user_1724075680

sd881116

自己在装机过程中发现蜗牛1S摄像头无法安装，自己建模适配了一下ACK80机架建议使用TPU打印

ACK80安装蜗牛1S——lite摄像头转接件

飞机

3DP RNS

[3DP RNS] Hexa Base_Repair Machine Arm_V1.0 (3D Printed Robot Stand)<ul><li>Hexa Base_Repair Machine Arm [<a target="_blank" href="https://youtube.com/shorts/82vQRVelgEw?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>Only the machine arm data has been uploaded.</li><li>To print the robots, please go to links [<a target="_blank" href="https://makerworld.com/en/models/117513#profileId-128541" rel="nofollow noopener">Worker</a>], [<a target="_blank" href="https://makerworld.com/en/models/127888#profileId-138393" rel="nofollow noopener">Headless</a>], [<a target="_blank" href="https://makerworld.com/en/models/149628#profileId-163290" rel="nofollow noopener">Spi</a>], [<a target="_blank" href="https://makerworld.com/en/models/159841#profileId-175491" rel="nofollow noopener">Hexa Base_Stand</a>].</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ NoticeHello, friends!Thanks for printing [Worker], [Headless], [Spi], [Hexa Base_Stand].This is a Machine Arm designed for exhibition, showcasing the scene of repairing robots.Use it for your robot :)<figure class="media"><oembed url="https://www.youtube.com/shorts/82vQRVelgEw"></oembed></figure>

[3DP RNS] Hexa Base_Repair Machine Arm_V1.0

玩具

Scott711

This is a print in place winding spool I designed for standard length soft measuring tapes (60" / 150 cm) having width up to ¾" / 20 mm. If you need a version for a 120"/300cm soft tape, you can find it <a target="_blank" href="https://makerworld.com/en/models/380358#profileId-280542" rel="nofollow noopener">here</a>.&nbsp;After removing from the print bed, use a little force to free the spool from some small support, and run the spool back and forth a few time to smooth it out. Putting a few drops of light oil in the top center hole will make it run even smoother. I've printed in both matte and basic PLA with good success.&nbsp;Do not use supports. You may get a floating regions warning from your slicer telling you to use supports or to reorient, but print the model bottom side down without supports. I also suggest using 0.2mm layer height if you choose not to print with the uploaded .3mf print profile.

Soft Tape Measure Spool - Print in Place

家用

sandro.iacobelli

Accessory to protect the purge launch.It is possible to combine with my Bambu Lab A1 excrement bucket : <a target="_blank" href="https://makerworld.com/it/models/121906#profileId-131241" rel="nofollow noopener">https://makerworld.com/it/models/121906#profileId-131241</a>&nbsp;

飞机

玩具

家用

工具