0.2mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

Optimized Z seam, spaghetti, 0.16mm layer height, 3 walls, 20% infill

Optimize Z seam, change infill distribution for more lasting 0.16mm layer height, 2 walls, 15% infill

(Recommended) Optimized spaghetti, Z-seam, center of gravity, for a longer spin time and higher success rate 0.16mm layer height, 3 perimeters, 15% infill

0.16mm layer, 2 walls, 15% infill

0.16mm layer, 3 walls, 20% infill

Sequential printing, optimize Z seam, separate plates, variable layer height (not compatible with A1 mini), 0.16mm layer, 3 walls, 20% infill

0.2mm layer, 2 walls, 8% infill

Monochrome version Print part by part 0.16mm layer height, 3 walls, 40% infill

Higher wall thickness and infill for increased strength 0.2mm layer, 4 walls, 60% infill

Single plug Optimized Z-seam Increased walls and infill for improved strength 0.16mm layer height 3 walls 40% infill

0.2mm layer, 3 walls, 20% infill

More walls, higher strength 0.2mm layer, 3 walls, 15% infill