user_1673163943

cyanidesugar

This is another Hueforge Hybrid print, where Cloud's Buster Sword ‘pops out’ of the print for a little personality. This print combines Hueforge filament painting methods with traditional 3D printing to create a lovely pop art style print. &nbsp;Important Note: This print has very steep overhangs with no supports for a majority of the sword, and tree supports for the tip. If you are using the 3MF for one click printing, all settings will have been applied to the model that slows the printing right down to accommodate this, with extra top, bottom and reinforced wall settings. &nbsp;If the one-click printing is not your thing, please see the instructions and recommendations below. &nbsp;Print instructions&nbsp;If you are NOT using the one-click file: <ol><li>Please ensure your settings for the ‘Buster_Sword.stl’ part of the print has been optimised for steep overhangs. </li><li>I highly recommend slowing down the print and increasing top and bottom surfaces, as well as having more walls. I used 4 walls, with 6 top and 6 bottom surfaces, with an infill of 15% gyroid for the sword. </li><li>Tree supports should also be used for the tip of the sword, with the supports ‘On the build plate only’. </li><li>Adjust your support interface settings so that they can be easily pulled off the print and not damage the surface of the sword. </li></ol>I used 4 filaments for this print, with one colour repeated for the silver highlights on Cloud, and the silver for the sword. &nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm for the Cloud part of the print. For the Buster Sword, print at 15% infill. &nbsp;Filaments Used: - PLA Kingroon Black Transmission Distance: 0.4 - PLA Sunlu Beige Transmission Distance: 8.2 - PLA Kingroon White Transmission Distance: 8 - PLA Polymaker Starlight Mercury Transmission Distance: 6 (&nbsp;Swap Instructions: - Start with Black - At 1mm swap to Starlight Mercury - At 1.32mm swap to Beige - At 1.8mm swap to White - At 2.12mm swap to Starlight Mercury (This is the sword!)&nbsp;The Buster Sword STL can be found <a target="_blank" href="https://www.thingiverse.com/thing:3882837" rel="nofollow noopener">here</a>, a model by <a target="_blank" href="https://www.thingiverse.com/ohman74" rel="nofollow noopener">ohman74</a>.&nbsp;Hope you have fun with this one! It's a personal favourite! &nbsp;&nbsp;

Cloud Strife with Buster Sword Pop Art - Hueforge Hybrid

浮雕

喵武士

由于我的设计的习惯是尽量减少打印时候的支撑和五金件的使用，因此设计大都采用了利用公差直接连接。由于打印机的误差和不同打印机以及材料的关系，难免有一些过紧或过松的情况，可能有一些地方大家需要打磨下，或使用双面胶收紧一下。&nbsp;需要使用4个686轴承和3个106轴承，一点点羽毛球缠把的手胶，一点点双面胶。具体安装方式请在B站上查看视频，以下是简明的安装说明：<a target="_blank" href="https://www.bilibili.com/video/BV1dg4y1Z72X/?spm_id_from=333.999.0.0" rel="nofollow noopener">https://www.bilibili.com/video/BV1dg4y1Z72X/?spm_id_from=333.999.0.0</a><figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1dg4y1Z72X/?spm_id_from=333.999.0.0"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1dg4y1Z72X&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1dg4y1Z72X&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><ol><li>首先来连接前后轴<ol><li>由于要免支撑打印，因此在做这个转轴的时候才用了这个分离的结构，这样对准卡口放进去，用钳子稍微旋转，感觉紧了就可以了，不要过于用力，不然就拧秃噜了；</li><li>然后扣上这个686轴承待用；</li></ol></li><li>下面我们就用到这2个106轴承：<ol><li>1个扣到这里，预留的公差比较小，可以用个镊子或改锥什么的借个力。</li><li>另外两个同样方式，扣到这里。</li></ol></li><li>下面我们来装齿轮<ol><li>这个驱动齿轮公差留的比较小，安装前要先插上去再拔下来试下；</li><li>然后这样安装到位，悬空的这块先放着；</li><li>锥齿轮也是先把这个轴插拔一下，有时候由打印机的抖动，中间会偏粗，因此有需要的话，可以稍微打磨下；方法也很简单，可以用砂纸，我一般是用钳子这样撸几下就可以了。</li><li>然后压入第3个106轴承，尽量压到底，然后放入这个小的C型环，用来限位置。</li><li>最后用轴承连接上，转一下试试。</li></ol></li><li>然后我们把安装好的转轴压入。这里是参考了拓竹AMS的设计。为了限定转轴位置更准确，这里修改了设计，加了一个小的台阶，因此安装的时候要稍微向外侧掰一点点。</li><li>然后我们把支撑架放入开好口的干燥箱。然后用这个轴套连接。那这两个小的垫片是做什么用的呢？由于干燥箱的侧面不是完全垂直的，有一点点角度，因此可以选装这个垫片，可以让接口的地方更平整。</li><li>如果有对密封性要求比较高的话，这里可以用点胶或加一些TPU的垫圈都可以。</li><li>然后装上可拆卸的旋钮就可以了。上次有网友提出可以用手柄，很好的想法，但我懒得设计了，哈哈，主要这里空间有限，这次加大了旋钮的尺寸，感觉也挺好用的。</li></ol>