user_172854799

BENOengineering

I developed this vertical planter tower to grow strawberries outside, but obviously it is suitable for every small, edible plant you want to grow, for example lettuce, salad etc.The main advantages are:<ul><li>It is using normal soil as a growing medium</li><li>its equipped with a water distribution system, so every plant is getting the same amount of water</li><li>the watering is controlled by a water reservior in each section, so the plants are getting just the right amount of water each day. The rest of the overflowing water will exit on the bottom.</li><li>it can be connected to an irrigation system, if you dont want to water manually each day</li><li>on the bottom you can optionally attach a protection against snails</li><li>the venting openings prevent the soil from getting moldy</li><li>the tower can be fixed to the ground with printed nails or ground screws, stl&#39;s inlcuded (for a maximum of 3 modules)</li><li>alternatively you can fix the tower to the wall, so it doesnt tip over (for 4 modules or more its strongly recommended)</li></ul>As its intended to be used outside, the best material for all components is PETG or ASA, as they are resilient against UV radiation.For using, just snap together the parts, fill the modules with good quality soil (potting soil), put the plants or seeds in and dont forget to water every day. You dont need to pour water on the soil directly, the smart water distribution system will do the job for you.&nbsp;If you want to connect the tower to your irrigation system:<ul><li>print the planting modules for the “automatic irrigation”</li><li>insert one M4 heat insert into the hole of the top part, put an M4 screw in. This can be used as flow control, by squeezing the irrigation tube. Set to minimal flow, because the rest of the water will drain at the bottom anyway.</li><li>connect the standard 5mm small irrigation tube on the top part.</li><li>set the irrigation timer to 10 minutes per day.</li></ul>

Planting tower - with a smart watering system 

plant stuff

Dr.Mussy

<h3>Don&#39;t forget to &#34;Click A Like&#34; &amp; check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, PLZ leave a comment what you want next!</h3>V2 is out all the issues fixed  https://www.thingiverse.com/thing:6669713  ACCESSORIES: <a target="_blank" href="https://makerworld.com/en/models/481073#profileId-392736" rel="nofollow noopener">https://makerworld.com/en/models/481073#profileId-392736</a>  -Mongolian Style Release <a target="_blank" href="https://makerworld.com/en/models/486891#profileId-399732" rel="nofollow noopener">https://makerworld.com/en/models/486891#profileId-399732</a> -XBow Sight by Durbanpoisonpew<a target="_blank" href="https://makerworld.com/en/models/490905" rel="nofollow noopener">https://makerworld.com/en/models/490905</a> - Broadhead Organizer (X-Bow Accessories)<a target="_blank" href="https://www.thingiverse.com/thing:2695878/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2695878/files</a> -Fishing Accessories&nbsp;This was requested by one of my followers, its &#34;still in the works&#34; because i wanted a professional archer to give it a go and give me feedback on how well it works as I&#39;m no expert and I only shoot bows for fun.Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn&#39;t affect shooting much so you can def get away with just solid pulley.Print Settings: 25% infill 8 walls on most parts except the pulley, Band Mounts &amp; WB which I used 12 to make sure it does not flex Supports only for the frame, NO Brim or Raft required, Long and easy print ;)BOM: Pully: M6 60mmL Furniture screw x2Optional Flanged Bearings x4 (F696zz)Grips: M3 12mm L x2 3mm 22mm L x2Rubber Holders: M5 30mm L x2Band Aligners: 3mm 14mm L x4 pinsP Rail: M3 20mm L x1Attachments/Accessories: M6 40mmL Furniture screw + Barrel nut (Some require more than one set)Fishing Reel: Winding Handle M6 60mmL Furniture screwSpool M6 60mmL hex screw + Lock Nut Bands cut 50mm from each end to give you the equivalent of a 30lb bow at 28&#34; draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L... <a target="_blank" href="https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html" rel="nofollow noopener">https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.html</a>VIDEOS: <figure class="media"><oembed url="https://www.youtube.com/shorts/coq2-F3OdlM"></oembed></figure><figure class="media"><oembed url="https://www.youtube.com/shorts/lVDLl8R8F2E"></oembed></figure>If you are interested in other prop firearms, Airsoft parts and designs or need help with the build then do join our group on Matrix: <a target="_blank" href="https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/%23GCI-General:matrix.org" rel="nofollow noopener">https://app.element.io/?pk_vid=f12152aac29bbc4a166549437941781a#/room/#GCI-General:matrix.org</a>!!!Note: I&#39;m always open for suggestion and help on improving the design and proof of concept.!Don&#39;t forget to hit the LIKE! &amp; check out my other Cool designs &amp; Follow my Weekly dose of KooKoo uploads ;)

Survival X-Bow

toys

BATTCAVE

Skull Valve Stem Caps for Cars &amp; Bicycles, Etc.&nbsp;Will work on any Schrader valve stem with clearance.&nbsp;Need some for Presta? Head on over here: https://makerworld.com/en/models/500782#profileId-415818&nbsp;Printed in solid PETG for maximum durability and weather resistance.&nbsp;Profiles for ONE, One Pair and Two Pair for easy printing.&nbsp;Examples printed in Sunlu White PETG.&nbsp;Get to Cap&#39;n!

Skull Valve Stem Caps for Cars & Bicycles, Etc

car stuff

PenguinHerder

Customizable toolbox labels. Use OpenSCAD to customize the text of the label. Then print it out and use double sided tape to adhere to a toolbox, shelf or other surface.&nbsp;Please share your makes!&nbsp;Edit**Increased label height from .4mm to .8mm to eliminate transparency.&nbsp;Recommended layer height of .2mm&nbsp;Physical dimensions can be adjusted to match a factor of your favorite layer height in OpenSCAD.

Tool Box Labels

oraganization 

jf.marinaoka

I have a Lincoln welder square wave tig welder and a arbor freight welding cart! the argon bottle dosen't fit verry well so I found this file on Thingiverse and I modifie it to fit my setup!!!! if you like it please like, rate and share thanks

Argon bottle tank bracket for welding

hardware

BrooklynBravest

Magnetic knob that clips onto milwaukee M12 cordless ratchet. Was modeled off of a 3/8" fuel m12 ratchet unknown if other milwaukee ratchets share same dimensions. Allows for easy direction changes especially when wearing gloves. &nbsp;Requires two, 6mm x 3mm neodymium magnets.

plant stuff

toys

car stuff

oraganization

hardware

m12

makita tools