 99.8mm  /  78.8mm</li><li>height water reservoir: 36.6mm  /  46.1mm</li><li>wall thickness: 1.2mm</li></ul>Settings:<ul><li>layer height: 0.2mm</li><li>line width: 0.42mm</li><li>wall loops: 1</li><li>NOTE: please be sure to print the threads in max. layer height 1mm  !!!!</li></ul>Note:As you scale the pot the wall thickness will also change. Feel free to contact me for other Dimensions!127mm pot: I haven't printed this diameter in the new design yet, so I haven't created a proper cap for it yet.&nbsp;Update:<ul><li>2024/03/24: New design for the inner pot and new diameter (160mm)</li><li>2024/01/30: Changed hole sizes of cap and underpart.</li></ul>&nbsp;Feel free to upload your makes!

Selfwatering Planter - inner Pot for Fence Pot

kristyn

Byrd Anthony

Decided to make some more mini Horror magnets for my girlfriend to put on our fridge.&nbsp;Figured I would share the file for any horror movie fans out there.&nbsp;Magnets used:<a target="_blank" href="https://www.amazon.com/260Pcs-Refrigerator-Magnets-Fridge-Whiteboard/dp/B07XRQ44VC/ref=sxin_14_pa_sp_search_thematic_sspa?content-id=amzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5%3Aamzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5&crid=16SM8BUAUUSAK&cv_ct_cx=6x2%2Bmm%2Bmagnets&keywords=6x2%2Bmm%2Bmagnets&pd_rd_i=B07XRQ44VC&pd_rd_r=73459101-e2b3-479a-891a-be1d8b476c0c&pd_rd_w=oYJlo&pd_rd_wg=C7Ptz&pf_rd_p=432a6361-82bd-4986-a20f-2d4d577f5af5&pf_rd_r=9930GADJGK5E3VR0SZH9&qid=1706363364&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=6x2%2Bmm%2Bmagnets%2Caps%2C72&sr=1-1-3f7eb011-4703-48ad-8058-43dbff1e6b87-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1" rel="nofollow noopener">Amazon.com: VNDUEEY 300Pcs Refrigerator Magnets, Small Magnets, Fridge Magnets, Whiteboard Magnets, Tiny Magnets, Round Magnets, Mini Magnets for Crafts, Miniatures, Nails, Office, Kitchen : Industrial & Scientific</a>

Horror Set 2 Magnets

Wojciech Kawa

Stand for three plates for the A1 mini printer. Two versions available, one in three colors, the other in one color with recesses with an inscription and logo.&nbsp;I have published versions for 4 plates - the project can be downloaded <a target="_blank" href="https://makerworld.com/en/models/198206#profileId-218787" rel="nofollow noopener">here</a><a target="_blank" href="https://makerworld.com/en/models/198206#profileId-218787" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/568896/2024-02-22_99b4565a8fef1.png"></a>

A1 mini Plates Holder

Mimi

PrintMa

I designed a planter that looks like a woven basket.&nbsp;The dimensions of the planter are as follows:&nbsp;Internal dimensions: Diameter: 71mm Height: 64mm&nbsp;External dimensions: Diameter: 88.5mm Height: 70mm&nbsp;I would love to see your prints, so if you make one, make sure to post a picture at makes.&nbsp;If you like my designs or have any questions, leave a comment and maybe a little tip.&nbsp;Tips at: <a target="_blank" href="https://www.buymeacoffee.com/printma" rel="nofollow noopener">https://www.buymeacoffee.com/printma</a> <3&nbsp;The use for commercial purposes is prohibited. Please note the chosen license.&nbsp;If you would like to purchase the finished pot, please visit my website: <a target="_blank" href="https://printma.net/products/blumentopf-korb-optik" rel="nofollow noopener">https://printma.net/products/blumentopf-korb-optik</a>&nbsp;I hope you enjoy this design!<h4>Print Settings</h4><h4>Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament brand: Bambu Lab Filament color: white/black Filament material: PLA</h4>

Big Daddy

kristyn

AMS

Mimi

plant stuff