user_1708786078

TERRAIN 3D

A can koozie with a Native American-inspired design. Fit&#39;s in most vehicle cup holders!

Native American Inspired Can Cooler / Koozie

native american coozie

Powerpill.prints

<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-18_5fb8e169839cd.png"> This pack has been all set up for super simple and easy printing with the AMS or AMS lite!All the models are set to 2 - 4 Colours! Just load your filament, slice and go!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed these keychains, please consider boosting to support the creator. Thank you!</boostcontent></boostme>Most keychains take between 45 minutes to 1.5h to print!<h2>This Keychain pack has 50 items in it separated onto 36 different plates! Games included:</h2><h3>Metroid, Zelda I &amp; II, Duck Hunt, Super Mario Brothers, Dr. Mario, Punch Out, Donkey Kong, Ice Hockey, Excitebike, Balloon Fight, Kid Icarus, and Ice Climber!</h3><h2>Check out My other Video Game Keychain Packs here:</h2><figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/136252#profileId-148211" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bf102988c5d4e.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/136252#profileId-148211" rel="nofollow noopener">Super Mario Bros. 3 Keychain Pack</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/177083#profileId-194702" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_af8e11b72f8b8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/177083#profileId-194702" rel="nofollow noopener">Pokemon Keychain Pack #4</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/121800#profileId-131121" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_d591f34521b71.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/121800#profileId-131121" rel="nofollow noopener">Pokemon Keychain Pack #1</a></td></tr></tbody></table></figure>All models have been test printed on the A1 Mini with the AMS Lite!  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_65642b6d44be1.png">I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there&#39;s one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!&nbsp;I purchased my <a target="_blank" href="https://www.amazon.ca/gp/product/B07DC9YZXV/" rel="nofollow noopener">keychain set from Amazon</a> if you&#39;d like to get something similar!&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_39c8a218834e3.png">All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5772d38e54629.gif"></figure>I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-15_c5fc221922c1c.webp"></figure>If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn&#39;t think the increased print time was really worth the extra quality. It&#39;s definitely noticeable, but I didn&#39;t think the tradeoff was there. Feel free to experiment and try it yourself!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_e1de8136a8cba.png">Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_652472aa40ac8.gif"></figure>Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you&#39;re not printing extra layers though!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-20_5bb325e63de11.gif"></figure>If you notice any settings that could be changed or improved, please let me know! I&#39;d love to make any adjustments necessary so they all print great! If there&#39;s any other packs or characters you want to see, leave a comment! Like this pack? Check out my other video game keychain packs here:  <figure class="table" style="height: 261.055px; width: 960px"><table style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/172935#profileId-189959" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-02-16_bee3dac9a4a4f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/172935#profileId-189959" rel="nofollow noopener">Pokemon Keychain Pack #3</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/162397#profileId-178258" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_ca2f6c28ed6ef.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/162397#profileId-178258" rel="nofollow noopener">Kirby Keychain Pack</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/144042#profileId-156624" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_1f9887d1aa63b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/144042#profileId-156624" rel="nofollow noopener">Pokemon Keychain Pack #2</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/128878#profileId-139600" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000197958/design/2024-01-29_c6b1251ef82d6.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/128878#profileId-139600" rel="nofollow noopener">Undertale Keychain &amp; Wall Art Pack</a></td></tr></tbody></table></figure>

Nintendo Classics Keychain Pack

keychains

mgallimore32

Created to go with the Mask display stand below. <a href="https://www.printables.com/model/543261-mask-helmet-display-stand" rel="nofollow">https://www.printables.com/model/543261-mask-helmet-display-stand</a>&nbsp;&nbsp;

Halloween Nameplate Mask Stand

Horror

WhatIsHeBuildingInThere

This is a small shelf supported by a skull instead of a conventional bracket. The profile of the shelf is also lined with skull impressions. Very cool unique Goth aesthetic home decor. The shelf was also designed with a tapered pocket in the back so it can easily be hung flush on the wall with picture hanging nails. It was printed in Esun black PLA and Esun Bone White.1 color change and a fairly fast print. I've also printed on a rainbow PEY holographic build plate with neat results. Enjoy :)

Human Skull Shelf

shelves

Dukester

3d Printed Corn Cob Holders &nbsp;a game-changer in your summer grilling experience! Say goodbye to messy cleanup and hello to effortless indulgence with our innovative design. Crafted for convenience and sustainability, these corn cob holders use toothpicks instead of traditional metal skewers, allowing you to savor every corn on the cob hassle-free.🌽 Features:<ul><li>🚀 Easy Assembly: Simply 3D print the model and you're ready to roll!</li><li>♻️ Disposable Toothpicks: No more scrubbing or soaking – toss them away for a stress-free cleanup.</li><li>🌞 Perfect for Summer BBQs: Elevate your outdoor gatherings with these stylish and functional corn cob holders.</li></ul>📜 Instructions:&nbsp;Print Model: Use your 3D printer to bring these unique corn cob holders to life. multiply the models on the build plate and print as many as you need. The sleek design ensures both durability and aesthetic appeal.&nbsp;Insert Toothpicks: Effortlessly slide toothpicks into the designated slots, securing them in place. The toothpick design not only simplifies setup but also allows for easy disposal after use.&nbsp;Insert into the Corn: Gently insert the holders into the ends of the corn on the cob. The secure grip provided by the toothpicks ensures stability, allowing you to enjoy your corn without the fear of it slipping away.&nbsp;Enjoy: Grill, roast, or boil your corn to perfection, knowing that our 3D Printed Corn Cob Holders have your back. When you're done, dispose of the toothpicks for a quick and eco-friendly cleanup.&nbsp;Versatile Design: Whether you're hosting a backyard barbecue, camping, or just enjoying a quiet dinner at home, these corn cob holders add a touch of innovation to your culinary adventures.&nbsp;Upgrade your corn on the cob experience with our 3D Printed Corn Cob Holders – because simplicity and enjoyment should always go hand in hand! 🌽✨

Corn Cob Holders

kitchen 

Thefrozenone92

Have a skull like pen holder for your desk at work or at home.Store your pens and other things in style

Skull Pen Holder

Work

Sevro

OverviewAn ethereal and light statue that shows love in artish style.&nbsp;I found that picture on internet as a tattoo on somebody arm and I had to bring it to the world of 3d printing. I recreated and changed it a bit so that it could be printed and presented properly. I don&#39;t know who is original author of this drawing.&nbsp;InstructionPrint and put in bottom base to achieve vertical pose, no glue is needed.To print it, there is need good adhesion to bed.Upper end of sculpture is bond with initial printer starter extrusion. It prevent roll up this section of model. Cut it after print.&nbsp;Update:17.12.23 version 2I made thicker version 2 mm so statuette is more rigid. Previous one 1 mm was too weak and flexible.19.12.23 version 3I changed a little design so it is yet more rigid and does not bend over time.09.01.23 version 4I added alternative larger base to second plate, because some users in comments section said that default base is too weak.

Ethereal Kiss Statuette

Vadra

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Polymaker v2 print profiles are the original print profiles updated with new models. They're redesigned based on user feedback and also use 30-40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Notes:<ul><li>I've tested with several POLYMAKER PolyTerra spools and the diameters tend to vary slightly.</li><li>The Polymaker.A model fits most of my POLYMAKER spool rims. Polymaker.B has a slightly smaller inner diameter. I use both of these models on my spools.</li><li>It is possible to have Polymaker.A fit on one side of a spool and Polymaker.B fit on the other side.</li><li>The size of the holes on the spool is NOT an indicator of spool diameter from my experience.</li><li>Tested on PolyTerra spools but also may be compatible with PolyLite, PolyMax, and PolyWood.</li><li>Shown as printed with Bambu Lab PLA Basic at 0.2mm</li></ul>Features:<ul><li>Reusable</li><li>POLYMAKER nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print Polymaker.A and test BOTH SIDES of the POLYMAKER spool to see if it fits snug. If the ring is too loose for either side then print Polymaker.B and test again.</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

POLYMAKER PolyTerra Bambu Lab AMS Cardboard Spool Adapter Ring

Printer Accessories 

Jal Shah

Recently I went to Vegas for some fun and came across a lamp in my hotel room. This lamp was quite lightweight and almost portable. The only issue was it was connected to a long cord. So, I decided to create my own portable LED lamp that I can light up using batteries and also be able to recharge the lamp without having to take batteries out and replacing. With that vision in mind, I designed this lamp.&nbsp;I printed multiple of these lamps, and I use them on my work desk, dinner table and different places in my house. I also wanted to avoid 3D printed look on this lamp, so I have done some post-processing which I will explain in detail below.&nbsp;Also, as usual, I have uploaded RAW step files for anyone to be able to customize it based on their needs. (I hope more and more makers start sharing step files for easier modifications.)<h2>Print Settings</h2><ul><li>Use 0.16mm High Quality profile for better look and quite less post processing.</li><li>Main Body doesn't need supports as printer can bridge without any issues, but if you're having issues with bridging, then enable supports. Very small surface requires supports anyway.</li><li>Top Cover should be printed with larger circle on plate and supports enabled.</li><li>Diffuser must be printed in Spiral Vase mode with 2 bottom layers, 0 top layers and 0.45mm line width for all.</li></ul><h2>Required Hardware</h2><ul><li>18650 Rechargeable Battery 3.7V -- <a target="_blank" href="https://amzn.to/3Sbe3mC" rel="nofollow noopener">https://amzn.to/3Sbe3mC</a></li><li>Constant Current Adjustable Module -- <a target="_blank" href="https://amzn.to/4b7lGDd" rel="nofollow noopener">https://amzn.to/4b7lGDd</a></li><li>High Power Led Chip 3W (Different temp and colors as per your desire) --- <a target="_blank" href="https://amzn.to/3SfUHN0" rel="nofollow noopener">https://amzn.to/3SfUHN0</a></li><li>LED Heat Sink -- <a target="_blank" href="https://amzn.to/3HxTXhf" rel="nofollow noopener">https://amzn.to/3HxTXhf</a></li><li>Type-c USB 5V 1A 18650 Lithium Battery Charger Module -- <a target="_blank" href="https://amzn.to/494u4Bw" rel="nofollow noopener">https://amzn.to/494u4Bw</a></li><li>18650 Battery Clip -- <a target="_blank" href="https://amzn.to/3u3gWxN" rel="nofollow noopener">https://amzn.to/3u3gWxN</a></li><li>Rocker Switch ON/Off -- <a target="_blank" href="https://amzn.to/3u5qcBu" rel="nofollow noopener">https://amzn.to/3u5qcBu</a></li><li>Soldering materials and wire</li></ul><h2>Post-Processing Steps</h2>Remember, these are the steps that I took. You do not have to do this, but it will surely make the lamp look much better and additionally the time required will be quite less if you printed with 0.16mm high quality profile. Overall time for post-processing was little less than hour excluding the drying wait time.<ul><li>Lightly sanded main body at the seam with 180 grit</li><li>Fill the seam with Bondo Spot Putty – <a target="_blank" href="https://amzn.to/4b6PmjH" rel="nofollow noopener">https://amzn.to/4b6PmjH</a></li><li>Lightly sanded seam again to make it smooth with 180 grit</li><li>Used filler primer on all bodies – <a target="_blank" href="https://amzn.to/3Oir1O2" rel="nofollow noopener">https://amzn.to/3Oir1O2</a></li><li>Lightly sanded all bodies with 180 grit for final time</li><li>Finally sprayed all bodies with regular primer and metallic rose gold paint</li></ul><h2>Assembly and Circuit Connection Steps</h2><ul><li>Refer to circuit diagram for electrical connections.</li><li>First insert “Rocker Switch ON/Off” and “Battery Charger Module” in main body. Use hot glue to secure it if needed.</li><li>Insert “Battery Clip” and “Current Adjustable Module” in bottom cover and secure them using hot glue.</li><li>Glue top disk onto top cover.</li><li>Secure LEDs on LED Heat Sinks. Connect LEDs with each other as per diagram. (I used 8 LEDs, but you can choose more or a smaller number of LEDs. Note that higher number of LEDs will discharge the battery faster.)</li><li>Secure LEDs at the bottom of top cover.</li><li>Finish circuit connections now. Make sure to insert diffuser before putting on top cover and running LED wires.</li><li>Turn on LEDs and adjust current appropriately. The higher current will make LEDs brighter and will make them run hotter. Make sure the current doesn't exceed LED max current limit. I used white (6000K) LEDs with max current for my desk and warm white (3000K) LEDs with lower current for soothing light on dinner table.</li><li>Once the current is adjusted, you can finish the assembly of the lamp.</li></ul>

LED Table Lamp - Rechargeable Battery Operated

lamp

SK07 Skipper07

This very high detailed model includes a very high detailed base, which is perfect to storage your candies or a gift for the upcoming Christmas season. The base Container model is surround by snow, trees and shining stars to catch the main theme of this print. The top is contains a snow base with a gingerbread house and three trees.

Christmas Cake Container

christmas

Waikikiprod

NEW VARIATION ! &nbsp;A printable fridge magnet without any support. Then just stick two magnets and you can give your fridge the style of a Viking!!!&nbsp;Choose the blade that matches the magnet you want to use ( d x h )<figure class="image image_resized image-style-align-right" style="width:30.96%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_h2bks6f0m5f6.jpg"></figure>Magnets : <ul><li><a target="_blank" href="https://www.amazon.fr/gp/product/B07GSNRY1M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=4ad34a6e8f15aa3f31ac519ac6464711&camp=1642&creative=6746" rel="nofollow noopener">10x2mm Neodym Magnet</a> (original 3D model)</li><li><a target="_blank" href="https://www.amazon.fr/SBS%25C2%25AE-magn%25C3%25A9tique-50-aimants-n%25C3%25A9odyme-extr%25C3%25AAmement/dp/B0187KV6BG/ref=sr_1_2?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=3VDRYDSPOHFLF&keywords=n%25C3%25A9odyme+12x2&qid=1658569332&s=kitchen&sprefix=n%25C3%25A9odyme+12x%252Ckitchen%252C752&sr=1-2&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=742e9ee30228836eef15c885b97edef6&camp=1642&creative=6746" rel="nofollow noopener">12x2mm Neodym Magnet</a></li><li><a target="_blank" href="https://www.amazon.fr/HHOOMY-Aimants-n%25C3%25A9odyme-Mini-aimants-r%25C3%25A9frig%25C3%25A9rateur/dp/B07Z8XRBNB/ref=sr_1_4?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=PPLS6XCE1ZNZ&keywords=n%25C3%25A9odyme%252B6x3&qid=1658570553&s=kitchen&sprefix=n%25C3%25A9odyme%252B6x3%252Ckitchen%252C128&sr=1-4&th=1&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=871c647ecafe9a8ccb1758d1a7676ccb&camp=1642&creative=6746" rel="nofollow noopener">6x3mm Neodym Magnet</a></li><li><a target="_blank" href="https://www.amazon.fr/Magnet-Expert-Ltd-mod%25C3%25A9lisme-lartisanat/dp/B004VRL0RK/ref=sr_1_8?__mk_fr_FR=%25C3%2585M%25C3%2585%25C5%25BD%25C3%2595%25C3%2591&crid=2CM932BDDCN6R&keywords=n%25C3%25A9odyme+8x4&qid=1658569538&s=kitchen&sprefix=n%25C3%25A9odyme+8x4%252Ckitchen%252C77&sr=1-8&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=38034c5a51285ba7b68a106a3e19fe9c&camp=1642&creative=6746" rel="nofollow noopener">4x8mm Neodym Magnet</a></li></ul><figure class="image image_resized" style="width:48.54%;"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-08-15_if5qr6kf263a.png"></figure><figure class="table"><table><tbody><tr><td style="background-color:#fa6831;">Resolution :</td><td style="background-color:#f9cd4218;">0.2mm or less</td><td style="background-color:#fa6831;text-align:justify;">Support :</td><td style="background-color:#f9cd4218;">NO</td></tr><tr><td style="background-color:#fa6831;">Infill :</td><td style="background-color:#f9cd4218;">10% Gyroide</td><td style="background-color:#fa6831;text-align:justify;">Raft :</td><td style="background-color:#f9cd4218;">NO</td></tr><tr><td style="background-color:#fa6831;">Material / Brand :</td><td style="background-color:#f9cd4218;"><a target="_blank" href="https://www.amazon.fr/3D-Filament-Arianeplast-m%25C3%25A9talis%25C3%25A9-Fabriqu%25C3%25A9/dp/B01N4EVU75/ref=sr_1_2_sspa?keywords=arianeplast+pla&qid=1659350919&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSTkxBM1dNWE9UUzMmZW5jcnlwdGVkSWQ9QTAwNjU1MzNONlFJOU43STBTUiZlbmNyeXB0ZWRBZElkPUEwMTQzMzM0MVRQWDhYOEdSRzNOMSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=e8eea1100bd823814010947938a1b48a&camp=1642&creative=6746" rel="nofollow noopener">PLA / Arianeplast</a></td><td style="background-color:#fa6831;text-align:justify;">Filament Designation :</td><td style="background-color:#f9cd4218;"><ul><li><a target="_blank" href="https://www.amazon.fr/Filament-recycl%25C3%25A9-Arianeplast-fabriqu%25C3%25A9-France/dp/B084DCSDBK/ref=sr_1_8?keywords=arianeplast+pla&qid=1659350919&sr=8-8&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=daec5f7fb048f3d37b3ed039f5a3028e&camp=1642&creative=6746" rel="nofollow noopener">Black Recycled</a>♻</li><li><a target="_blank" href="https://www.amazon.fr/3D-Filament-Arianeplast-m%25C3%25A9talis%25C3%25A9-Fabriqu%25C3%25A9/dp/B01N4EVU75/ref=sr_1_2_sspa?keywords=arianeplast+pla&qid=1659350919&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFSTkxBM1dNWE9UUzMmZW5jcnlwdGVkSWQ9QTAwNjU1MzNONlFJOU43STBTUiZlbmNyeXB0ZWRBZElkPUEwMTQzMzM0MVRQWDhYOEdSRzNOMSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&_encoding=UTF8&tag=waikikiprod-21&linkCode=ur2&linkId=e8eea1100bd823814010947938a1b48a&camp=1642&creative=6746" rel="nofollow noopener">Metallic Aluminium</a></li></ul></td></tr></tbody></table></figure>thank you to the donors to whom I authorize the right to sell the object made by them :<ul><li>Tashaz3d ➡ <a target="_blank" href="https://instagram.com/tashaz3d?igshid=MjljNjAzYmU=" rel="nofollow noopener">Instagram</a> | <a target="_blank" href="https://www.tiktok.com/@tashaz3d?fbclid=PAAaarv2TNBeMWf6XZz1p2K_iWly4RSMFUd3SD2vknarsRdNJ_-_s9UQX4bpI" rel="nofollow noopener">Tiktok</a> </li></ul>&nbsp;Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons </a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3378101082/draft/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>